Browse : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z  
Featured Products 

Metal Treatment-68

Degreaser Heavy Duty - 25 ltr

Product Description | Product Application | Product Notes| Product DOSE
Excellent for removal of oil and grease.  Readily soluble in water in all proportions. It is a unique formulation blended from inorganic, organic compounds and detergents with powerful dispersing agen [+] Read More...
Code:
RXSOL-10-1005-025
Other Equivalent Brand

REM-25, Heavy Oil Remover / Drew Clean 2000, Care clean Degreaser GP. Mariclean, Dumbuster Liquid, HDE 777, CLEANER 1155, SEA SHIELD DEGREASER 79115, OSGR, Arrow C180HDD Heavy Duty Emulsifiable Solvent Degreaser, BYCOTEST- C5 CLEANING AGEN, SUPERVIX

Short Description:
Powerful Emulsifiable Solvent Degreaser with dispersing agents. Readily soluble in water in all proportions. It is non-corrosive to metal like copper, aluminium, mild steel and plastic. It is non-toxic which makes handling easy.
Generic Name:
Oil Grease cleaner Emulsifiable Solvent Degreaser
Did you Know?

Heavy Duty Degreaser works effectively, where regular cleaners will not perform

Active Matter:
93-98%
IMPA Code:
551011, 55100, 551002
Degreaser Heavy Duty - 25 ltr
Application:
Complete removal of dirt, oil, carbonised grease, heavy oil , gum, vegetable oil, lube oil, soot, asphalt, carbon stains etc. Gives clear finish to the surface. Excellent for us as a wash for fuel tan [+] Read More...
Using Procedure:
Depending upon contamination 2-25% with fresh water. It is an extremely versatile heavy duty cleaner suitable for use in soak tanks, high pressure washers, automated scrubbing machines and for manual use.
Note:
RXSOL-10-1005-025  is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time. Non corrosive to most of the [+] Read More...
Technical Specifications:
Remarks:

PROEDURE OF USE:-

1st Method:-
Mix 1 part of RXSOL-10-1005-025 with 2 -10 parts of water / GAS-OIL  , For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minute of spray the RXSOL-10-1005-025 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.

2nd Method:-
Application in immersion process with or without ultrasonic support, manual wipping.

3rd Method:- 
RXSOL-10-1005-025 is also used in conjunction with alkaline degreasing bath at 3-5% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.

Heavy duty cleaner Degreaser manufacturer, supplier and exporter. We are keeping ready stock of Degreaser Heavy Duty for supply at Mumbai Port, Kandla port, Sikka, Mundra, Navlakhi, JNPT Nhava Seva, Gos, Manglore, Visakhapatnam - Gangavaram, Chennai - Ennore, Kolkata - Haldia - Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi.

We supply all marine chemicals products & Lubricants .We arrange to supply Shell /Castrol /Servo / Mobil oils, EP2 Grease, Molykote, Molyslip, Aerosol, Silicone, Petrol, Paraffin oil, coal tar, fish oil, tallow, turpentine, white spirit, Teflon coating, Rustolvo, silicon grease, aerosol spray, molyslip, copaslip, greases, degreaser etc...

Heavy duty cleaner Degreaser Specialized powerful marine Industrial Strength classifed Degreaser to perform cleaning and degreasing action on engine, machine parts, & other equipment. Also very effective to clean oily mud surface.

We are supplier and stockist of degreaser at all major Indian ports and Middle East ports. We are popular among Ship Suppliers and Chandlers and shipping agent as a marine chemicals supplier which includes Refrigerant Freon 22, Laundry Soap and Detergents, Cleaner and Polish Goods, Hold cleaning and tank cleaning detergent, Oil spill dispersant, carbon remover, Electrocleaner, Water less hand cleaner, Teepol, Coolant, Glycol, Boiler and cooling water treatment chemicals etc...

Degreaser Heavy Duty manufacturer and supplier in Mumbai, Muscat, Oman, Salalah, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Kolkata, Haldia, Paradip, Visakhapatnam, Chennai, Ennore, Navi Mumbai MIDC

Other Valuable marine chemical Product :::

Evaporator treatment
DCWT non chromate
Purifier disc cleaner
Descaling liquid
Alkalinity control
Marichem CCI
Marizime plus
Phosphate

CHEMICALS AND TESTING KIT NEEDED FOR BOILER AND LLT SYSTEM
Alka test kit 
Chloride test kit
Phosphate test kit
Hydrazine test kit
Nitrite test kit
Chloricool water test
FW testing
L.O test kit

Degreaser Heavy Duty - 25 ltr
Degreaser Heavy Duty - 25 ltr
:
Packing Size:
25.00 Ltr.
Available Packing Size:
5, 10, 20 ltr, 25, 50, 210 ltr. Customized packing with Private labelling option also available to us. Mail us for factory sale heavy discount option.

