Browse : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z  
Featured Products 

Metal Treatment-68

PRELOAD Slip HOLD BLOCK

Product Description | Product Application | Product Notes| Product DOSE
Polymer based Hold coating product, Easy to apply on SHIP HOLD SURFACE.  Slip Barrier Coats HOLD BLOCK is POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface aft [+] Read More...
Code:
RXSOL-20-2210-210
Other Equivalent Brand

PRELOAD 300

Short Description:
Polymer BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.
Generic Name:
Resulting thin transparent temporary Polymer film
Active Matter:
72-75
PRELOAD Slip HOLD BLOCK
Application:
RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels , which carrying corrosive and / or messy cargos  such as sulphur salt petcock coal and concentrates. It can be easily removed [+] Read More...
Using Procedure:
for HANDYMAX  (5 Holds) : In general  500 Ltr to 1000 Ltr   RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while for PANAMAX [+] Read More...
Note:
This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials. Precaution : 1 > Deposition of previous cargo /  Lime wash should be remove [+] Read More...
Technical Specifications:
  • Product metal against corrosive cargo
  • Products paint against cargo penetration
  • Environmentally friendly
  • Safe to  use in occupied / covered areas
  • Reduces turn around times
  • Easy to direct spray
  • If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
  • Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective  equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
  • And don’t forget procedures  have to be drown up and your
  • Crew  trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time
Remarks:

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

Hold Block, Slip Barrier Coats HOLD BLOCK, Preload 

Ship hold protective layer coating chemicals. Polymer based water soluble Slip Barrier Polymer Coats HOLD BLOCK is easy to use. There is no any special technical method required to applied on hold surface. Simply dilute the Slip Barrier Polymer Coat with water and spread on entire hold area from top to bottom side. Extra liquidcoming towards bottom can be recollected to cover uncoated area. Simple spray method is helpfull to save time of application.  NOTE - Before application of Slip Barrier Polymer Coat Hold Block clean entire hold surface area and make sure dust free.

Slip Barrier Polymer Coats HOLD BLOCK formulated to perform maximum protection to wards hold surface during transport and save lot of time during unloading operations as cargo doesn't adhere towards hold surface. After unloading of cargo when Aquaatuff High Foam is applied to Slip Barrier Polymer Coat treated hold surface all cargo residue get off without any extra manual force requirement.

Slip Barrier Polymer Coats HOLD BLOCK RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly .
$ Safe to use in occupied / covered areas.
$ Reduces turn around times .
$ Easy to Direct Spray.

Other Important materials , which help to control corrosion on metal surface. Chemically SULPHUR producing STRONG acid in presence of  moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and usingprocedure.

RXSOL Bilge Coat (Sulphur Acid Neutralizer)  Acts as Acid Neutralizer formed during sulphur voyages

Before loading of cargo Slip Barrier Coat paint/film can be wise decision to save time for next cargo. As Slip Barrier Coat hold block acts as the barrier film in between cargo and holds surface, So deposition of cargo directly on hold is not possible, and it can be removed easily without scrapping. And Slip Barrier Coat also provide protection against corrosiveness of cargo bye product.
 
Application of Slip Barrier Coat is just like a lubricant, As it is water soluble polymerized products. This product can be simply spray on the entire surface by manually or through spray machine. And after application of Slip Barrier Coat Its removal is also very easy process. Only by using hold wash with water can remove all coating of Slip Barrier Coats HOLD BLOCK.
 
As before application of Slip Barrier Coat, Proper uses of hold cleaning chemicals like RXTUFF ALKALINE or ALKAATUFF can save required qty of Slip Barrier Polymer Coats HOLD BLOCK as hold block coating.

Slip Barrier Polymer Coat and Slip Barrier Polymer Coat plus MSDS available with each and every drum. And MSDS also can be download through our website directly by using USER NAME and password. 

