Browse : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z  
Featured Products 

Metal Treatment-68

RXSOL ORG LOCO 20™ Locomotive Cleaner

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-41-4165-025
Other Equivalent Brand

Locomotive Cleaner, Locomotive Cleaning Compound

Short Description:
RXSOL ORG LOCO 20™ Locomotive Cleaner is a unique, versatile, multifunctional product that gets outstanding results on most types of tough cleaning chores
Generic Name:
Railway Coach Cleaning Chemicals
RXSOL ORG LOCO 20™ Locomotive Cleaner
Application:
Removes exhaust stains and soot quickly, without leaving shadow stains. Dissolves away road film when used as a diluted pressure washer solution. Exhibits excellent rinse ability, and contains dis [+] Read More...
Using Procedure:
PREPARATION: Make the solution of RXSOL ORG LOCO 20™ Locomotive Cleaner as low as 10%-30% volume  with water for high pressure, heated-rinse-water, automatic washing facilities or as high as 40%-50% for manu [+] Read More...
Note:
Introduction : The RXSOL ORG LOCO 20™ LocomotiveCleaner formulation was originally developed, not surprisingly, as a locomotive cleaner for the railroad industry. Locomotives are very difficult to clean a [+] Read More...
Technical Specifications:

PRODUCT SPECIFICATION/ PROPERTIES

Appearance

:Liquid

Colour

:Clear (Custom Dyes may be added)

Odour

:Slightly bitter or Mild

Specific Gravity

:1.02-1.10

pH

:11-12 (100% Concentration)

Stability

:Stable

Boiling Point

:100°C

Freezing Point

:-5 °C

Flash Point

:Not applicable

Vapour Pressure

:Not Applicable

Stability

:Stable

Remarks:

EQUIPMENT

RXSOL ORG LOCO 20™Locomotive Cleaner is best applied to a locomotive with a low-to-moderate pressure foaming mechanism. Line pressure should be in the range recommended by the foam equipment manufacturer. This is usually in the range of city water pressure, or 30-100psig. Therefore, city water pressure can be used as the motive force to both drive water of dilution through an in-line mixer and suck Locomotive Cleaner into the line in advance of the foamer. Alternatively, Locomotive Cleaner can be applied directly to the locomotive at full strength with nearly any type of low-pressure sprayer. Locomotive Cleaner should be rinsed off using a high pressure sprayer/washer that delivers at least 2000psig at the nozzle discharge. Fan spray-type or wedge-type nozzles can be used for both foam-on and rinse-off operations. Material of construction for pumps, lines, valves, etc. should be mild steel, stainless steel, cast iron or plastic/polymeric.

PROTECTIVE EQUIPMENT

Although RXSOL ORG LOCO 20™ Locomotive Cleaner is non-hazardous and has low levels of aggressiveness to human tissue, it is always wise to prevent cleaners from contacting skin and eye tissue for prolonged or repeated periods of time. Skin sensitization is always possible over time. Use of water resistant gloves,  boots and clothing and goggles or safety glasses plus a face shield and hard hat are recommended, especially for large jobs such as locomotive cleaning.

FUTURE :

  • RXSOL ORG LOCO 20™ Locomotive Cleaner is safe to use, resulting in fewer personnel injuries (e.g., chemical burns and inhalation exposure), reportable injuries, workers’ comp claims, etc. It can be used to clean a wide variety of surfaces without the need for concern about avoiding certain areas, and it will not damage most clothing.

 

  • RXSOL ORG LOCO 20™  Locomotive Cleaner does not present a significant odour or fume exposure problem. It can be used to clean in confined spaces such as shower stalls and bus interiors. RXSOL ORG LOCO 20™ Locomotive Cleaner does not present OSHA or fire regulation problems. RXSOL ORG LOCO 20™ Locomotive Cleaner can be used on most plastic surfaces, vinyl, and vinyl fabrics. Locomotive Cleaner will not fog Plexiglas.

 

  • Spills and leaks do not present a major environmental threat. RXSOL ORG LOCO 20™ Locomotive Cleaner can be shipped in any quantity as Non-Hazardous.

 

  • Oil and grease traps function properly with RXSOL ORG LOCO 20™ Locomotive Cleaner. You can treat and/or dispose of oil and water phases separately. The oil/water de-emulsification and separation is usually very complete leaving a water phase that is relatively clean and neutral in pH. As a result your effluent treatment costs can be significantly lower with RXSOL ORG LOCO 20™ Locomotive Cleaner than with caustic or glycol-ether-based products.

 

  • RXSOL ORG LOCO 20™ Locomotive Cleaner can replace several different cleaners. For example, in an automotive repair shop, it will do an outstanding job of cleaning floors, cleaning and degreasing engines in place, cleaning engine parts as a parts washer solution, cleaning brake pads, cleaning battery terminals, cleaning exhaust soot stains, washing vehicle exteriors, cleaning wheels and tires, cleaning windows, etc.