Corrosion Inhibitor

Product Description | Product Application | Product Notes| Product DOSE
RXSOL-16-1047-210 corrosion Inhibitor is an organic, liquid, cationic corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid and steel during industrial cleaning operations [+] Read More...
Code:
RXSOL-16-1047-210
Other Equivalent Brand

NALCO EC1304A, Cationic corrosion inhibitor designed to inhibit the attack of hydrochloric acid. Acid Corrosion Inhibitor

Short Description:
Corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid on iron and steel during industrial cleaning operations. It also inhibits acid attack on copper and brass. It does not contain arsenic, chlorinated hydrocarbons, or lead compounds.
Generic Name:
Cationic corrosion inhibitor designed to inhibit the attack of hydrochloric acid
Corrosion Inhibitor
Application:
The addition of Acid corrosion Inhibitor RXSOL-16-1047-210,  inhibitors to  Acid solution provides maximum protection for equipment during: a. The removal of lime deposits or water scale from pow [+] Read More...
Using Procedure:
For each 1000 gallons of either 3% or 5 % by weight* hydrochloric acid solution, not less than the following amount of Acid corrosion Inhibitor RXSOL-16-1047-025 should be used: 1 gallon for a cleaning tem [+] Read More...
Note:
Storage and Disposal Acid corrosion Inhibitor RXSOL-16-1047-210 and will not freeze at temperature as low as -20° Fahrenheit. Below 0° Fahrenheit,Acid corrosion Inhibitor RXSOL-16-1047-210 become very vis [+] Read More...
Technical Specifications:

Safety and Handling : 

Before handling the chemical products used in this process, the first aid and handling recommendations on the Material Safety Data Sheet for should be read, understood and followed. The industrial cleaning bath is strongly acid and can burn skin and eyes. Refer to the Material Safety Data Sheet for hydrochloric acid for recommendations for protective action.

Remarks:



Corrosion Inhibitor manufacturer and supplier in Mumbai, Gandhidham, Vizag - Visakhapatnam, Chennai, Kolkata, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat - Oman.


Corrosion Inhibitor
Corrosion Inhibitor
:
Packing Size:
210.00 Ltr.

Peracetic Acid 15%

Product Description | Product Application | Product Notes| Product DOSE
Peracetic acid supplier and Exporter from INDIA. A water like clear & colorless liquid. An aqueous equilibrium solution containing peracetic acid, Hydrogen peroxide, acetic acid and special stab [+] Read More...
Code:
RXSOL-15-1267-015
Other Equivalent Brand

PAA 15%, PAA 5%, P3 Oxonia Active, Peracetic acid (PAA), Peroxyacetic acid, Ethaneperoxy acid, Peroxyethanoic acid, Equilibrium peracetic acid, Proxitane

Short Description:
Peracetic acid is an environmentally safe and versatile anti-microbial agent and a powerful antioxidant
Generic Name:
Also as cooling tower disinfectant
Active Matter:
15
Peracetic Acid 15%
Application:
Sanitizer in breweries, beverage, juices, food processing and equipment : meat, bakery, poultry, sea food and disinfection in hospital (facility sanitization)
Using Procedure:
Formula                                       : CH3COOOH   CAS NO.                                      : 79-21-0   Synonyms                                   : Peracetic acid, Acetyl Hydroperoxide [+] Read More...
Note:
Product performance : Best if used within 12 months and stored at 35ºC MAX   Test Method : Determination of the concentration by titration with Sodium Thiosulphate.   Handling & Storage   Safe [+] Read More...
Technical Specifications:
 Characteristics   Unit  Specifications  Test    Method
Peracetic acid  %w/w        15 min TPL QCWK-6002
H2O2 %w/w          9-12 TPL QCWK-6001
Active Oxygen %w/w         8 min TPL QCWK-6003
Acetic acid %w/w        35 min TPL QCWK-6004
pH of 1% solution      -       3.0 max TPL QCWK-1002
Sp.Gravity @25 + 1๐ C      -       1.0 min TPL QCWK-1009
Color   H.U       15 max TPL QCWK-1008
Appearance      -         Clear TPL QCWK-1008
 