Ready stock of Slip Barrier Polymer Coat Preload supplier in Gandhidham - Kandla, Mundra, Kolkata - Haldia, Visakhapatnam - Gangavaram, Chennai - Ennore, Mumbai - Nhava Seva, Surat in India and  Fuajirah - Dubai, Sharjah in GULF - Middle East.

Also we are keeping ready stock of Muriatic Acid, ALKATUFF High Foam ship hold cleaning chemicals, PCS, Coal Remover, Lime Remover,  Alka cleaner etc... Full range of marine chemicals.
PRELOAD Slip HOLD BLOCK
:
Packing Size:
210.00 Ltr.
Available Packing Size:
25, 50, 210 Ltrs. Mail us for Factory sale discounted price. Keeping ready STOCK at Kandla, Mundra, Sikka, Mumbai, Chennai - Ennore, Visakhapatnam, Kolkata - Haldia, Goa, Mangalore, Paradip, Fujairah - Dubai, Sohar, Muscat - Oman
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Soil Cutter HD

Product Description | Product Application | Product Notes| Product DOSE
Its unique and heavy duty formula Quickly Cuts Into Grease & Tough Soil Deposits. Which eliminates Time & Labour Saver For Heavy Duty & General Maintenance Cleaning. pH  DEGREASER & CLEANER
Code:
RXSOL-26-1710-025
Other Equivalent Brand

SOIL OUT, SOILUX LAUNDRY

Short Description:
Heavy duty Grease & Soil Cutter Its unique and heavy duty formula Quickly Cuts Into Grease & Tough Soil Deposits . which eliminates Time & Labour Saver For Heavy Duty & General Maintenance Cleaning.
Generic Name:
Laundry Soil Cutter
Soil Cutter HD
Application:
Due to fast reaction It Penetrates deeply into concrete surfaces.  Formula contains low-foaming emulsifiers and is biodegradable, phosphate free, rust-inhibitive, nonpolluting and nonflammable.  Spec [+] Read More...
Using Procedure:
This highly concentrated, low/medium-foam cleaner/degreaser instantly dissolves and emulsifies heavy dirt, grease, oils, detergent film and many other surface stains. 
Note:
Description: A special blend of  water based chemical solvents for tough, heavy duty cleaning Instantly dissolves & emulsifies grease, oils & other heavy soil deposits. Rust-inhibiting formula. [+] Read More...
Technical Specifications:

Very effective and suitable for loading washing machine and for manual wash . Formulated with with optical brightener to further brighten clothing, Softening agent and pleasant fragrance to ensure clothing are soft  and fresh  after  rinsing  and spin dry.

Remarks:

Grease Soil Cutter HD manufacturer and supplier in Muscat Barka Oman, Fujairah Dubai Sharjah Abudhabi Ajman UAE Middle East, Nairobi Kenya Africa, Mumbai, Gandidhdam Gujrat, Vizag Visakhapatnam, Chennai Tamilnadu, Kolkata Bengal, Canada

Soil Cutter HD
:
Packing Size:
20.00 Kg.PWD
Available Packing Size:
Soil Cutter Laundry Cleaning chemicals available in 5 Kg, 20 Kg and 50 Kg Pack
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Descalant Chemical

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-51-1008-025
Other Equivalent Brand

LIME-OUT, ANTISCALLENT, DESCALER MTA, SCALESOL, Care Clean HDD, Eazy Descaler, DESCALE IT, 651 571563, Max Clean 05, Diesel Engine Cooler Descaling Chemical, Highly Effective Descalant Chemical SG 1202, Maxtreat 3002 Engine Cooler Cleaner 25 Ltr