 

BENEFIT

  • RXSOL ORG LOCO 20™ Locomotive Cleaner contains no caustics or acids.
  • RXSOL ORG LOCO 20™ Locomotive Cleaner contains no solvents, glycol ethers, or terpenes,
  • RXSOL ORG LOCO 20™ Locomotive Cleaner contains no DOT- or EPA-regulated ingredients.
  • RXSOL ORG LOCO 20™ Locomotive Cleaner emulsifies oil and grease efficiently, then de-emulsifies in a relatively short period of time.
  • RXSOL ORG LOCO 20™ Locomotive Cleaner has multifunctional physical/chemical properties.
  • RXSOL ORG LOCO 20™ Locomotive Cleaner is fast acting and penetrating.
  • RXSOL ORG LOCO 20™ Locomotive Cleaner works well in spray on/off applications with little or no wiping, brushing or scraping (as on vehicles, walls, floors, etc.). It saves time due to its ability to act rapidly without physical assistance or many repeat applications.

ADVANTAGE :

  • RXSOL ORG LOCO 20™ Locomotive Cleaner is a mild cleaner that does not burn human tissue. RXSOL ORG LOCO 20™ Locomotive Cleaner will not etch glass, aluminium, or counter tops. RXSOL ORG LOCO 20™ Locomotive Cleaner does not fade most pigments and will not dull or damage most paints or coatings if rinsed off in a reasonable amount of time.
  • RXSOL ORG LOCO 20™ Locomotive Cleaner has no significant VOC content. RXSOL ORG LOCO 20™ Locomotive Cleaner has no flash point. RXSOL ORG LOCO 20™ Locomotive Cleaner will not attack or dissolve most solvent-soluble materials.
  • RXSOL ORG LOCO 20™ Locomotive Cleaner is not classified as hazardous by the DOT. It has no reportable quantity. RXSOL ORG LOCO 20™ Locomotive Cleaner does not have to be inventoried under SARA Title III.
  • RXSOL ORG LOCO 20™ Locomotive Cleaner cleans oil and grease very efficiently and rapidly .Water and oil phases separate in five minutes, depending on waste water total composition.
  • RXSOL ORG LOCO 20™ Locomotive Cleaner cleans all types of dirt very effectively; in fact, in testing, RXSOL ORG LOCO 20™ Locomotive Cleaner did better than all of the major  brands and categories tested. No other cleaner was as versatile.
  • RXSOL ORG LOCO 20™ Locomotive Cleaner works rapidly to penetrate build ups of dirt, grease, and oil. Locomotive Cleaner works effectively on vertical surfaces.

Railway Coach Cleaning Chemicals Locomotive Wash manufacturer and supplier in Mumbai, Varanashi, Saharanpur, Nagpur, Gandhidham Kandla, Chennai, Kolkata, Visakhapatnam, Surat, Fujairah UAE, Abudhabi, Kennya, NAirobi, Muscat Oman, Canada

RXSOL ORG LOCO 20™ Locomotive Cleaner
:
Packing Size:
25.00 Ltr.
Available Packing Size:
Railway Coach Cleaning Chemicals available in 25 Ltrs, 50, 210 Ltrs.
Article News:
,

Corrosion Inhibitor Nitrite Borax based

Product Description | Product Application | Product Notes| Product DOSE
RXSOL-40-4023  is a high performance nitrite based closed circuit inhibitor. RXSOL-40-4023  is a high performance nitrite based closed circuit inhibitor. Nitrite based Corrosion Inhibitor for Wate [+] Read More...
Code:
RXSOL-40-4023-020
Other Equivalent Brand

Accepta 2336

Short Description:
High performance nitrite based closed circuit inhibitor.
Generic Name:
Corrosion Inhibitor
Active Matter:
98-99
Corrosion Inhibitor Nitrite Borax based
Application:
Engine Jacket Cooling or heating system, Chiller Water Circuit, Glycol Brine System, Hot Water or steam Circuit, Engine Coolant,Process chilling and heating system etc.   Engine Jacket Cool [+] Read More...
Using Procedure:
Nitrite base Corrosion Inhibitor for Water and Glycol Brine is normally fed continuously to the re-circulating closed system by injection dosing pump of dosed to the expansion tank. The amount of Nitrite bas [+] Read More...
Note:
Benefit ::: Zero or negligible loss of metal or corrosion Excellent heat transferability and flow rate No need of descaling closed circuit equipments Long and extended life of Water without fouling
Technical Specifications:

Appearance

Colourless 

Odour

Odourless 

pH

11-12 approx

Boiling Point / Boiling Range

Not determined

Melting Point/Melting Range

N/A

Flash Point N/A
Flammability Non flammable
Autoflammability N/A
Explosive Properties N/A
Oxidising Properties N/A
Vapour Pressure Not determined
Relative Density 1.18 approx
Solubility in water  Miscible
Solubility in other solvents  Not determined
Partition coefficient and N-octanol/water  ----------
Other Data None
 
Remarks:
TREATMENT                         Feature
Sodium Nitrate                       Iron and Steel corrosion inhibitor. 800-2500 ppm recommended.
Molybdate                              Slows the growth of bacteria.
Tolyltriazole                            Copper corrosion Inhibitor.
Synthetic polymer                  Prevents hard scale built up.
Borax buffer                           Corrects the water pH (Maintain pH level between 8.5 to 9.2).
Silicates                               A common corrosion inhibitor used by automotive antifreeze suppliers is silicates. Silicates have the disadvantage of building up an insulating layer on components and are not recommended for industrial engines. Concentration should not exceed 25 ppm.

Corrosion Inhibitor Nitrite Borax based for cooling water circulation system manufacturer and supplier in Dubai, Nairobi, Mombasa, Kenya, Uganda, Mumbai, Kolkata, Visakhapatnam, Chennai, Haldai, Ennore, Paradip, Gandhidham, Surat, Canada, Dubai, Sharjah, Ajman, Abudhabi, UAE Middle East, Sohar Barka Muscat Oman

Corrosion Inhibitor Nitrite Borax based
:
Packing Size:
20.00 Ltr.

Scale Dissolver 2000RX

Product Description | Product Application | Product Notes| Product DOSE
Barium based chellating agent which effectively reduced and chellate Metal ion based on Advanced scale dissolver technology.
Code:
RXSOL-68-3071-025
Other Equivalent Brand

BASOL 2000HP

Short Description:
Scale Dissolver delivers the optimal pH conditions for sulphate scale dissolution in many oilfield environments
Generic Name:
SULPHATE scale remover
Scale Dissolver 2000RX
Application:
RXSOL-68-3071-025 control sulphate scale dissolution, Which is most commonly used in many oilfield sector. As a result, scale dissolution rates are rapid with loading capacities of up to 80 g/l deliverable.
Using Procedure:
RXSOL-68-3071-025 Scale Dissolver 2000RX is non-hazardous and non-corrosive allowing its easy transportation to, handling and application at the worksite.
Note:
Technical Specifications:

Typical Physical Properties
Appearance..................................Clear colourless liquid
Density..........................................1.15-1.17 g/cm³ @ 20°C
Pourpoint.......................................<-4°C
Flashpoint,PMCC..........................Not exhibited
pH, concentrated product..............10.0-11.0
Solubility.........................................Water 

Scale Dissolver 2000RX
:
Packing Size:
25.00 Ltr.
Article News:
,

Descaling Liquid 20 Ltr

Product Description | Product Application | Product Notes| Product DOSE
Descaling liquid chemical supplier and manufacturer. RXSOL brand have various grade of Descaler, which having various characteristic and uses.  Chemically this product dissolving various mineral depos [+] Read More...
Code:
RXSOL-16-1008-020
Other Equivalent Brand

LIME-OUT, Cooler Cleaner descaler, DESCALER MTA, SCALESOL,Care Clean HDD, Eazy Descaler, DESCALE IT, 651 571563

Short Description:
Scales are damaging the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all
Generic Name:
Hard Scale Cleaning chemicals
Information:

Chemically dissolve scale deposition from metal surface. RXSOL brand is pioneer in this field. Since 1995 we are continiously working with chemistry of descale to enhance mineral disolving action.

Descaling Liquid 20 Ltr
Application:
Using Procedure:
Note:
Technical Specifications:
Descaling Liquid 20 Ltr
:
Packing Size:
20.00 Ltr.
Available Packing Size:
Lime Scale and hard deposited scale dissolver available in 20 ltr, 25, 50, 210 ltr.

Hydrochloric Acid LR 2.5 Pkg

Product Description | Product Application | Product Notes| Product DOSE
Leading Manufacturer, Supplier and Exporter of Hydrochloric Acid L.R. Grade. Fine quality of Hydrochloric Acid (HCl) LR Grade ( 35-36%) used for Laboratory and many other high end chemicals reaction.
Code:
RXSOL-60-6101-002
Other Equivalent Brand

Muriatic Acid Laboratory Grade, Muriatic Acid, Hydrogen Chloride, Hydrochloric Acid Concentrated

Short Description:
Hydrochloric / Muriatic Acid Laboratory Reagent
Generic Name:
Laboratory Grade HCl
Information:

Hydrochloric Acid Laboratory grade pure acid for Institution and Lab - Industries. Export container full or part load basis facility available with us. In order to process your orders without delay, we request that you provide the required business documentation to purchase this product.
To order chemicals, medical devices products please provide identification that includes your business name and shipping address via email mail@rxmarine.com  .

