Browse : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z  
Featured Products 

Laundry Chemicals-26

Bilge Coat RXSOL

Product Description | Product Application | Product Notes| Product DOSE
Bilge Coat (Sulphur Acid Neutralizer) RXSOL Bilge Coat is highly effective chemicals and an alkaline Solution  for  the Bilge Line and well during the carry of cargo as like Sulphur. This Product a [+] Read More...
Code:
RXSOL-22-2209-025
Other Equivalent Brand

RBM Bilge Coat 30 kg Pack

Short Description:
RXSOL Bilge Coat is highly effective chemicals and an alkaline Solution for the Bilge Line and well during the carry of cargo as like Sulphur.This Product act as a neutrilizer for the collection of Acidic Bilge Water. Bilge coat is more safer and effect
Generic Name:
Acid Neutralizer
Bilge Coat RXSOL
Application:
Dose and Using Procedure • Use a clean Drum or any plastic tank. Fill the water up to 190 Ltrs and add the RXSOL concentrated Bilge coat 2-4 Ltrs. Stirr well and now it is ready RXSOL BILGE COAT SOL [+] Read More...
Using Procedure:
General recommandation 1 Jug per hold, per week.
Note:
Benifit : >Bilge Protection against Acidic Water. >Enviroment Friendly. >Low quantity is sufficiant Due to High Concentration and easy ro transport. >Can be Easly Use and make the solution by Ship Cre [+] Read More...
Technical Specifications:

OCCURS OR SYMPTOMS PERSIST.

INTENDED USE DILUTION RATE
(Concentrate : Fresh Water)
BOXES PER HOLD HANDYMAX
(per week)
PANAMAX
(per week)
Bilge Water (Acidic Water) Neutralizer 1 : 23 (4 ltrs : 92 ltrs water) 20-25 Ltrs 100 Ltrs 125 Ltrs
Remarks:
  • Avoid contact with skin and eyes. Avoid breathing mist
  • and vapors. Always wear protective gloves, goggles
  • and masks. Keep away from oxidizers, acids and
  • metallic powders. Refer to MSDS for more information.
     

FIRST AID MEASURES

SKIN  :  Wash exposed areas with water.

EYES :  Flush eyes with plenty of water for 20 mins.

INHALATION :  Remove patient to fresh air.

INGESTION  : Do not induce vomiting.

Give patient a glass of water or milk.

GET MEDICAL ATTENTION IF ALLERGIC REACTION

Acid Neutralizer is very effective product to neutralize acidic cargo residue. 

#BilgeCoat_PipavaGUJRAT
#BilgeCoatSupplier
#BilgeCoat_UAEoman
#Bilge_CoatMUSCAT
#BilgeCOAT_MumbaiKolkataVizagChennaiParadip

We are in Marine cleaning chemicals and keeping ready stock of Tank cleaning chemicals for tanker vessel and also ship hold cleaning chemicals for Dry Bulk Carriers available ready stock at all Indian and UAE - Middle East coastal. Please feel free to Contact us, we will answer 24 hours, 7 days a week.

Bilge Coat Acid neutrailzer supplier in Kandla - Deen Dayal UPadhya Port, Sikka, Mundra, Hazira, Mumbai, JNPT Nhava Seva, Goa, Manglore, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi. Sohar, Ghala, Ruwi, Barka, Muscat, Oman, Ruwi Barka, Sudan, Yemen, Mombasa

Which is the best ship hold marine cleaning chemicals?

No one can answer this question, As cleaning of ship Bulk carrier is fully depends up on there cargo nature. For example if vessel is carrying cement then Cement Cleaner will works as best ship hold cleaning chemicals similarly for lime cleaning, Lime remover is best while for general cleaning ALKAATUFF Ship Hold Cleaner, Aquabreak high foam.

Corrosive cargo like Sulfur, Salt extremely damaging ship hold metal surface as after getting moisture during transit such cargo releas acid which is highly coroding the metal surface and causing pit on surface. Wise man knows about such chemical reaction between metal and such cargo and before loading they are using polymer based thin layer, which is commonly called Slip PolyCoat - Hold Block.

RX MARINE INTERNATIONAL is one of largest cement cleaner, lime cleaner, ALKAATUFF Ship Hold Cleaner, Aquabreak, Slip PolyCoat and many other various type of marine chemicals in India and Middle East. And we are marine chemicals supplier in Mumbai - JNPT - Nhava Seva, Kandla - Deen Dayal Upadhyay, Mundra, Sikka, Navlakhi, Surat Hazira, Chennai - Ennore, Visakhapatnam, Gangavaram, Kolkata - Haldia - Buz buj, Paradip, Manglore, Goa, Fujairah, Dubai, Abu Dhabi, Sharjah - UAE.

Email : mail@rxmarine.com

Bilge Coat RXSOL
:
Packing Size:
30.00 Kg.Liq
Available Packing Size:
30, 60, 230 Kg Ltr BILGE COAT acid neutralizer available at all Indian And Middle East coastal branches.
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Sodium Chlorate NOT FOR SALE

Product Description | Product Application | Product Notes| Product DOSE
Sodium Chlorate manufacturers, marketers and distributors and exporter. Sodium Chlorate white crystalline powder that is readily soluble in water. It is hygroscopic.
Code:
RXSOL-91-2977-050
Other Equivalent Brand

Sodium Chlorate, Chlorate of soda, Chloric acid, Sodium salt, Sodium Chlorate Crystal, Sodium Chlorite

Short Description:
Sodium Chlorate is used in Paper Industries for permanent whiteness to paper.
Active Matter:
98-99
Sodium Chlorate NOT FOR SALE
Application:
Sodium Chlorate is being mainly supplied to Paper Industries for permanent whiteness to paper. 
Using Procedure:
Note:
Technical Specifications:
 

Properties

Technicals Grade

Pure Grade

Appearance

Light Yellowish Crystals

White Crystals

Purity as Naclo3

98% + (-) 1%

More than 99.4%

Nacl content 0.5% Max. Less than 0.1%
Moisture 1-1.5% Max. Less than 0.2%
Water Insoluble 0.2 % Max. Less than 0.05%
Whiteness (APHA) --------- Less than 17