Short Description:
Scales are damaging the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all
Generic Name:
Descaler Highly Effective Descalant Chemical
Active Matter:
68 - 72%
Descalant Chemical
Application:
Boilers, Calorifiers, Heat exchanges, diesel engine cooling system, Condensers, Evaporators & other types of equipment where rust & scale form.. Heat Losses in Boiler due to scale Thi [+] Read More...
Using Procedure:
RXSOL-11-1008-025  is mixed with fresh water 3 to 20 percent depending on deposition of scaling. The most effective method is circulation for large systems or components like boilers, evaporators, conden [+] Read More...
Note:
After using  RXSOL-11-1008-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025, at least 2-4 hour , up to neutral of PH value. • Fast and effective scale remover. • Soft on ferrous met [+] Read More...
Technical Specifications:

 

Automotive - Closed Circuit Cooling, Dynamometers, Extruders, Molders, Radiators, Welders

Bottling - CO2 Generators, Heaters, Exchangers, Rinse Tanks, Sterilizers, Washers

. HOUSE HOLD - Dissolves hard and old lime scale deposits from your appliances. It extends the life of the appliance and saves running cost. It can be used in appliances such as Washing Machines, Dish Washers, Geysers, Steam Iron, Coffee Makers, Bath Tubs, Bathroom Fixtures etc.

Buildings - Chillers, Cooling Towers, Pipework

Chemicals - Dryers, Extruders, Kettles, Mixers, Reactors, Scrubbers, Vacuum Pumps

Food - Condensers, Ice Machines, Kathabars, Refrigeration Equipment, Steam Tables

Manufacturing - Chillers, Compressors, Furnaces, Quenchers, Vacuum Pumps

Metals - Bearings, Castings, Fans, Hearth & Vacuum Furnaces, Shelters, Sprays

Mining - Bearings, Conveyors, Filters, Presses, Process Lines, Radiators

Paper- Calendar Mill Rolls, Caustic Lines, Scrubbers, Compressors, Liquor Tanks, Pulverizers, Vacuum Pumps

Pharmaceutical- Exchangers, Loop Systems, Kathabars, Pumps, Reactors, Stills, Sterilizers

Refinery - Compressors, Converters, Crackers, Exchangers, Piping, Pumps

Rubber/Plastics - Banbury Mixers, Calendar & Mill Rolls, Extruders, Injection Molders, Molds, Temperature Control Units, Throat Coolers, Towers, Tubers

Steel - Bearings, ConCast Units, Generators, Hearths, Spangle Units, Furnaces

Textile - Air Washers,Compressors, Condensers, Exchangers, Extruders,Towers

 

Boilers

Condensers

Filters

Heat Exchangers

Kettles & Tanks

Pipelines

Pots

Reactors

Steam Jackets

Bath Rooms and Showers

Metal Processing and much more!


 

Applications


  Automotive

  Bottling

  Chemicals

  Food

  - Closed Circuit Cooling

  - Dynamometers

  - Extruders

  - Molders

  - Radiators

  - Welders

  - CO2 Generators

  - Heaters

  - Exchangers

  - Rinse Tanks

  - Sterilizers and Washers

  - Dryers

  - Extruders

  - Kettles

  - Mixers

  - Reactors

  - Scrubbers

  - Vacuum Pumps

  - Condensers

  - Ice Machines

  - Kathabars

  - Refrigeration Equipment

  - Steam Tables

  Manufacturing

  Metals

  Mining

  Paper

  - Chillers

  - Compressors

  - Furnaces

  - Quenchers

  - Vacuum Pumps

  - Bearings

  - Conveyors

  - Fans

  - Hearth & Vacuum Furnaces

  - Shelters

  - Sprays

  - Bearings

  - Conveyors

  - Filters

  - Presses

  - Process Lines

  - Radiators

  - Calendar Rolls

  - Mill Rolls

  - Caustic Lines

  - Scrubbers

  - Compressors

  - Liquor Tanks

  - Pulverizers

  - Vacuum Pumps

  Pharmaceutical

  Refinery

  Rubber & Plastics

  Steel

  - Exchangers

  - Loop Systems

  - Kathabars

  - Pumps

  - Reactors

  - Stills

  - Sterilizers

  - Compressors

  - Converters

  - Crackers

  - Exchangers

  - Piping

  - Pumps

  - Banbury Mixers

  - Calendar & Mill Rolls

  - Extruders

  - Injection Molders

  - Molds

  - Temperature Control - Units

  - Throat Coolers

  - Towers and Tubers

  Bearings

  ConCast Units

  Generators

  Hearths

  Spangle Units

  Furnaces

  Textile

  Utilities

  Other Applications

   