Hydrochloric Acid LR 2.5 Pkg
Application:
We are keeping various grade of Hcl - hydrochloric acid ar grade, commercial grade hydrochloric acid, hydrochloric acid cp grade
Using Procedure:
Hydrochloric Acid, ConcentratedReagent also available in 100 mL Hydrochloric Acid, ConcentratedReagent  also available 500ML Hydrochloric Acid, ConcentratedReagent 37% also available 2.5L Hydrochloric Aci [+] Read More...
Note:
RX MARINE INTERNATIONAL classified as most convenient platform for export of many lab Chemicals, Acid and solvents LR-Grade to Middle East and Gulf Industries. We are keeping ready stock of Hydrochloric aci [+] Read More...
Technical Specifications:
Appearance Colorless, fuming liquid
Odor Pungent odor of hydrogen chloride
Solubility Infinite in water with slight evolution of heat
Density 1.18
pH For HCL solutions: 0.1 (1.0 N), 1.1 (0.1 N), 2.02 (0.01 N)
% Volatiles by volume @ 21C (70F) 100
Boiling Point 53C (127F) Azeotrope (20.2%) boils at 109C (228F)
Melting Point -74C (-101F)
Vapor Density (Air=1) No information found
Vapor Pressure (mm Hg) 190 @ 25C (77F)
Evaporation Rate (BuAc=1) No information found
Remarks:

Caution: This product is designed for educational and teaching laboratories, and this product is corrosive and toxic.

Hydrochloric Acid  LR 2.5 Pkg
Hydrochloric Acid  LR 2.5 Pkg
:
Packing Size:
2.50 Ltr.
Available Packing Size:
Hydrochloric Acid LR Packing Size, 500ML, 1 LTR, 2.5 LTR, 5 LTR, 25 LTR mail us for Factory Sale Price
Article News:
,

SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS

Product Description | Product Application | Product Notes| Product DOSE
SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS are most popular lubricating agent in LPG BOTTLING PLANTS of IOCL and LPG BOTTLING PLANTS UNDER GUJARAT STATE , LPG BOTTLING PLANTS UNDER BIHAR STATE, Chain Conveyor System at HPCL Hubli and Mysore LPG Plants.
Code:
RXSOL-41-8457-025
Other Equivalent Brand

Liquid soap for LPG plant chain conveyors, Brown Soap Solution, used in Chains in LPG bottling plants, CONKOTE BROWN SOAP

Short Description:
Brown Soap SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS
Generic Name:
Soft Brown Soap for Lubrication of Chain Conveyors in LPG
SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS
Application:
OTHER grades of RXSOL brand " SOAP POLYMER FOR LUBRICATION OF CHAIN CONVEYORS " soap solution contains POLYMER as well as an antibacterial agent. Polymer blend in SOAP solution gives extra smoothness  [+] Read More...
Using Procedure:
Note:
Technical Specifications:

The product is clear with a clean odour.

Important health, safety and environmental information RTU

pH 9.9
Boiling point/boiling range NA
Freezing point NA
Flash point Not Volatile
Flammability (solid, gas) Completely Non Flammable
Explosive properties Not explosive
Oxidising properties Not an oxidiser
Vapour pressure Not Vepourized at room temperature 
Relative density Greater than water
Solubility 100% in water
Specific gravity 1.01
RVOC% 0.00
 
Remarks:

Also called Brown Soap Solution. 

Soft Soap for lubrication of chain conveyors in LPG Bottling Plants under IOAODSO SO.
Work Description, IOAOD LPG Supply of Soft Soap for lubrication of chain conveyors in LPG Bottling Plants. 





SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS
SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS
SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS
:
Packing Size:
25.00 Ltr.
Available Packing Size:
25, 50, 210, 1000 Ltrs IBC Tanks. Specialize product for LPG Bottling Plant. Ready stock and largest supplier in Ennore - Manali - Chennai, Mumbai, Kolkata, Gandhidham, Visakhapatnam, Abu Dhabi

Demulsifier 210 Ltr

Product Description | Product Application | Product Notes| Product DOSE
Oilfield Chemicals Demulsifiers - Demulsifier to successfully separate oil from water. Also suitable for lightest sweet crudes to the heaviest sour crudes.
Code:
RXSOL-16-2064-210
Other Equivalent Brand

Pasetreat 6410, Clarient P 6752, DEMTROL, Separate water in Oil Emusion, Dissolvant Clariant