Sodium Chlorate NOT FOR SALE manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Sodium Chlorate NOT FOR SALE at a competitive price from us. We have ready stock of Sodium Chlorate NOT FOR SALE in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Sodium Chlorate NOT FOR SALE
:
Packing Size:
50.00 Kg.PWD
Available Packing Size:
25 Kgs PP Bags, with LDPE liner, 50 Kgs. PP Bags, with LDPE liner, 1000 Kgs. Jumbo Bags
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

GLYCOLIC ACID

Product Description | Product Application | Product Notes| Product DOSE
Glycolic acid is a CRYSTAL Solid its characteristic properties is colorless, odorless and hygroscopic and highly soluble in water. Glycolic acid is a skin care ingredient that is both an alpha hydroxy [+] Read More...
Code:
RXSOL-60-6604-647
Other Equivalent Brand

GLYCOLIC ACID, Chemical Formula HOCH2CO2H, SKIN CARE PRODUCT

Short Description:
Glycolic acid is a CRYSTAL Solid its characteristic properties is colorless, odorless and hygroscopic and highly soluble in water.
Generic Name:
Hydroxyacetic Acid
Active Matter:
99-99.5
GLYCOLIC ACID
Application:
Glycolic acid should always be applied in the evening, as it makes your skin sensitive to sunlight. Applying it at night gives ample time for it to do its magic without a higher risk or damaging your skin in the sun. But you should still always apply an SPF moisturizer in the morning
Using Procedure:
Wash and dry your hands, then open the tube or bottle of glycolic acid. Pour a small amount onto your fingertips and smooth onto your face and neck. Apply in a thin, even layer. Stay away from the thin, sensitive skin around your eyes and don't place the peel solution on your lips.
Note:
Glycolic acid is an alpha hydroxy acid (AHA) that's widely used for anti-aging, hyperpigmentation, dryness, and acne. Glycolic acid is used to treat the following skin concerns
Technical Specifications:
GLYCOLIC ACID  manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Sharjah, Abudhabi, Middle East UAE, Canada BC, Barka, Sohar, Muscat, Oman, Sudan, Yemen
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
 
GLYCOLIC ACID  is available in small packing as well as in bulk. Buy premium quality GLYCOLIC ACID and other lab chemicals from one of the most trusted brands.
GLYCOLIC ACID
:
Packing Size:
25.00 Kg
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

pH Neutralizer Amine

Product Description | Product Application | Product Notes| Product DOSE
Amine Based pH Neutralizer is a colorless to pale yellow, Hygroscopic viscous liquid with slight ammoniacal odor. We are manufacturer and supplier and exporter of pH Neutralizer.
Code:
RXSOL-24-1461-225
Other Equivalent Brand

NALCO EC 1000A

Short Description:
pH Neutralizer Amine is a colorless to pale yellow, hygroscopic viscous liquid with slight ammoniacal odor. We are supplier and exporter of TEA.
Generic Name:
pH Neutralizer Amine
pH Neutralizer Amine
Application:
T.E.A is used as intermediate in the manufacture of surface active agents, textile specialties, antirust compounds, waxes, polishes, herbicides, petroleum demulsifies, cement additives and cutting oi [+] Read More...
Using Procedure:
Note:
Technical Specifications:

PRODUCT NAME  : AMINE based pH Neutralizer 
Formula         : (HOC2H4)3N
Odour    : SLIGHTLY AMMONIACAL
Solubility in Water    : COMPLETE
Density : More than 1    at 20   oC
Boiling point    : 360 oC
Melting point  : 21 oC
Flashpoint            : 190 oC
Explosive limits      : 1.2 -  Vol%
Vapour pressure       : .03 mbar at 20 oC
Skin absorption/irritation           : YES
TLV       Country  NL             Year  1995   :  
Pollution category  1994 : D
Remarks:

If RXH is not acid enough to release a proton at alkaline pH, as it is the case with amines, then the reaction has to be carried out in two steps. During the first step the first EO mole is added at acid pH, so that the amine is transformed in ammonium. The reaction produce the mono-, di- and tri-ethanol amines. 

Proton release from ammonium NH4 NH+ H(here RXis NH3) Then, the three condensation reactions: 

 

NHEO  NH2CH2CH2OH (mono-ethanol amine MEA)
NH
2CH2CH2OH + EO  NH(CH2CH2OH)(di-ethanol amine DEA)
NH-(CH
2CH2OH)EO  N(CH2CH2OH)(tri-ethanol amine TEA) 

With an alkyl amine, first the alkyl ammoniumion is formed and it is deprotonated: 

RNH3 RNH+ H(here RXis RNH2)
RNH
EO  RNH-CH2CH2OH (mono-ethanol alkyl amine)
RNH-CH
2CH2OH + EO  RN(CH2CH2OH)(di-ethanol alkyl amine) 

Once the ethanol amine is attained, the EO polycondensation is carried out at alkaline pH as previously. In many instance the first ethoxylation is stopped when the monoethanol alkyl amine is formed in order to avoid the polycondensation in more than one chain. 

 PRODUCT NAME  : TRI ETHANOL AMINE 
 CAS number       : 102-71-6
 UN number       :  
 Formula         : (HOC2H4)3N
Odour    : SLIGHTLY AMMONIACAL
Solubility in water    : COMPLETE
Density : 1.13     at 20    oC
Boiling point    : 360 oC
 Melting point  : 21 oC
  Viscosity          :  
 Flashpoint            : 190 oC
 Explosive limits      : 1.2 - ? Vol%
 Vapour pressure       : .03 mbar at 20 oC
 Skin absorption/irritation           : YES
 TLV       Country  NL             Year  1995   :  
 Pollution category    1994      : D
 
RXSOL pH Neutralizer is a clear colorless liquid with a strong ammonia to fish-like odor.Vapors irritate the eyes and mucous membranes. Produces toxic oxides of nitrogen when burned.

Mixes easily with water.

MOLECULAR formula : N(CH2CH3)3

ANTI-LIVERING AGENT(An anti-livering agent is a coating additive used to prevent the increased consistency of a precipitate from forming on a metal surface due to polymerization or other chemical reactions) FOR UREA & MELAMINE BASED ENAMELS; RECOVERY OF GELLED PAINT VEHICLES; CATALYST FOR POLYURETHANE FOAMS; FLUX FOR COPPER SOLDERING.

More application :

Adhesives : Hot melt/Polyesters, Urea/Phenol/formaldehyde, Asphalt/Bituminous, Refractory binders.

Agricultural Chemicals : Neutralize, Algaecide lye peeling assist.