Formula                      : CH3COOOH
 
CAS NO.                     : 79-21-0
 
Synonyms                 : Peracetic acid, Acetyl Hydroperoxide
 
Molecular weight     : 76.05 g/mole
 
Physical and Chemical properties:
 
Form              : Liquid
Color             : Clear, Colorless
Odor              : Strong purgent
Remarks:

Oxidizing agent, causes severe burns. May cause fire. Harmful by Inhalation, in contact with skin and if swallowed.

Peracetic acid is an environmentally safe and versatile anti-microbial agent and a powerful antioxidant. Peracetic Acid can be applied for the deactivation of a large variety of pathogenic microorganisms. It also deactivates viruses and spores. Peracetic Acid activity is hardly influenced by organic compounds that are present in the Water. Peracetic Acid is used mainly in the Food Industry, where it is applied as a cleanser and as a disinfectant. It is applied for bacteria and fungi removal. It was also used for the disinfection of recycled rinsing water for foodstuffs.

 
Peracetic acid is applied for the disinfection of medical supplies and to prevent bio film formation in pulp industries. It can be applied during water purification as a disinfectant and for Plumming Disinfection. Peracetic acid is suitable for cooling tower water disinfection; it effectively prevents bio film formation and controls Legionella bacteria. It’s an alternative for chlorine, sodium hypochlorite and chlorine dioxide. It decomposes into biodegradable components and doesn’t create chlorinated compounds or harmful disinfection by-products.
 
Grades available: PAA 5%, 12%, 15% & 20% (customized concentration can also be explored).
 
Packing: In 30kg and 200kg polythene drums with vented type cap.

HEALTH HAZARD INFORMATION SHEET Peroxyacetic Acid (PAA)

Peroxyacetic acid (also known as peracetic acid or PAA) is an organic peroxide based, colorless liquid with a low pH and a strong, pungent, vinegar-like odor. In the concentrated form it is highly corrosive and unstable. PAA is formed from the reaction of acetic acid and hydrogen peroxide. Commercial PAA products contain all three chemicals in an aqueous solution often with stabilizers added. The concentration of PAA as the active ingredient, as well as the mixture of the other ingredients, can vary widely.

PAA is used in food and beverage industries as well as hospitals, health care and pharmaceutical facilities as an antimicrobial agent, surface cleaner and sanitizer. In many meat and poultry establishments it is used on carcasses, parts, trim and organs to reduce bacterial contamination and foot spoilage. It can be applied by a variety of methods including spray cabinet, dip tank, hand spray pump and chiller.

How are FSIS employees potentially exposed to PAA in their workplaces?

FSIS employees can potentially be exposed to PAA when it is used as an antimicrobial or acidifier in ways that fail to properly contain or ventilate the product. The following are some examples of how IPP could potentially be exposed if controls are not properly in place:

  • Off-gassing from chillers;

  • Over spray from spray cabinet openings and high nozzle pressure;

  • Lack of local exhaust ventilation on spray cabinets;

  • Inadequate ventilation in kill floor area;

  • Direct discharge of waste solution from cabinets and tanks directly onto the floor;

  • Failure to properly control solution pH;

  • Chemical mixing in floor drains; and

  • Hand application with spray tanks.

The latest version of FSIS Directive 7120.1, “Safe and Suitable Ingredients Used in the Production of Meat, Poultry, and Egg Products”, contains a list of PAA containing substances and the concentrations that may be used for specific purposes in meat, poultry and egg product establishments. PAA solutions are currently approved for use in PAA concentrations ranging from 50 to 2,000 parts per million (ppm).

ESHG-Health-03.00 FSIS Environmental, Safety and Health Group (ESHG) 1

What are the potential health effects of exposure to PAA?

Concentrated forms of PAA solution are corrosive and exposure can cause irreversible damage to skin and eyes. When PAA is used in establishments for antimicrobial applications, it is used in diluted concentrations (ranging from 50 to 2,000 ppm in solution). Exposure to PAA in the dilute form as a vapor or mist may sometimes cause eye, nose, throat and respiratory irritation that usually subsides when exposure ceases. Currently, there is no correlation between a specific concentration in solution and the resulting concentration in air or the level of irritation expected. IPP should be aware that, in general, pre-existing respiratory conditions may be aggravated by exposure to airborne irritants.