Short Description:
Can be use as a Separation of emulsified water from crude adsorbent, Sharp interface between crude oil and water.
Generic Name:
Emulsion Breaker to treat light, medium and heavy crude
Active Matter:
90-93
Demulsifier 210 Ltr
Application:
RXSOL DEMULSIFIER is  Water-In-Oil Demulsifiers, which can be used as stand-alone Demulsifiers to separate Formation Water from Crude Oil Emulsion. There are vast differences and Characteristics of Cr [+] Read More...
Using Procedure:
Dose recommendations have to be made on a case-by-case basis. The dosage of RXSOL DEMULSIFIER prescribed to break a particular emulsion varies from as little as 1 ltr per 20,000 Ltrs (50 ppm) of oil to as mu [+] Read More...
Note:
Futrue and Benefit : Contains surface-active materials Separates water from oil Free from defilements Excellent stability Precise chemical composition Easy to Handle. Storage and Handling :  RXS [+] Read More...
Technical Specifications:

Physical Data:

 Physical appearance Clear free flowing brown colour homogeneous liquid
Active Ingredient More then 40 Percent
Specific Gravity @ 25° C 0.92 ± 0.02
Viscosity @ 25° C < 30 cps [cst]
Pour Point < 0° C
ph range 5.0 – 8.0
Solubility in Hydrocarbons Soluble
Solubility in water Insoluble
Flash point ° C >60° C
Shelf Life Minimum two years
Packing 210 Ltrs.
Storage Condition -15 to 55 Degree C
Remarks:
Can be use as a Separation of emulsified water from crude adsorbent, Sharp interface between crude oil and water        
 
Specifications Demulsifies
Coulour   yellow to brown
PH ( concentrated product  5 to 7
Melting / freeze point < -30 c
Flash point at 38 c > 40 c
Density  ( 0.90 to 0.96)
Pour point = -15 c
Viscosity = 15 to 60 cst of 40  

Marine and Oil Field chemicals manufacturer and supplier. Demulsifer direcly indicates emulsion breaker into oil and water phase. This product is most commonly used in Oil field demulsification process. 

Demulsifier most commonly known as oil water separator in Oil field industries. 

Demulsifier best discounted price directly from manufacturer are available through email. As we have reagular supply of Demulsifier in Oil filed industries, so we are keeping ready stock of demulsifier at our all phyisical location of India and UAE.  Click here to get our physical loaction and franchise details   http://rxmarine.com/where-to-buy

DEMULSIFIER CHEMICALS FOR WET CRUDE TREATMENT OF THE FOLLOWING TYPES :

  1. Material to be used in (LUHAIS, BIN-OMAR and ARTAWI) field.
  2. Material should effective and workable for a period of (2 years) from the date of delivery.
  3. Manufacturers to state and guarantee that the specification should be unchanged and must be developed to give good results and to fill full the requirements of (SOC)
  4. In case of any deviation in (Winter or Summer seasons) manufacturers must compensate the balancing quantities.
  5. Manufacturers should send their representatives to follow the activity of materials during the period of contract.
  6. Specifications of out let oil must not exceed:50 ppm salt 0.2% water content
  7. Crude Oil Specification as follow:

 

Item         Option                                       Percent
1 API 32.4°
2 S.G 0.8633
3 Inlet Salt 45,000-60,000 ppm
4 W.C 7-12%
5 TDS WASH WATER 3000 ppm
6 TDS formation water 250,000 ppm
7 Oil Temp. Winter (20-30) C°

8

Oil Temp. Summer (50-60) C°
Viscosity in 21.1 C° 16.64 cSt
10 Viscosity in 37.8 C° 10.30 cSt
11 Viscosity in 50 C° 8.022 cSt
12 Viscosity in 60 C° 6.251 cSt
13 Sulfur Content wt% 1.7
14 H2S Dissolvedin crude oil ppm Nil
15 Wax content wt% 7.9
16 Carbon residue wt% 1.9
17 Pour Point C° C° -26
  • 8. dose of competition should be (25-50) ppm
  • 9. Added Material has no any side effects on the pipe line and exported oil and all other equipment.
  • 10. The bidding should be included supplying (20 drums) of the material to be tested in LUHAIS field and assessment (without depending any previous test) (without any cost), otherwise technical and commercial offers will be neglected.
  • 11. The test of samples make by field and finger print
  • 12.The origin of manufacturer flow improver material (America)
  • 13. Provide with bidding names of companies using the flow improver material and location.
  • 14. The material should be environment friendly type and clearly state the type of process and clarify the best method how to deal with it.
  • 15. The bidding should specify clearly the material life time in the (normal and up - normal ) working condition and the replacement or regeneration recommendation )
  • 16. Delivery period to be (30) days, CIP Basra (S.O.C warehouse). SUPPLYING OF THE QUANTITIES ACCORDING TO (SOC)
    REQUIREMENTS AND THE SCHEDULE OF DELIVERY TO BE AS FOLOWS:
  •  1500 Drums during 3 months
     1500 Drums during next 3 months
     1500 Drums during last 3 months
  • 17. Penalty Rate 20%.
     