Antistatic Agents : Polyethylene, Polypropylene, Polyamide Polyester, Cotton Fibers, Carpet Backings.

Cement Concrete : Grinding Aid, Fluidity improver strength improver, Mechanical Stability agent, Workability improver, Set Accelerator, Whiteness improver.

Coatings : Water-borne, metal, Glass/film solvent free/Accelerators, Electropheretic.

Coating Remover: Penetrant/Accelerant

Corrosion Inhibitor : In Lub Oils, in Hydraulic Fluids, Coolants with Bactericidal effect, for Aluminium, for Ferrous Metals.

Electroless Plating : Copper

Electroplating : Silver, Tin, Zinc, Cadium, Copper-Nickel, Tin-Nickel, Tin-Cobalt Alloy.

Expoxy: Hardner.

Fuels : High Octane, .Propellent

Inks, Printing : Diazo Dyes, Inks.

Lithography: Developer

Metal Working Cleaning Lubricating : Metal Forming Lubricant, aqueous Lubricant, Cutting Fluid, Cleaners/Degreasers, Etchant.

Mining : Floatation, Dust control

Paint / Pigments : Adhesion improver Thixotropic additive, TiO2 dispersant, Grinding Aid, Pigment dispersant

Petroleum-Coal : Drilling Mud stabilizers, thermal oxidation stabilizers, chemical washes, Tertiary recovery, surfactant, Demulsifier, Oxygen scavenger, Gelling Agent-Fuel.

Polymers : Thermal oxidation stabilizers, Polymerization initiator, Cross-linker, Plasticizer, Chain transfer agent.

Rubber Processing : Vulcanization Accelerator, Stabilizer/ Antioxidant, Activater-filled rubber Dispersant, Chain termination agent.

Soldering Flux : Penetrent.

Textiles : Finishes-Dispersant, Cross linker, Softeners, Lubricant, Bleaching aid, Dye-neutralizers, Fixation catalyst, Extruder cleaner.

Urethanes : Polyol, Chain extender cross linking/curing agent, Catalyst, Modifier, Solubilizer, Degradation waste foam.

Wood Pulping : Swelling Agent.
 

Use industrial and consumer based:
Triethylamine is an important commercial chemical. It is used as a curing catalyst in foundry molds (foundry is a factory in which metals are cast into different shape by keeping in a container or mold after removing which the metal solidifies and gains that shape), and in particle-board adhesives. It is used for the precipitation and purification of antibiotics. It is used for the production of polycarbonate resins. Triethylamine is found in tobacco smoke, two household use products (floor finish, stump and vine killer) and is approved for use in food and food packaging.

pH Neutralizer Amine supplier and keeping ready stock at Chennai - Ennore, Vizag - Visakhapatnam, Kolkata - Haldia, Mumbai - MIDC, Surat - Kandla, Fujairah - Sharjah - Abu Dhabi, Dubai, Sudan, Muscat Oman, Nairobi AFRICA

pH Neutralizer Amine  ready stock in various size and packing. pH Neutralizer is chemically alkaline amine based products which is also used as surfactant emulsifier and neutralizing acidic value to adjust pH chemical nature. TEA most commonly used in Fragrance Ingredient; pH balancing Adjuster; As a Surfactant - Emulsifying Agent; also as BUFFERING and MASKING agent.

#pHneutralizer_IndiaUAEoman
#pHadjuster_ManufacturerSupplier
#AmineNeutralizer

pH Neutralizer Amine
:
Packing Size:
210.00 Kg.Liq
Available Packing Size:
25 and 55 Kg, 220 Kg
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Bleaching Liquid

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-26-1500-005
Other Equivalent Brand
Short Description:
Bleaching Liq Chlorine Liquid
Bleaching Liquid
Application:
Using Procedure:
Note:
Technical Specifications:
Bleaching Liquid
:
Packing Size:
5.00 Ltr.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Fabrics Laundry Softner Fabsoft

Product Description | Product Application | Product Notes| Product DOSE
Fab Soft makes all washables cloth soft and fluffy  during laundering . Makes ironing easier and helps to eliminate chafing , static cling . Clothes stay fresh, wear longer and wrinkle less. it can be [+] Read More...
Code:
RXSOL-15-3009-001
Other Equivalent Brand

Laundry Softner, UNICA SOFT, Clax Soft, Softener 1 Kg Pack

Short Description:
Fab Soft makes all washables cloth soft and fluffy during laundering . Makes ironing easier and helps to eliminate chafing , static cling . Clothes stay fresh, wear longer and wrinkle less. it can be added at the beginning of the laundry cycle at the sam
Generic Name:
Towel Softener and Conditioner
Active Matter:
81-85
IMPA Code:
550124,
Fabrics Laundry Softner Fabsoft
Application:
Excellent for blankets, sweaters, sheets, towels, pil­low cases, lingerie, diapers, work clothes, hosiery, wool, delicate articles etc or any other washable materials. Addition of little RXSOL FAB-S [+] Read More...
Using Procedure:
  Add 100-150 ml of product to final clear rinse water for a 40-50 Ltrs wash. " or " Dosage recommendation: 10 ml/ kg dry goods      Do not rinse again with clear water or for CONDITIONING OF ext [+] Read More...
Note:
Avoid freezing. Avoid contact with skin , Wash away on cotact . If splashed into eyes, flush with clear water and apply a commercial eye wash product .  If ingest­ed, drink large amounts of water. Contact [+] Read More...
Technical Specifications:
 
Appearance ::: Thin blue liquid
pH neat 3.2
Relative Density at 20°C 0.996
Safe handling and storage information Store in original closed containers or (where applicable) in an approved bulk tank, away from extremes of temperatures. 
 
This product is based on quaternary ammonium salts. In the wash solution, these positively charged cationics, adsorb to the negatively charged surface of fabrics. Once adsorbed onto fabric the cationic has a lubricating effect. During the drying process, this prevents interlocking of individual fibres and build-up of static electricity (especially on synthetic fibres). In addition lubrication facilitates ironing/calendering.
Remarks:

Always pour this product into water, not on clothes.

Please note that this product should not be used on: • articles made of micro polyester fibres such as cleanroom garments and water repellent theatre linen and cleaning microfibre cloths/wipes. 