What OSHA Standards and exposure guidelines apply to PAA?

There are no specific OSHA standards for PAA. The American Conference of Governmental Hygienists (ACGIH) recommends a Threshold Limit Value (TLV) of 0.4 ppm, as a 15-minute Short Term Exposure Limit (STEL). ACGIH also does not consider PAA to be classifiable as a human carcinogen.

The ACGIH TLV is currently used in the meat and poultry industry as a general guideline for determining PAA health exposures. Therefore, when airborne concentrations of PAA exceed this value, action should be taken to limit exposure by leaving the work area until the reason for the elevated concentration can be identified and resolved.

The National Institute for Occupational Safety and Health (NIOSH) is in the process of determining the concentration of PAA that should be considered Immediately Dangerous to Life and Health (IDLH). This document will be updated with that value when it is published.

How are occupational exposures to PAA monitored or measured?

There are no validated OSHA or NIOSH air sampling methods for PAA. Both agencies are investigating and developing a reliable method. This document will be updated when more information if available.

ESHG-Health-03.00 FSIS Environmental, Safety and Health Group (ESHG) 2

There are also several portable, direct reading monitors which are commercially available for sampling PAA. However, these monitors are not specific for PAA but can react to many types of oxidizing chemicals (such as chlorine, ozone and hydrogen peroxide). The monitor sensors are also sensitive to water, humidity and temperature making them difficult to use reliably in many establishments where PAA is used. The FSIS Environmental, Safety and Health Group (ESHG) is currently evaluating these monitors for use in the field.

What safety precautions can be followed to protect FSIS employees against exposure to PAA?

The most effective ways to prevent over-exposure to PAA is to minimize the amount of vapor, mist or droplets that come into direct contact with employees by providing adequate containment, ventilation, and process controls.

Some potential controls that establishments can put in place to minimize exposure are :

• Spray cabinets can be enclosed enough so that significant amounts of mists or droplets are not released through the entrance or exit to the cabinet.
• Local exhaust ventilation can be used to remove mists directly from the

cabinets.
• Clear plastic or stainless steel shields can be used to deflect spray from

contacting inspectors.
• Spray cabinets can be installed as far as practical from inspection stations. • Closed drain lines can be used for wastewater discharges from the cabinets

to the floor drains.
• If there is an issue with chemical mixing in floor drains, a dedicated drain line in the floor troughs can be used to carry the wastewater to an area where discharge will not cause safety issues.

• Adequate general ventilation can be provided using properly designed exhaust fans and fresh air supply units.

• PAA solutions can be monitored and controlled for concentration, pH, and temperature to reduce off-gassing, as specified by the system supplier.

How can an IIC ensure compliance with the OSHA Hazard Communication Standard for this Chemical?

1. The IIC is responsible for ensuring that the requirements of FSIS Directive 4791.5, “Hazard Communication Program” are met.

This includes:

ESHG-Health-03.00 FSIS Environmental, Safety and Health Group (ESHG) 3

• Ensuring the List of Hazardous Chemicals used or stored on site is available in the USDA office as required by Directive 4791.5 Attachment 1 Section II. This list is usually limited to antimicrobials, sanitizers, and refrigerants.

• The Safety Data Sheet (SDS) library location is noted on the signature page of Directive 4791.5 Attachment 1.

• Ensuring hazardous chemical containers are appropriately labeled.

2. The IIC is to provide training to all FSIS employees (including relief inspectors) for all chemical hazards in the workplace. Training includes:

  • Allowing IPP access to and time to read the SDS.

  • The location of hazardous chemicals that IPP may be exposed under routine and emergency conditions.

• Monitoring systems (if any) used to detect the presence or release of a hazardous chemical in the work area.

• How IPP can identify the presence or release of a hazardous chemical (e.g. visual appearance or odor of chemicals).

  • The location of the required list of chemicals.

  • The location of the SDS library.

  • Steps IPP can take to protect themselves from hazardous exposure.

  • Emergency procedures found on FSIS form 4791-21.

4. The IIC can use information from the SDS and the chemical label for training material and any additional information provided by the chemical supplier and/or establishment regarding the working solutions and use concentrations to which IPP may be exposed in their work areas.