Demulsifier bases can be used to treat light, medium and heavy crudes manufacturer, Exporter and supplier in India - Middle East, Oman, Canada. Popular Demulsifier supplier in Fujairah, Sharjah, Ajman, Dubai, Abudhabi, Muscat Sohar Barka Oman, Canada, Kenya, Africa, Uganda, Mumbai, Kandla, Kolkata, Visakhapatnam, Chennai Ennore, Kolkata Haldia Paradip 

Email us to get MSDS, Technical Bulletine of Demulsifier.  Also feel free to mail us to get customized and private labeling option of Demulsifier. 

Pioneer in specialty oilfield production chemicals to treat a wide variety of oil and gas production problems faced by  Oil Field Industries customers.
 
Demulsifiers Offspec Crude from Emulsion in Oil
Water Clarifiers Off Spec Re-Injection or Disposal Water
H2S Scavengers High H2S and Mercaptans
 
Corrosion Inhibitors High Internal Corrosion Rates
Scale Inhibitors Scale Deposition Downhole or in Process
Biocides Bacteria Fouling or Associated Corrosion
Oxygen Scavengers High Oxygen Content in Water
Wax Inhibitors Wax Formation Downhole or in Process
Asphaltene Inhibitors Asphaltene Formation Downhole or in Process
Pour Point Depressants High Pour Point Crude in Winter Conditions
Drag Reducers Pipeline Throughput Limitations
Defoamers Foaming in Process Separators
Demulsifier 210 Ltr
Demulsifier 210 Ltr
:
Packing Size:
210.00 Ltr.
Available Packing Size:
Demulsifier is available in 25, 50, 210, 1000 Ltr IBC tank available at Fujairah, Dubai, Sharjah, Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam.
Article News:
,

Sodium Meta Bi Sulfite Pwd.

Product Description | Product Application | Product Notes| Product DOSE
Sodium Metabisulfite  is an inorganic compound frequently used as a disinfectant, antioxidant and preservative agent.  We are supplier and exporter of Sodium Metabisulfite in Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah - Dubai, Muscat Oman Sohar Barka.
Code:
RXSOL-19-1496-025
Other Equivalent Brand

Sodium Pyrosulfite, 7681-57-4, SMBS, Sodium Meta Bi Sulphite SMBS SWRO, Disodium pentaoxodisulphate, Disodium disulfite, Sodium pyrosulfite, Sodium disulfite

Short Description:
SMBS Used as a disinfectant, antioxidant and preservative agent. It is used as a cleaning agent for potable water reverse osmosis membranes in desalination systems. It is also used to remove chloramine from drinking water after treatment. Also used in printing and dyeing and dechlorination of text
Generic Name:

Sodium Pyro sulphite and Sodium Meta Bi Sulphite SMBS

Did you Know?

 Sodium Metabisulphite used as OXYGEN SCAVENGER in drilling fluid?

Active Matter:
65-67
Sodium Meta Bi Sulfite Pwd.
Application:
Dechlorination  When RO or NF membrane is used in the RO/NF process, the feed must be dechlorinated to prevent oxidation of the membrane. RO membranes have some chlorine tolerance before noticeabl [+] Read More...
Using Procedure:
Reaction : 1> When Sodium Meta-Bisulfite Reacts with water releases sulfur dioxide (SO2).      Released sulfur dioxide SO2 however makes the water a strong Reducing Agent. 2> [+] Read More...
Note:
Mordant; Dechlorinating agent; Reducing agent and sulfonating agent; Bleaching agent for bamboo, wood, paper fiber; Flotation reagent for nonferrous metals; waste water treatment chemical   [+] Read More...
Technical Specifications:

 

Contents

Industrial Standard (best quality)

Specifications

Na2S2O5 % ≤ 

96.0 

97.5

Fe %≤ 

0.005 

0.002

Insol. in water%≤

0.05

0.02

Arsenic ≤

0.0001

0.0001

Properties
Molecular formula    Na2S2O5, Na-O-(S=O)-O-(S=O)-O-Na
Molar mass              190.107 g/mol
Appearance              white to yellow powder
Odor                           faint SO2
Density                     1.48 g/cm3
Melting point    
>170 °C (begins at 150 °C)

Solubility in water    54 g/100 mL (20 °C)
81.7 g/100 mL (100 °C)

Solubility                 Highly soluble in glycerol

Soluble in Ethanol                                                     

Remarks:

EU Index 016-063-00-2 EU classification Harmful (Xn) Irritant (Xi) R-phrases R22 R31 R41 S-phrases (S2) S26 S39 S46

It is used as a cleaning agent for potable water reverse osmosis membranes in desalination systems. It is also used to remove chloramine from drinking water after treatment.

Also used in printing and dyeing and dechlorination of  textile after bleaching , sulphonated agent and reducer of chemical industry and pharmacy.  Bleach of paper pulp,bamboo and timber bleach of stapk treatment agent of waste water , rubber solidifying agent , perfume industry is served as hydrocarbon perfume aldehyde.
 