Fabric Conditioner and softener Laundry chemicals and detergent manufacturer and supplier in Mumbai, Fujairah Sharjah Dubai Abudhabi Ajman, Muscat Barka, Nairobi, Kolkata, Vizag, Gandhidham, Chennai, Canada, Africa

Fabrics Laundry Softner Fabsoft
:
Packing Size:
25.00 Kg.Liq
Available Packing Size:
5 ltr.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Bleach for Colour Safe OxiBrite

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-41-8731-025
Other Equivalent Brand

Peroxide Bleach, OXI SOL

Short Description:
Peroxide bleach does not disinfect and is commonly added to laundry detergents which are advertised as color-safe.
Generic Name:
Brighten materials also facilitate the removal of stains
Bleach for Colour Safe OxiBrite
Application:
NOTE! Always test the durability and color stability ready-to-use solution preparation before proceeding. Leave on for 20 to 30 minutes and check if there are no changes colors. 
Using Procedure:
For tough stains pre-treat with RXSOL-41-8731-025 Do not use neat on metallic parts (eg. buttons, metallic embroidery) or rust stains. Add detergent as usual 1 Main Wash. Add detergent as usual. [+] Read More...
Note:
Future & Benefit : Colour Safe Bleach OxiBrite is an oxidising additive used to brighten white, off-white or pastel shade fibres or fabrics. Can be added to extraction detergents. Dissolve in [+] Read More...
Technical Specifications:

Properties :

Appearance : Liq / Granular Powder.
Colour : Clear / White.
Odour : Odourless
pH : 9.5
Solubility : Soluble in water.
Remarks:

NOTE! Always test the durability and color stability ready-to-use solution preparation before proceeding. Leave on for 20 to 30 minutes and check if there are no changes colors. 

Color-safe bleach uses hydrogen peroxide instead of sodium hypocholorite. While peroxide is a bleaching agent, it doesn't affect the dyes in many types of fabrics, so it won't change the fabric's color. If unsure whether your colorful clothing or other fabrics will hold up to a color-safe bleach, test it by pouring a small amount of the color-safe bleach on an inconspicuous area of the fabric and let it sit for 30 minutes or so before rinsing it out.

 

Irritating to eyes and skin.
Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed seek medical advice immediately and show this container or label. Do not mix with other bleaching agents. After use, rinse hands thoroughly or especially in case of sensitive skin, wear gloves. The hydrogen peroxide contained in Ace may have a temporary and reversible effect on the skin (e.g. whitening).

  • Can be used for 'last resort' treatment of difficult tea and coffee stains. Colour Safe Bleach OxiBrite produces controlled 'bleaching' and therefore should be used with caution on all fibres. For professional and industrial use only.

    • Is OXI BRITE safe to use in my Bathroom and septic tank?

      The only by products of OXI SOL are oxygen, water, and soda ash. These natural elements do not harm the home or the environment. By the time the oxiclean mixture gets into a septic tank, most of the oxygen has already been released into the air. Any oxygen left over will not hurt the bacteria in an anaerobic septic system.

    • Nature of stains does it remove?

      OXI BRITE works extremely well on organic stains like wine, food, pet messes and more! 

    • Can I use it with Chlorine Bleach? 

      No! OXI BRITE is a bleach alternative and works by itself. Do not mix it with bleach as they will neutralize each other and can create dangerous gases and heat. If mixed in a poorly ventilated room, breathing the fumes created by this mixture can be fatal.

    • Is it ok to use on my colored clothing? 

      Yes. The cleaner is color safe. It is much safer for colored fabrics than chlorine bleach and can help increase the life span of your clothes. However, not all clothes are colorfast. You should test for colorfastness before applying.

    • Suitable temperature should I use when mixing OXI BRITE?

      You should always mix oxiclean in hot (not boiling) water to completely dissolve and release all of the cleaning power of the crystals. Oxibrite will work in cold water, but takes longer to activate than in hot water.

    • Can I let it stand on a soiled area over time?

      Yes, it's OK to allow oxiclean to stand on a soiled area. However, it is best to wipe soiled areas clean before oxiclean solution has dried completely as it stops working when it dries out.

      Does it neutralize odors?

      Yes. OXI BRITE deodorizes and works to neutralize odor causing substances.

This is An oxidising agent additive which can be used with carpet and fabric cleaning solutions to brighten light colours and help remove tea, coffee, jute and cellulosic browning stains and water marks. Colour Safe Bleach OxiBrite is Oxidising additive for white, off-white and pastel coloured fibres and fabrics.

Today, bleach is found in nearly every household. It whitens fabrics and removes stains by a chemical reaction that breaks down the undesired color into smaller particles that can be easily removed by washing. The two types of household bleach are chlorine bleach and peroxide bleach. Peroxide bleach helps to remove stains, especially in higher wash temperatures, it will not bleach most colored materials and does not weaken fabrics, as does sodium hypochlorite bleach. Peroxide bleach does not disinfect and is commonly added to laundry detergents which are advertised as color-safe. It also has a longer shelf life than chlorine bleach. Peroxide bleach is more commonly used in Europe, where washing machines are manufactured with inner heating coils that can raise the water temperature to the boiling point.

The more common form of household bleach is chlorine bleach. It is most effective in removing stains and disinfecting fabrics. Chlorine bleach is cheap to manufacture and effective in both warm and hot wash temperatures. However, it has strong chemical properties which can weaken textile fibers.

OXIBRITE is a powerful oxygen based alkaline cleaner that attacks the toughest organic dirt including mildew, blood, pet messes, mold, wine, juice, baby formula and much more. After removing your stains, OXIBRITE  will break down into harmless oxygen and sodium carbonate. OXI SOL  works over time, and some stains will require several treatments for best results. OXIBRITE  has no odor so you clean without the harmful fumes. For the most effective stain removal, follow the mixing instructions on this instruction sheet using the lightest solution suggestion first and increase the cleaning solution as needed.

This is An oxidising agent additive which can be used with carpet and fabric cleaning solutions to brighten light colours and help remove tea, coffee, jute and cellulosic browning stains and water marks. Colour Safe Bleach OxiBrite is Oxidising additive for white, off-white and pastel coloured fibres and fabrics.

Today, bleach is found in nearly every household. It whitens fabrics and removes stains by a chemical reaction that breaks down the undesired color into smaller particles that can be easily removed by washing. The two types of household bleach are chlorine bleach and peroxide bleach. Peroxide bleach helps to remove stains, especially in higher wash temperatures, it will not bleach most colored materials and does not weaken fabrics, as does sodium hypochlorite bleach. Peroxide bleach does not disinfect and is commonly added to laundry detergents which are advertised as color-safe. It also has a longer shelf life than chlorine bleach. Peroxide bleach is more commonly used in Europe, where washing machines are manufactured with inner heating coils that can raise the water temperature to the boiling point.