All occupational health and safety training is to be recorded using either AgLearn or FSIS form 3530-12. Training records are to include the topics covered, date, and employee name. The Agency is to retain all training records for a minimum of five years.

 Product:              Peracetic Acid (15% Concentration)
                             (Organic Peroxide Type F, Liquid (Peroxyacetic Acid, Stabilised)
CAS No.:              79-21-0
TDS:                     Attached for your kind reference
This product is used in:
Disinfecting & sterilizing equipment and packaging food quality and safety.
Protecting animal health and welfare by disinfecting houses and equipment.
Providing PAA for the final treatment step in Wastewater purification.
Cleaning and disinfecting Industrial laundries used by hospitals and hotels.
Washing fruits, vegetables and meats to protect against harmful pathogens and food spoilage without impacting the food quality.
Oxygenating soil through Irrigation systems in the Agricultural Industry.
Protecting against biofouling in Paper production.  

Peracetic Acid 15%
:
Packing Size:
30.00 Kg.Liq
Available Packing Size:
25 kg. HDPE Drum, 240 kg. HDPE Drum, 1000 kg. IBC

Hydrogen Sulfide Scavenger

Product Description | Product Application | Product Notes| Product DOSE
Hydrogen Sulfide Scavenger -RXSOL-11-5014-210  corrosive and Acidic GAS Remover H2S Scavengers and Speaciality Chemicals to Reduce Hydrogen Sulfide Exposure
Code:
RXSOL-11-5014-210
Other Equivalent Brand

MC MX 2-1106, H2S Scavenger Trizene based, Triazine based H2S scavenger

Short Description:
Removal of hydrogen sulfide gas from process systems, therefore reducing corrosion
Generic Name:
H2S Scavenger Trizene based
Did you Know?

 Hydrogen Sulfide  is a corrosive Acidic GAS which is not only damaging precious instrument but also creating Worker Health  problem by attacking on respiratory system?

Active Matter:
98-100
Hydrogen Sulfide Scavenger
Application:
Hydrogen sulfide (H2S) naturally occurs and may already by present information can be the result of sulphate reducing bacteria (SRB) in your process systems. Ones established, it can potentially be ca [+] Read More...
Using Procedure:
Hydrogen Sulfide Scavenger is works as a corrosive Acidic GAS Remover from system as well as from working station. which is not only damaging precious instrument but also creating Worker Health  problem by a [+] Read More...
Note:
Benefits: Improved safety due to reduced H2S content Meet contract sales limit for H2S content Removal of hydrogen sulfide gas from process systems, therefore reducing corrosion The reactio [+] Read More...
Technical Specifications:

Hydrogen Sulfide Scavenger Manufacturer, supplier, Exporter. Product Code :  RXSOL-11-5014-210 is very effective  corrosive and Acidic GAS Remover. H2S Scavengers and Speaciality Chemicals to Reduce Hydrogen Sulfide Exposure from atmosphere.

Remarks:

Keep coantiner tightly closed and away from direct Heat and sunlight.

HYDROGEN SULFIDE SCAVANGER

MMA Triazine is a cyclic tertiary triamine. It is mainly used as a scavenger for sour gases like H2S and mercaptans in gaseous or liquid hydrocarbon streams

The MMA-triazine reacts with H2S or mercaptan resulting in the formation of dithiazines. Both MMA-triazine and its reaction products are readily biodegradable.

MMA-triazine is available as an aqueous solution with concentration up to 42%.

KEY Feature
• Can be applied in both aqueous and hydrocarbon streams
• Effective removal of H2S down to ppm levels
• Product and its reaction products are readily biodegradable

TYPICAL PROPERTIES
Appearance   Clear, colorless liquid
Autoignition Temperature   190°C
Boiling Point    100% solution149°C
Density    42% solution; at 25°C1.02 g/cm3
Flash Point    Closed Cup88°C
Freezing Point  42% solution <-50°C
Freezing Point100% solution <-27°C

Octanol-water partition coefficient, log Pow   0.76
Vapor Pressure    @ 20°C2.79-3.4 hPa
Viscosity  @ 20°C 13 mPa·s
Viscosity @ 40°C  5.1 mPa·s

Water solubility : Soluble

Also works as BIOCIDE IN OILFIELD DRILLING 

Hydrogen Sulfide Scavenger Manufacturer, Exporter and supplier in India, Middle East UAE, Oman. Also wellknown supplier of Hydrogen Sulfide Scavenger in Mumbai, Muscat, Fujairah, Canada, Ajman, Abudhabi, Dubai, Sharjah, Kolkata, Visakhapatnam, Chennai, Gandhidham, Sohar BArka, Nairobi Kenya