  - Air Washers

  - Compressors

  - Condensers

  - Exchangers

  - Extruders and Towers

  - Boilers

  - Turbines

  - Transformers

  - Cooling Towers

  - Air Compressors

  - Hydrogen Coolers

  - Lube Oil Heat Exchangers

  - Ball Mills

  - Demisters

  - Evaporators

  - Locomotives

  - Absorption Units

  - Diesel Generators

  - Induction Furnaces
Remarks:

Suggestion ::: Our daily descaling works helps to share helpful tricks to dissolve hard scale easily, Always use 5-10 %  our new generation hard scale deposit remover powder RXSOL-11-1102-025 . Addition of RXSOL-11-1102-025 helps to clean 100% scale from system .

A powerful sequestrant and descaling chemicals for iron scales dissolving and cleaning in BOILER and COOLING system.

Descaling Liquid manufacturer and supplier in Navi Mumbai MIDC, Mumbai, Nashik, Pune, Taloja MIDC, Rabale, Turbha, Pawana MIDC, Gandhidham, Kandla, Jamnagara, Mundra, Sikka, Surat, Hazira, Kolkata, Haldia, Paradip, Visakhapatnam, Chennai Ennore, Goa, Manglore, Dubai, Sharjah, AbuDhabi, Ajman, Diera, UAE Middle East, Oman Muscat - Barka, Nairobi Kenya Africa, Uganda

Highly Effective Descalant Chemical.
Introduction:
RXSOL Highly Effective Descalant Chemical is a powerful descaling chemical. Recommended for descaling if pipelines, heat exchangers, boiler tubes, vessel
jackets, cooling coils etc.

Product Specifications:
Appearance : Pale Yellow to Dark Yellow liquid
Specific Gravity : 1.02 – 1.26
pH : Acidic

Features:
>> Chemically Stable. Shelf life: 3 Years from date of manufacturing.
>> Available in liquid form, can be dosed easily.
>> It is incorporated with powerful corrosion inhibitor. After descaling is done, the base metal is protected.
>> Can be used for on line descaling
>> Removes hard, difficult to remove scales.
>> Heat transfer is improved.
>> Can be used for ferrous and non-ferrous metals.

Dosage:
The dosage required depends on system water chemistry and operating conditions.
RXSOL Highly Effective Descalant Chemical should be diluted with water before circulation. In case the scaling is more, or descaling is done for the 1st time,
the dilution should be done in the ratio of RXSOL Highly Effective Descalant Chemical : Water :: 1: 5
For routine, preventive maintainence purpose, the dilution can be done upto: RXSOL Highly Effective Descalant Chemical : Water :: 1:10
Our technical representative shall study the system and recommend the required dosage.
We undertake the descaling on contract basis, in which, our expert representative carries out the descaling program at
your site.

Storage and Handling
The product is supplied in HDPE corbouys. It should be stored in a cool and dry place. The shelf life is 36 months from
date of manufacture.