The more common form of household bleach is chlorine bleach. It is most effective in removing stains and disinfecting fabrics. Chlorine bleach is cheap to manufacture and effective in both warm and hot wash temperatures. However, it has strong chemical properties which can weaken textile fibers.

Add detergent as usual
1 Main Wash. Add detergent as usual.
In addition to the cleaners:   Mix 15 ml (1 measure) the preparation Oxibrite with 5 liters of finished   to use solution of the cleaning extraction or shampoo. Oxibrite   must be previously dissolved in a small amount of hot water.

For the removal of brown spots and stains from coffee and tea: mix 30 ml (2 scoops) of the formulation   Apply foam using only   sponges   or Brush the stained place so that   the foam surface was slightly larger than the same spots and allow to dry.   Do not rinse. If the stain is not completely removed repeat the action after drying   surface. For larger areas carpets, which are brown discoloration or stains from the water, you can use   spray   and   brush to rub   or   rotary machine   for application of the formulation. For best results, the mixed solution should be used   within 30 minutes.


Hand Wash
Add 100ml of RXSOL-41-8731-025 and your usual detergent. Add garments and soak for up to 1 hour. Rinse thoroughly.

Tips for Safe Washing: Do not mix with detergent in same dosing ball or in the detergent drawer. If in doubt about colour fastness, test RXSOL-41-8731-025 on a hidden part of the fabric. Do not pre-wash, overload machine or put the dosing ball in the drier. In case of accidental spillage, mop up immediately using plenty of water. Do not let Ace dry on the fabric or expose to direct sunlight as damage may occur. Do not use on carpets or when 'dry-cleaning only' is recommended. Only use when recommended by manufacturer on curtains, cushion covers, or other soft furnishings.

 

EXTRA STRONG SOLUTION
Use the squirt bottle that is enclosed, or use any clean spray or squirt bottle. Mix 1 scoop (2 tablespoons) with 1 pint of warm to hot water. Mix or shake thoroughly. Product will remain active for six hours.

SOAKING SOLUTION
Mix 1-4 scoops of OXI SOL per gallon of hot water.

Use the guidelines below when cleaning:

Carpet, Carpet Padding, Couches, and Upholstery
To de-stain and deodorize your carpet, start by mixing a general cleaning solution. Remove as much of the dirt or liquid as possible. Squirt OXI SOL on spot and let stand 5-10 minutes. Rinse thoroughly by pouring fresh water over spot, soak up with a clean cloth or towel and vacuum thoroughly when completely dry. Always test for colorfastness before applying OXI SOL.

Curtains, Sheers, Wedding Dresses, and Tennis Shoes
To de-stain and deodorize curtains/sheers that are yellow, dingy or smoke-stained, mix a soaking solutionand allow items to soak 30-60 minutes. Rinse thoroughly with fresh water and let dry. For wedding dresses and tennis shoes, use warm water and begin with a light solution of OXI SOL (1-2 scoops per gallon). Soak 10-20 minutes, rinse thoroughly with fresh water, and let dry. 

Laundry Stain Removal
Add one scoop of OXI SOL to each load of laundry in addition to your regular detergent. OXI SOL will boost your laundry detergent’s cleaning power and is safe on most fabrics including jeans and colors. Do Not Use On Wool Or Silk. For extra tough laundry stains, fill the washing machine with hot water, laundry detergent and OXI SOL (1-4 scoops) and turn machine off. Allow to soak 30-minutes up to overnight. Run machine as usual after soaking. 

Carpet Cleaning Machines
Add 1 scoop of OXI SOL per gallon of warm water. Use OXI SOL with a carpet cleaning solution to increase the cleaning power. 

Ice Chests & Garbage Cans
Mix a soaking solution directly in the ice chest or garbage can, allow to stand for 1 hour up to overnight. Rinse thoroughly. 

Mops and Sponges
Mix a general cleaning solution in a bucket or sink, place mop or sponge into bucket and let stand for 30-60 minutes. Rinse thoroughly. 

Tile & Grout Cleaning
For light maintenance on porcelain tubs, tiles, sinks and toilets, mix a general cleaning solution. Spray on, scrub lightly and rinse thoroughly. For extra tough mold and mildew, make OXI SOL into a paste and apply. Let stand for 1 hour up to overnight, scrub and rinse thoroughly. 

Jewelry & Dentures
For jewelry, use 1/8 of a scoop of OXI SOL in 4 cups of water and soak for 5-10 minutes. Rinse thoroughly and dry with a soft cloth. To de-stain and deodorize dentures, soak in a general cleaning solution for 1 hour up to overnight, rinse thoroughly. 

Cutting Boards, Tupperware, and Kitchen Counter Tops
To clean and deodorize your whole kitchen, use a general cleaning solution and apply with a soft cloth, squirt bottle or sprayer, let stand 5-10 minutes and rinse. For extra strong stains, soak item with an extra strong solution for 15-20 minutes, rinse thoroughly. 

Coffee Pots
To de-stain your coffee pot add one scoop of OXI SOL directly into a coffee pot of hot water, soak 10-15 minutes and rinse thoroughly. To remove build up inside the coffee maker, mix a general cleaning solutioninto squirt bottle, allow solution to cool completely, then pour into coffee maker. Turn on coffee maker and allow solution to run through machine. Rinse by running cold, fresh water through the cycle. 

Refrigerators
To eliminate mold, mildew and other organic stains, mix a general cleaning solution in a squirt bottle and apply with a soft cloth, let stand 10-20 minutes, wipe and rinse thoroughly. 

All Weather Carpeting, Fencing, Concrete, Siding, Wood Decks, and Stucco
To remove weathered stains from wood decking, fencing, siding, concrete, and stucco, use a general cleaning solution and apply with a clean lawn sprayer. Let stand 10-30 minutes, scrub if necessary and rinse thoroughly. Or mix a general cleaning solution in a bucket and apply with a broom or brush, then scrub and rinse thoroughly. 

Window Awnings, Patio Umbrellas, Wicker Furniture, Lawn Furniture
To remove weathered stains and dirt from your outdoor patio furniture, mix a general cleaning solution and apply with a lawn sprayer, or mix OXI SOL in a bucket and apply with a scrub brush or broom. Let stand 10-30 minutes and rinse thoroughly. 