Hydrogen Sulfide Scavenger
:
Packing Size:
230.00 Kg.Liq
Available Packing Size:
25, 50, 230 Kg
Article News:
,

Rust Stain Remover RSR

Product Description | Product Application | Product Notes| Product DOSE
Specially designed for removal of rust from any steel surface area and rust stains from brass, copper, stainless steel, aluminum, wood and ceramic surfaces. Also acts as a surface brightener. It is a h [+] Read More...
Code:
RXSOL-13-1096-025
Other Equivalent Brand

Rust Cleaner, SI-326, RUST AND METAL TARNISH REMOVER

Short Description:
Specially designed for removal of rust from any steel surface area and rust stains from brass, copper, stainless steel, aluminum, wood and ceramic surfaces. Also acts as a surface brightener.
Generic Name:
Rust and metal stain Cleaning Detergent
Active Matter:
81-90
Rust Stain Remover RSR
Application:
MARINE - Rust Stain cleaner  ( foaming nature ) This product is very effective as a spot cleaner after cleaning fats and fatty acids , can be used on painted surface A superior heavy duty and highly [+] Read More...
Using Procedure:
FOR TANK CLEANING RECOMMENDATION : 0.2% TO 100%   FIELD :- specially designed for  removal of rust from any steel surface area and rust stain from Brass , Copper , S.S wood , ceramic and aluminium surfa [+] Read More...
Note:
It is a superior heavy duty and highly concentrated liquid blend of surfactants & organic compounds containing rust penetrating agents , solubilizer and inhibitors. Acts as rust proofing agent before the appl [+] Read More...
Technical Specifications:

PRODUCT PROPERTIES :  

APPEARANCE Clear Yellowish liquid  
DENSITY g/cm3 at 15°C: 1.2  
pH  10% solution 1.5-2.5  
COMPATIBILITY    
METAL Concentrate and long touch may corrode.  
RUBBER No known effect  
PACKAGING Order No.  RXSOL-13-1096-025 Size (in litres)  25 , 35 , 210
Remarks:

RUST stain remover manufacturer, supplier and Exporter. We are keeping ready stock of materials in various packing. And we are also one of largest supplier of Rust Stain Remover in Chennai, Mumbai, Kolkata, Vizag, Kandla - Gandhidham, Surat - Hazira.

Rust Stain Remover RSR manufacturer and supplier in  Mumbai, Kandla, Kolkata, Vizag, Chennai, Fujairah, Muscat, Nairobi - Kenya Africa, Middle East Gulf, Dubai, Ajman, Abudhabi, Sharjah, Muscat Sohar Barka Oman, Canada

Rust Stain Remover RSR
Rust Stain Remover RSR
Rust Stain Remover RSR
:
Packing Size:
25.00 Ltr.
Available Packing Size:
Rust Stain Remover RSR is available in 1 Ltr, 5 Ltr, 25 and 210 Ltr packing.

Muriatic Acid

Product Description | Product Application | Product Notes| Product DOSE
Muriatic Acid supplier and exporter.
Code:
RXSOL-22-2205-025
Other Equivalent Brand
Short Description:
Muriatic acid in forms acidic mists. Muriatic Acid supplier and exporter.
Active Matter:
33
Muriatic Acid
Application:
Using Procedure:
Use neat or dilute depends on nature of cleaning works.
Note:
Commercial Grade The spent acid has long been re-used as iron(II) chloride (also known as ferrous chloride) solutions, but high heavy-metal levels in the pickling liquor have decreased this practice. Th [+] Read More...
Technical Specifications:

PRODUCT SPECIFICATION SHEET

Muriatic  ACID

Parameters

Specification Range

Typical

% Active Content

31.45 – 32.5

32.0

Specific gravity @ 60°F

1.160 – 1.166

1.162

Degree Baumē (Bē)

20.0 – 20.6

20.4

Iron (ppm)

0.5 – 1.0

< 0.5

Color (APHA)

5 - 20

< 5

Total organic compound (ppm)

2 – 5

< 2.5

Oxidizing substance (as cl2 ppm)

0 – 30

< 5

Freezing Point

-49°F

 
 
Remarks:

Muriatic acid in high concentrations forms acidic mists. Both the mist and the solution have a corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines. Upon mixing Muriatic acid with common oxidizing chemicals, such as bleach (NaClO) or permanganate (KMnO4), the toxic gas chlorine is produced. To minimize the risks while working with Muriatic acid, appropriate precautions should be taken, including wearing rubber or PVC gloves, protective eye goggles, and chemical-resistant clothing.