Molecular Formula

Na2S2O5

Molecular Weight

190.10

White or Yellowish crystalline powder

 

Sodium metabisulfite also called sodium pyrosulfiteits molecular formula is Na2S2O5. SMBS is an inorganic compound. IUPAC name for this inorganinc compound is sodium metabisulphite or sodium pyrosulphite. Now a days Sodium metabisulfite SMBS, also used as a preservative, antioxidant and bleaching agent in food most commonly used for the preservation of fresh & dried fruits, vegetables and wines.
 

CAS number: 7681-57-4
Other names: Disodium pentaoxodisulphate, Disodium disulfite, Sodium pyrosulfite, Sodium disulfite
Chemical formula: Na2S2O5
Molecular weight: 190.11

SMBS most commonly used for the preservation of fresh & dried fruits, vegetables and wines.

SMBS Sodium Metabisulphite, Disodium pentaoxodisulphate, Disodium disulfite, Sodium pyrosulfite, Sodium disulfite exorter and supplier in Kuwait, Muscat Oman, UAE Dubai Sharjah, Abudhabi, Ajman, Fujairah, Canada, Mumbai, Gandhidham, Kolkata, Visakhapatnam, Chennai, Surat, Kenya Africa, Shuaiba, Kuwait, Uganada

Solubility

Soluble in water and its water solubility increases with temperature, 54g/100ml at 20°C and 81.7g/100ml at 100°C. It produces sodium bisulfite (HSO3−) when dissolved in water and the aqueous solution is acidic with the PH 4.0-5.5 (10 % aqueous solution). 

Na2S2O5 + H2O = 2 NaHSO3

Soluble in Glycerin, slightly soluble in ethanol, insoluble in benzene.

Sodium Meta Bi Sulfite Pwd.
Sodium Meta Bi Sulfite Pwd.
Sodium Meta Bi Sulfite Pwd.
Sodium Meta Bi Sulfite Pwd.
:
Packing Size:
25.00 Kg.PWD
Available Packing Size:

RXSOL is keeping ready stock of SMBS Sodium Metabisulphite in various sizes and packing including 500gram / 1 Kg / 5 Kg / 25 Kg / 50 Kg. We have Export-quality of specialized packing of SMBS to avoid any moisture absorbent.

Acid Thickener Rx

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-19-1999-025
Other Equivalent Brand

Atsomyn E-VB,Sudasol AT,Tomamine,Dynal TCM ,

Short Description:
Viscosity Builder for Toilet Cleaner
Acid Thickener Rx
Application:
It is an ethoxylate for preparing high viscosity acid solutions and thus is commonly known as acid thickener. It is most predominantly used in preparing liquid toilet cleaner based on hydrochloric acid.
Using Procedure:
It is used as viscosity builder in acid cleaning and the dosage suggested for building viscosity is 2 to 2.4% depending upon the acid content.
Note:
Advantage :    Imparts very good viscosity at very low dosage. Gives a stable product without any fear of separation later. The product is almost colorless and transparent. This gives a very [+] Read More...
Technical Specifications:
 

Active content

Blend of Ethoxylates (~100%w/w)

Amine Value

120-160

Appearance

Pale yellow viscous liquid

Chemical Nature

Nonionic

Flash point

>250O C

Non volatiles @100OC

98-100%

Solubility

Miscible in water in all ratios

Sp. Gravity at 30 degree C

0.95-1

 
Acid Thickener Rx
:
Packing Size:
25.00 Kg.Liq
Available Packing Size:
25 Kgs. 50 Kgs.
Article News:
,

Turbo Cleaner Dry Walnut Shell

Product Description | Product Application | Product Notes| Product DOSE
Walnut Shell Grit is a hard and fibrous product made from crushed Walnut Shell with international trade standard and it is the most soft type ... Walnut Shell supplier and exporter from India to Midd [+] Read More...
Code:
RXSOL-16-1035-025
Other Equivalent Brand

Turboblaster, Asteroids, DRY WALNUT SHELL FOR TURBOCHARGER CLEANING, GRANULES FOR DRY WASHING OF MAIN ENGINE

Short Description:
Walnut shell for turbo cleaning, filter media, Oil absorption, polishing gems and jewellery and many more.
Generic Name:
Walnut Shell pieces/walnut shell powder
Active Matter:
100
Turbo Cleaner Dry Walnut Shell
Application:
Removal of paint, flash, burrs and other flaws in plastic, alloy die casting and electronics Cleaning automotive parts Cleaning aircraft engines and turbines Removing graffiti Architectural cleani [+] Read More...
Using Procedure:
Walnut shell is soft abrasive for industrial use. Walnut Shell has excellent durability. Walnut shell also used to blast clean and polish soft metals, glass, fiberglass, wood, plastic and stone. Walnut [+] Read More...
Note:
RXSOL group of companies named as one of popular specialize various grade of walnut shell manufacturer, Supplier and largest exporter from India to Middle East.Our walnut shell have various mesh size which [+] Read More...
Technical Specifications:

Wide range of grades available, including custom orders
Gentle – clean surfaces without damaging underlying material
Porous – can be used to absorb contaminants
Organic: renewable and environmentally friendly
100% silica-free
Re-usable
 

Specification : 
Physical Characteristics

Appearance: Brown color, solid natural granules
Size: 1 - 1.5 mm. (new tolerance) Also refer above " Description " section
Corrosive action None
Safety Risk / Advise None
 
Specific Gravity: 1.2 – 1.4
Hardness: 3 on MOHS scale
Moisture: NMT 11% by weight
PH: 7.5
GSA Specification: AA‐1722 Type 2
Chemical Analysis ‐ % by weight Nitrogen: .10
Specific Cellulose: 40/60
Lignin: 20/30
Toluene: .5/1.0
Solubility: 6.5
Military Specification: MIL‐G=5634, Type 3
Methoxyl: 1.0
Chlorine: 1.5
Ash: 1.0
Remarks:

Offer Walnut Shell pieces/walnut shell powder for chemical industrial.

Processing walnut shell pieces, walnut shell powder with any size. We process a large quantity per month and packing as per inquiry.

Product: Walnut shell pieces
Origin: INDIA
Grade:
-walnut shell pieces
-small shell pieces
-walnut shell powder

Packing: 1MT/flexi bag or bulk or as customer’s request in 25 Kg

Supply Location : Fujairah, Mumbai, Kandla, Kolkata, Visakhapatnam, Dubai, Sharjah, Abudhabi
For Export Min quantity: 1x40feet (20MT)
For Local Supply : 25 Kg BAG

Walnut shell grit is the hard fibrous product made from ground or crushed walnut shells. Walnut shells are all natural, 100% silica free making them an environmentally abrasive for delicate blasting processes. The gentle cleaning action cleans surfaces with damaging the underlying material.

RXSOL Turbo Cleaner Dry Walnut Shell is natural organic materials with controlled particle size used for cleaning blades of gas side of exhaust-gas turbochargers in modern diesel engines. The specific structure of RXSOL Turbo Cleaner Dry Walnut Shell is such that when injected by means of compressed air upstream in the gas side of the turbine it causes a slight abrasive action which maintains the turbine is always clean.

Once injected in the turbine RXSOL Turbo Cleaner Dry Walnut Shell burn and disappear into the atmosphere through the stack without causing any detrimental chemical reaction. Although that method is efficient it presents a number of drawbacks such as reduction of the rpm of the engine during the entire cleaning process, which causes a loss of speed. Furthermore there is always the risk of forming corrosive acids in presence of sulfurous residualsin the discharge duct.


Instead of water, dry solid bodies in the form of granules like RXSOL Turbo Cleaner Dry Walnut Shell is used for cleaning. A certain quantity of them, depending on the turbocharger size, is blown by compressed air into the exhaust gas lines before the gas inlet casing On account of their hardness and composition (natural solid granules, size 1.3-1.7 mm.) RXSOL Turbo Cleaner Dry Walnut Shell have an excellent mechanical cleaning eff ect (soft blast). As a rule, a turbine should be cleaned every 24 to 48 hours of operation.

"WITH RXSOL TURBO CLEANER DRY WALNUT SHELL IT IS NOT NECESSARY TO REDUCE THE SPEED OF THE ENGINE."
"THERE IS NO RISK OF CORROTION DUE TO ACID FORMATION."

 

When used regularly, RXSOL Turbo Cleaner Dry Walnut Shell  increase significantly the time between maintenance services. Obviously, maintaining the turbine in a perfectly clean condition gives trouble-free operation and improves efficiency.

Dry Walnut Shell manufacturer, exporter and supplier in Mumbai, Gandhidham, Chennai, Ennore, Kolkata Haldia, Paradip, Visakhapatnam, JNPT Nhava Seva, Fujairah, Ajman, Sharjah, Abudhabi, Dubai, Soahar Muscat Oman, Canada, Africa


Turbo Cleaner Dry Walnut Shell
Turbo Cleaner Dry Walnut Shell
Turbo Cleaner Dry Walnut Shell
Turbo Cleaner Dry Walnut Shell
:
Packing Size:
25.00 Kg Granules
Available Packing Size:
1MT Flexi bag or bulk or as customer’s request in 10, 22, 25, 50 Kg. For Export 25 Kg papper bag X 40 Bag each Pallet.

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : mail@rxmarine.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarine@gmail.com ( This mail is for supplier only )

 

 

Syndicate content