Pet Stains & Urine
OXI SOL will clean and deodorize carpets, carpet padding and upholstery stained with pet messes. Always test for colorfastness first. Remove dirt or soak up liquid thoroughly before applying OXI SOL. Mix a general cleaning solution of OXI SOL in the squirt bottle, apply to affected area and let stand for 5-10 minutes. Rinse thoroughly with fresh water and soak up with a clean cloth or towel. Vacuum area when completely dry. 

Fireplaces & Bricks
Use the general cleaning solution and apply to fireplace or bricks with a scrub brush or broom, allow to stand 10-20 minutes and rinse thoroughly with fresh water. Scrub before rinsing if necessary. 

Water Damage Cleanup & Mildew Removal
To remove mold and mildew prior to painting or to clean up water damage, mix a soaking solution, apply to surface, and scrub with a brush or sponge. Let stand 20-30 minutes and rinse thoroughly. 

Shower Curtains
To remove mold and mildew from shower curtains, mix a soaking solution, let shower curtain soak for 30-60 minutes, scrub if necessary and rinse thoroughly. 

  • For the removal of brown spots and stains from coffee and tea: mix 30 ml (2 scoops) of the formulation   B151 Oxibrite, 60 ml (4 scoops) preparation   B162 Fibrebuff   and 250 ml of   B105 Fibre Shampoo   5 liters   hot water.  
    Apply foam using only   sponges   or Brush the stained place so that   the foam surface was slightly larger than the same spots and allow to dry.   Do not rinse. If the stain is not completely removed repeat the action after drying   surface. For larger areas carpets, which are brown discoloration or stains from the water, you can use   spray   and   brush to rub   or   rotary machine   for application of the formulation. For best results, the mixed solution should be used   within 30 minutes.
Additional information: 
* 15 mL = 1 scoop. 
Each pack contains one scoop.

CAUTION - Always pretest for colour fastness and stability with ready-to-use solution before proceeding. Allow 20 to 30 minutes for possible colour change.Cleaning additive: Mix 15ml (1 measure scoop) of Colour Safe Bleach OxiBrite  per 5 litres of ready-to-use extraction or shampoo solution. Pre-dissolve the Colour Safe Bleach OxiBrite  in a small amount of hot water.

Tea, coffee and jute browning stains: Mix 30ml (2 measure scoops) of Colour Safe Bleach OxiBrite , 60ml (4 measure scoops) of deterghent in 5 litres of warm water. Apply the foam only by sponge or brush to affected area, feathering out over a slightly larger area and allow to dry. Do not rinse. When dry, repeat process if staining has not been completely removed. On larger areas of browned or water marked carpets, application can be made by sprayer and brush or rotary machine. For best results mixed solutions should be used within 30 minutes.

Bleach for Colour Safe OxiBrite
Bleach for Colour Safe OxiBrite
Bleach for Colour Safe OxiBrite
Bleach for Colour Safe OxiBrite
Bleach for Colour Safe OxiBrite
:
Packing Size:
25.00 Ltr.
Available Packing Size:
1, 5, 10, 20, 25, 50 Ltrs
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Bentonite Powder

Product Description | Product Application | Product Notes| Product DOSE
Bentonite Supplier for Oil Field Industries. It is a drilling-grade Bentonite which is naturally occurring clay. It is a High Yield Natural Sodium montmorillonite. It meets API 13A Standards. Bentonit [+] Read More...
Code:
RXSOL-81-8101-050
Other Equivalent Brand

Bentonite API, Montmorrilonite

Short Description:
Maximum swelling property, while combine with water, Our fine quality of sodium bentonite having more water absorption capacity then ordinary one.
Generic Name:
Sodium Montomorillonite
Information:

 Bentonite premium quality products exporter from India to Middle East - Dubai.

IMPA Code:
25081090
Bentonite Powder
Application:
• It is Viscosifier and Filtration control agent for water based Mud Systems. • It is used in drilling muds for controlling bore hole stability. It is utilized in drilling muds to extract drill cutti [+] Read More...
Using Procedure:
Bentonite can be Broadely classified in 2 grades :   Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in t [+] Read More...
Note:
Advantage • It helps improve hole cleaning capacities of drilling fluids. • It is effective as a filtering agent. • It promotes borehole stability. • It can be added directly to fresh water or fresh water based drilling fluids.
Technical Specifications:

Difference Between Sodium Bentonite and Calcium Bentonite :

Bentonite is naturally occurring hydrated Alumina Silicate, there are two main varieties, calcium and sodium, where sodium Bentonite is the more commercially important. Calcium Bentonite deposits are much more common than sodium Bentonite deposits. However, calcium Bentonite can be changed to sodium Bentonite by the ion exchange process. The swelling type or sodium Bentonite, which has single water layer particles containing Na+ as the exchangeable ion. The other has double water layer particles with Ca++ as the exchangeable ion. It is called calcium Bentonite or non-swelling type.The clay-water characteristics are of primary importance. The chemical composition of the Bentonite is a consideration only because changes in physical properties accompany changes in chemical composition. Sodium Bentonite swells or expands to a greater degree than its calcium equivalent. Small percentage of cation exchange sites are occupied by another ion, such as calcium, a state is developed in the clay which promotes both optimum swelling and fastest hydration. Sodium Bentonite has higher swelling capacity, this property develops higher viscosity in suspensions, greater state of disaggregation, formation of smaller clay particles or greater colloidal properties.