Muriatic Acid
:
Packing Size:
30.00 Kg.Liq
Available Packing Size:
25, 30, 50, 60 STANDARD ACID resistant drum. Ready stock at Chenna - Ennore - Tuticorin, Visakhapatnam - Gangavaram, Kolkata - Haldia - Paradip, Mumbai - JNPT - Nhava Seva, Gandhidham - Kandla - Mundra, Fujairah - Dubai - UAE, Middle East.

Ammonium Persulfate

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-60-6216-025
Other Equivalent Brand

Ammonium Persulfate, AMMONIUM PERSULPHATE COMMERCIAL GRADE

Short Description:
Ammonium Persulphate is a strong oxidising agent
Generic Name:
strong oxidising agent
Active Matter:
99.2
Ammonium Persulfate
Application:
AMMONIUM PERSULFATE is a white crystalline solid. A strong oxidizing agent. Does not burn readily, but may cause spontaneous ignition of organic materials. Used as a bleaching agent and as a food preservative. Ammonium persulfate is a standard ingredient in hair bleach.
Using Procedure:
The most important application for Ammonium Persulfate is in the water-based emulsion polymerisation of organic monomers in aqueous systems. The monomers are either sufficiently soluble in water and precipit [+] Read More...
Note:
Other Name : Ammonium persulfate 7727-54-0 Ammonium peroxydisulfate Diammonium peroxydisulfate Diammonium persulfate Diammonium peroxodisulphate Diammonium peroxydisulphate Persulfate d'ammonium [ [+] Read More...
Technical Specifications:

Appearance (Colour)White
Solubility (Turbidity) 10% aq. solutionClear
Solubility (Colour) 10% aq. solutionColourless
Assaymin. 99%
Acidity (H2SO4)max. 0.2%
Sulphated Ashmax. 0.05%
Chloride (CI)max. 0.0005%
Iron (Fe)max. 0.001%
Heavy Metals (Pb)max. 0.002%
Manganese (Mn)max. 0.0005%
DNase, RNase, ProteaseNot detected

 

C.A.S. : 7727-54-0
Molecular formula : (NH4)2S2O8
Molecular weight, g/mol : 228.18
Appearance : White crystalline salt
APS content (typically) : 99.2 % w/w
Active oxygen (typically) : 7.0 % w/w
Acid content (based on H2SO4,typically) : 0.05 %
Iron content : 1 mg/kg
Bulk density : 1100 g/l
Solubility in water at 10/20/40/60°C : 550/620/700/835 g/l
pH of a 1% solution in water : 4.0
Decomposition of the product  on temperature :  At above 60 °C
Moisture Content : < 0.03 %
Remarks:

Storage : Ammonium Persulfate is hygroscopic and must be stored under dry conditions. It has to be protected from direct sunlight and from any other source of heat.

Ammonium Persulfate is a white, crystalline, odourless salt consisting of technically pure ammonium peroxydisulfate with selected particle size distribution and silicic acid to enhance the free-flowing properties.  Ammonium Persulfate has also been utilized to study protein-protein interactions via photoinitiated crosslinking chemistry. Other applications of Ammonium Persulfate include its use as a reducer and retarder in photography, the manufacture of aniline dyes, electroplating, the decolorizing and deodorizing of oils. A protocol on the APS-mediated modification of polypropylene membranes with polyaniline has been published. Ammonium Persulfate has been used to prepare biodegradable macroporous hydrogels for application as cross-linkable biomaterials. 

Ammonium Persulfate exporter and supplier in Mumbai, Kandla Gandhidham, Surat, Chennai, Visakhapatnam, Kolkata, Tata Ranchi, Paradip, Varanasi, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat Oman, Canada

Ammonium Persulfate
:
Packing Size:
25.00 Kg.PWD
Available Packing Size:
Feel free to ask for any customised packing like 500 Gram, 1 Kg, ( Additional Packing cost is applicable ) 10, 20 Kg Export quality Heavy DUTY JAR. 25 Kgs Bag. Stock available at Navi Mumbai - MIDC, Gandhidham, Chennai - Ennore, Visakhapatnam, Kolkata, Fujairah - Dubai - Sharjah.