Composition of Bentonite

Percentage value

Part Number

 RXSOL-81-8101-050

 
SiO2  70,A2%
Ai2O3  15.9,A1.5%
Fe2O3  2.3,A0.1%
FeO  0.95,A0.1%
CaO  0.96, A0.1%
MgO  1.91, A0.1%
NaO  1.80, A0.1%
TiO2  0.04, A0.01%
K2O  0.78, A0.01%
Caustic Soda  0.55, A0.1%
 
 
 
 
 
 
 
 
Caustic Soda 0.55, A0.1%
TiO2 0.04, A0.01%
TiO2 0.04, A0.01%
TiO2 0.04, A0.01%
TiO2 0.04, A0.01%
TiO2 0.04, A0.01%
K2O 0.78, A0.01%
K2O 0.78, A0.01%
Remarks:

 

Physical State

:Free Flowing Powder

Viscometer Dial reading at 600 r/min

: Min 30

Yield Point/Plastic Viscosity Ratio

: Max 3

Residue of diameter greater than 75um

: Max mass friction 4,0%

Filtrate Volume

: Max 15.0 Cm3

Moisture

: 10% wt percent max

Various grade of Bentonite :::

Drilling Grade 1

API 13A Section – 9 Grade Bentonite Powder:

Physical Analysis:

PROPERTIES

PROTOCOL

UNIT

REQUIRED

RESULT

Viscometer Dial Reading at 600 rpm

API Spec. 13A:2004/ ISO 13500: 1998

r/min

30

36

Yield Point / Plastic Viscosity Ratio

API Spec. 13A:2004/ ISO 13500: 1998

_

3 Max

2.5

Filterate Volume

API Spec. 13A:2004/ ISO 13500: 1998

ML

15 Max

14.6

Moisture Content

API Spec. 13A:2004/ ISO 13500: 1998

% by weight

10.0 max.

10

Dry Screen Analysis(Residue Greater than 75 Microns)%

API Spec. 13A:2004/ ISO 13500: 1998

% by weight

4.0 max.

3.0 - 4.0

 Drilling Grade API Packing 25 Kgs 

 

IOP Grade Bentonite lumps :

Properties

Protocol

Unit

REQUIRED

Moisture Content

API Spec. 13A:2004/ ISO 13500: 1998

% by wt.

12% to 40 % max. 

LOI

IS:2000(P-1)-1985

% by wt.

5 – 10.

Free Swelling Volume 2gm/100ml

ASTM D 5890:1995

ml 

32 min.

PH Value of 5% gel 

IS:6186-1986

pH

8.0 – 10.0

Plate Water Absorption  (16 hours)

ASTM E 946

%

720- 760

Gel Time 2.5gm/25 ml

IS:12446-1988

second

Instant

Methylene Blue Value

API spe 131:2004/ ISO 10416:2002

mg/gm of clay

350 - 400 

Lumps size

IS:6186-1986

%

10 to 40 m.m.

Chemical specification:                                           

Alumina as AL2O3%>15.0-19.0                                 Sodium max 2.70

Calcium as  Cao%1.5-2.0                                           Na2O      2.0-2.5

Mgo  2.5-3.5                                                            iron as Fe2o3% 13.0-18.0

 

IOP Grade Lumps | 25 Kg Packing 

Product: Benotonite Powder for Grouting

Physical Analysis:

Properties

Protocol

Unit

Result

Liquid Limit

IS:12446-2007

ml/100 gm

350 - 450

Moisture Content

API Spec. 13A:2004/ ISO 13500: 1998

% by wt.

12.0 Max

Dry Screen Analysis (passing through 75 um sieve)

IS:12446-2007

% by. Wt.

85.0 min.

Free Swelling Volume 2gm/100ml

ASTM D 5890:1995 or IS:12446-2007

ml 

30 min

PH Value of 5% gel 

IS:12446-2007

pH

9.5  - 10.0

Gel Time 2.5gm/25 ml

IS:12446-1988

second

Instant

Filterate Volume

API Spec. 13A:2004/ ISO 13500: 1998

ml

20 max

Viscosty at 600 rpm

API Spec. 13A:2004/ ISO 13500: 1998

 

30 min

Methylene Blue Value

API spe 131:2004/ ISO 10416:2002 / IS:12446-2007

mg/gm of clay

350 - 400

 
Grouting Grade | 25 Kg Packing
 


PRODUCT: Ceramic Grade Bentonite Powder

Physical Analysis:

Properties

Protocol

Unit

Result

Free Swelling Volume 2 gm/100ml

IS:12446-2007

ml

12 - 18

Base Exchange Capacity

IS:12446-2007

 

70 - 80

Moisture Content % by weight

IS:12446-2007

%

10.0 - 12.0

PH Value  2% slurry

IS:12446-2007

0pH

8 - 9

Quartz Content

IS:12446-2007

%

2 - 3 %

Dry Mesh % Passing 200 B.S.S

IS:12446-2007

%

85 Minimum

 
Ceramic Grade  | 25 Kg Packing

<

Bentonite Powder manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Bentonite Powder at a competitive price from us. We have ready stock of Bentonite Powder in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Bentonite Powder
Bentonite Powder
Bentonite Powder
Bentonite Powder
:
Packing Size:
50.00 Kg.PWD
Available Packing Size:
50 Kgs, 1000 Kgs Jumbog Bag, 1500 Kgs Jumbo Bag
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Oleic Acid

Product Description | Product Application | Product Notes| Product DOSE
An unsaturated fatty acid that is the most widely distributed and abundant fatty acid in nature. It is used commercially in the preparation of oleates and lotions, and as a pharmaceutical solvent. O [+] Read More...
Code:
RXSOL-14-1538-210
Other Equivalent Brand

OLEICACID 210 LTR PACK

Short Description:
An unsaturated fatty acid that is the most widely distributed and abundant fatty acid in nature. It is used commercially in the preparation of oleates and lotions, and as a pharmaceutical solvent.
Generic Name:
Oleic acid is a Fatty acid colorless to yellowish
Oleic Acid
Application:
Oleic acid as its sodium salt is a major component of soap as an emulsifying agent. It is also used as emollient. Small amounts of oleic acid are used as an excipient in pharmaceuticals, oleic acid i [+] Read More...
Using Procedure:
Oleic acid is used as a component in many foods, in the form of its triglycerides. It is a component of the normal human diet, being a part of animal fats and vegetable oils. Oleic acid as its sodium salt [+] Read More...
Note:
Oleic acid is soluble in benzene, chloroform, ethanol, ether, hexane, fixed volatile oils and practically insoluble in water. INCOMPATIBLE WITH:-  Aluminum, Calcium, Heavy metals, Iodine solution, Perchl [+] Read More...
Technical Specifications:
OLIEC ACID - REGULAR
Test Results

Acid Number

 
190m
Sap Number
192m
Iodine Number Max.
100.0
Unsap matter % Max.
1.0
Titre, °C
20M
Ash % Max.
0.10
Appearance at 30°C
Pale Amber liquid
Remarks:

On exposure to air it gradually absorbs oxygen and darkens in color and develops a more pronounced odour. It decomposes when heated at 80 to 100 °C. 

An unsaturated fatty acid that is the most widely distributed and abundant fatty acid in nature. it is used commercially in the preparation of oleates and lotions, and as a pharmaceutical solvent. Major constit. of plant oils e.g. olive oil (ca. 80%), almond oil (ca. 80%) and many others, mainly as glyceride. Constit. of tall oil.

Also present in apple, melon, raspberry oil, tomato, banana, roasted peanuts, black tea, rice bran, cardamon, plum brandy, peated malt, dairy products and various animal fats. Component of citrus fruit coatings. Emulsifying agent in foods Oleic acid is a monounsaturated omega-9 fatty acid found in various animal and vegetable fats. The trans isomer of oleic acid is called elaidic acid.

High Purity Oleic Fatty Acids
oleic acid exporters in Africa, oleic acid exporters in Bangladesh, oleic acid exporters in middle east, oleic acid exporters in Pakistan, oleic acid exporters in Southest Asia, oleic acid manufacturer in india, oleic acid manufacturer in mumbai, oleic acid suppliers in india, oleic acid suppliers in mumbai, oleic acid suppliers in Mumbai, Kolkata, pune, Vizag Visakhapatnam, Chennai, Ennore, Surat Gujrat, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, Muscat Barka, Ruwi Oman, Sudan Yemen
Oleic Acid Manufacturers & Suppliers in India UAE Middle East Oman Sudan Yemen
.
 
We are a oleic acid Manufacturers in India, Exporters, Suppliers, Distributors, Traders and Exporters of High-Quality API, Lornoxicam, Ethyl Oleate, Linagliptin, Bromhexine.
Our Oleic Acid main Exports in Markets, Africa, Middle East, South, Latin America, Southeast Asia, SAARC, Pakistan and Bangladesh are dealers.
 
Oleic acid is a fatty acid that occurs naturally in various animal and vegetable fats and oils. It is an odorless, colorless oil, although commercial samples may be yellowish. In chemical terms, oleic acid is classified as a monounsaturated omega-9 fatty acid, abbreviated with a lipid number of 18:1 cis-9.
 
It has the formula CH3(CH2)7CH=CH(CH2)7COOH.  It is the most common fatty acid in nature. The salts and esters of oleic acid are called oleates.

Oleic Acid Manufacturer and suppliet in Mumbai, Navi MUMBAI MIDC, Gandhidham, Chennai, Visakhapatnam, Kolkata, Odisha, Bihar, Fujairah, Dubai, Ajman, Sharjah, Abudhabi, Middle East UAE, Muscat Barka, Oman, Canada, Sudan, Yemen, Nairobi Kenya AFRICA

Oleic Acid
:
Packing Size:
210.00 Ltr.
Available Packing Size:
Oleic acid is available in 5 Ltr, 25, 50, 90 200. Oleic acid is a fatty acid. It is an odorless, colorless yellowish oil. The oleic name derives from the Latin word oleum, which means oil
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Chlorhexidine Gluconate

Product Description | Product Application | Product Notes| Product DOSE
Chlorhexidine, also known as chlorhexidine gluconate, is a disinfectant and antiseptic that is used for skin disinfection before surgery and to sterilize surgical instruments. It may be used both to [+] Read More...
Code:
RXSOL-14-8979-010
Other Equivalent Brand

Biguanide, 1,1- Hexamethyle and Digluconate (5-(p-Chlorophenyl)-Digluconate ‘1.6-nis (5(p-Chlorophenyl))- Digluconate

Short Description:
As per WHO World Health Organization ALCOHOL HAND RUB is beneficial against VIRUS, Bacteria.
Generic Name:
Chlorhexidene Gluconate
Chlorhexidine Gluconate
Application:
We are manufacturer and can offer you our Chlorhexidine Gluconate in 50ltr jars and 200ltr barrels and the same can be repacked in smaller packs and sold in your local market. Chlorhexidine Glucona [+] Read More...
Using Procedure:
Usual Adult Dose for Gingivitis Usual dose: 15 mL (approximately 0.5 fluid ounces) swished in the mouth undiluted for 30 seconds and spit out 2 times a day Usual Adult Dose for Mucositis Usual dose [+] Read More...
Note:
We have very good discount schem for given quantity : Chlorhexidine Gluconate in 5ltr jar for 200ltr minimum order quantity  Chlorhexidine Gluconate in 20ltr jar for 200ltr minimum order quantity Chlorh [+] Read More...
Technical Specifications:
 
Product name Chlorhexidine Gluconate solution 20% IP
Description Almost colorless and odorless liquid
Solubility Miscibility with water. Soluble in acetone and ethanol(95%)
Identification To comply with IP test
                        TLC test- Positive
                        Pale purple colour produced- Positive
                        Deep red colour test-Positive
Residue melt 135.2'C
Weight per mL 1.06 at 20'C
pH 6.10
Remarks:
Related Substances- complies with IP tests
4- Chloroaniline- Not more than 0.25% calculated with reference to Chlorhexidine solution at a norminal concentration of 20%w/v
Assay- Not less than 19% w/v and not more than 20% w/v of C22H30Cl2N10, C6H12O7 -195.60g/l
Colour test- Absorbance not more tham 0.03 at 480nm
Relative density-1.063 

Related Substance by HPLC

Impurities                          N.M.T 0.3%  0.014%
Impurities L  N.M.T 0.2%  0.109%
Impurities Q N.M.T 0.2%  0.025%
Impurities N N.M.T 1.0% 0.098%
Impurities B N.M.T 0.2% 0.038%
Impurities F N.M.T 0.2% 0.011%
Impurities A N.M.T 0.4% 0.017%
Impurities H N.M.T 0.5% 0.226%
Impurities O+I N.M.T 0.4% 0.026%
Impurities J N.M.T 0.4% 0.023%
Impurities K N.M.T 0.4% 0.040%
Unspecified Impurities N.M.T 0.1% 0.090%
Total  Impurities  N.M.T 3.0% 0.909%

Chlorhexidine gluconate manufacturer and supplier in Fujairah, Muscat, Oman, Dubai, Sharjah, Abudhabi, Ajman, Mumbai, Kolkata, Gandhidham, Surat, Chennai, Visakhapatnam, Sudan, Nairobi Kenya Africa, Yemen

Chlorhexidine Gluconate

Chlorhexidine Gluconate
:
Packing Size:
5.00 Ltr.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : rxmarinechemical@gmail.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarinechemical@gmail.com ( This mail is for supplier only )

 

 

Syndicate content