Cement Stain Remover

Product Description | Product Application | Product Notes| Product DOSE
Cement Stain Remover is a premium range of cement remover chemical. Useful to clean and eliminates unwanted Cement deposit from surface. 
Code:
RXSOL-63-2202-025
Other Equivalent Brand
Short Description:
Cement Stain Remover is a premium range of cement remover chemical. Useful to clean and eliminates unwanted Cement deposit from surface.
Generic Name:
Cement cleaning chemicals detergent
Active Matter:
63
Cement Stain Remover
Application:
Cement stain remover chemical is highly concentrated which helps to remove the dry hard cement. Its strong formula reacts with dry hard cement to break the bonding strength.
Using Procedure:
Cement Stain remover chemically formulated at high concentration to makes it powerful penetration to remove the dry hard cement. It effectively reacts with dry hard cement to reveal the bonding strength.
Note:
Multiple uses of Cement stain remover helps to clean floor, paver mould, drum of the truck and many more. As a Paver mould cleaning chemicals : Cleaning of Plastic paver mould time to time results more fin [+] Read More...
Technical Specifications:

Technical OLD

Remarks:

Cement Stain Remover is classified Cement Cleaning Chemicals. This product is helpful to clean Cement Mixer machine, Cement stain remover resulting surface in earlier stage.

CEMENT REMOVER CHEMICALS also known as CONCRETE Remover CHEMICALS.

Cement Stain Remover is also known as Concrete Remover Chemical, Cement Remover Chemical, Concrete Dissolver Cleaner Chemical, Concrete Machines Cleaning Chemical, Paver Mould Cleaner Chemical, Plastic Paver Mould Cleaner, Plastic Paver Moulds Cleaner Chemical, PVC Rubber Mould Cleaning Chemical

Classified cleaning chemicals for concrete remover and cement remover

Cement Stain remover manufacturer, exporter and supplier in Barka Muscat Oman, Fujairah UAE Middle East, Dubai, Sharjah, Abudhabi, Ajman, Mumbai - MIDC Mahape, Rabale, Turbhe Koparkhairana, Surat, Gandhidham, Chennai - Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Paradip, Tata, Ranchi, Varanashi, Patna, Nairobi Kenya Africa, Canada

Industrial Area

Cement Stain Remover
:
Packing Size:
25.00 Ltr.
Available Packing Size:
5, 25, 50, 210 Ltr packing of cement stain remover available at all our branches.
Article News:
,

Hydrofluoric Acid 70%

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-68-1322-025
Other Equivalent Brand

HF

Short Description:
Hydrofluoric acid 70
Hydrofluoric Acid 70%
Application:
CAS NUMBER  7664-39-3 ITEM :  Hydrofluoric acid 70% Molecular Weight : 20.01   ( 1.2 [+] Read More...
Using Procedure:
Note:
Technical Specifications:
Remarks:

Severe burns occur after exposure of concentrated (ie, 50% or stronger solution) hydrofluoric acid to 1% or more body surface area (BSA), exposure to hydrofluoric acid of any concentration to 5%

Hydrofluoric Acid 70%
:
Packing Size:
35.00 Kg.Liq

Hydrofluoric Acid

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-19-1322-025
Other Equivalent Brand

HF

Short Description:
Hydrofluoric Acid 70%
Generic Name:
Hydro Fluoric Acid
Hydrofluoric Acid
Application:
CAS NUMBER  7664-39-3 ITEM :  Hydrofluoric acid 70% Molecular Weight : 20.01   ( 1.23 [+] Read More...
Using Procedure:
Note:
Technical Specifications:
Remarks:

Severe burns occur after exposure of concentrated (ie, 50% or stronger solution) hydrofluoric acid to 1% or more body surface area (BSA), exposure to hydrofluoric acid of any concentration to 5%

Hydrofluoric Acid Supplier in Oman Muscat, UAE Fujairah, Sharjah, Dubai, Abudhabi, Ajman, Mumbai, Chennai, Kolkata, Kandla, Visakhapatnam, Canada, Kenya Uganda

Hydrofluoric Acid
:
Packing Size:
25.00 Kg.Liq
Article News:
,

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : mail@rxmarine.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarine@gmail.com ( This mail is for supplier only )

 

 

Syndicate content