DO NOT USE CONTAINERS FOR POTABLE WATER STORAGE.
USE OF PERSONNEL PROTECTIVE EQUIPMENTS LIKE HAND GLOVES, SAFETY GOGGLES, FACE MASK ARE
HIGHLY RECOMMENDED WHILE HANDLING THE PRODUCT.
In case of contact with skin, immediately wash with copious amount of water and soap. In case of eye contact, immediately flush with large amount of water for at least 15 minutes and get medical attention Refer to Material Safety Data Sheet for proper handling and storage of the product.
Descalant Chemical
:
Packing Size:
25.00 Ltr.
Available Packing Size:
Descalant for iron removal Descaling Liquid Descaler available in 20 ltr., 25, 50ltr and 210 ltr packing.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Molten Salt

Product Description | Product Application | Product Notes| Product DOSE
Salt inhibited with the corrosion inhibitor resulting corrosion protection, as well as efficient heat transfer. Heat Transfer Salt with the increased use of high-temperature operations, the chemical and petroleum process industries need an economical, efficient, heat transfer medium
Code:
RXSOL-68-1436-025
Other Equivalent Brand

Quadtherm Heat Transfer Salt

Short Description:
Salt inhibited with the corrosion inhibitor resulting corrosion protection, as well as efficient heat transfer.
Generic Name:
Salt to avoid contact of direct-fire heating
Active Matter:
94
Molten Salt
Application:
Heat Transfer Salt kept in between steam and direct-fire heating.  Heat Transfer salt has low melting point  to create a molten salt bath also have high heat transfer rate and its proprietory blend o [+] Read More...
Using Procedure:
Heat Transfer Salt with the increased use of high-temperature operations, the chemical and petroleum process industries need an economical, efficient, heat transfer medium that is between steam and direct-f [+] Read More...
Note:
Now a days Uses of Molten Salts as a Heat Transfer Fluid and Thermal-Storage Medium is common. One of the most commonly used molten salts is a eutectic blend of sodium nitrate and potassium nitrate.  [+] Read More...
Technical Specifications:

 

Main Ingredients   : Salt Mixture with Corrosion Inhibitor
Inhibitors and
water
 
6
Inhibitors
: 6 %
Colour Bright : Yellow
Nitrite Content : 7.5 to 8.5%
Chloride Content  0.10% Max.
pH of solution : 9.5 - 10.5
Odour            : PRACTICALLY ODOURLESS
Solubility in water        : SOLUBLE
Melting Point       : Max 150 - 155 °C
Working Temp Range : 155 – 540 Deg.C
Density @ 20 Deg.C : 1160 Kg/m3
Reverse Alkalinity         : Minimm 15.0 ml
Vapour pressure    : .07 mbar at 20oC
Hear Transfer Salt TR : 155
Skin absorption/irritation       : YES
TLV       Country     :  
Pollution category    1994       : III
 
Remarks:

Why use Heat Transfer molten salts?

Heat Transfer Salt extend the upper range of the temperature limits in which a liquid heat transfer media can be used.

The molten salts most commonly used in heat transfer applications are the nitrate salts due to their low melting point, high operating temperature, thermophysical properties, low toxicity, low vapor pressure and corrosion performance.
 
The most common nitrate molten salts generally are a eutectic blend of sodium nitrate and potassium nitrate. Individual salts can be used, but by combining the two different salts together, the melting point is reduced. This allows for lower minimum operating temperatures and thus reduces the chance of freezeup. Sodium nitrate has a melting point of 584°F (307°C), and potassium nitrate has a melting point of 631°F (333°C). By mixing the two together, however, you can create a salt blend with a melting point of 431°F (222°C). This significantly expands the operational flexibility of the salt used in high temperature applications.
Temperature Range of Heat Transfer Salt?
 
Molten Salt  ( The sodium nitrate/potassium nitrate salt ) Can Operate  generally is used from 545 to 1049°F (285 to 565°C)
 
Benefit of Heat Transfer Salt Generally, nitrate salts provide a balance of wide operating range, thermal stability, corrosion performance and cost.
 
 
Advantage of the nitrate salts is corrosion performance . Nitrate salts are compatible with stainless steels up to 1049°F (565°C) and even carbon steel if the operating temperature is kept below 752°F (400°C). This makes them advantageous to use with common materials of construction to keep costs low. It is not advised to use yellow metals such as copper or brass with molten salts because they are not as compatible as steel at higher temperatures.
Heat Transfer Salt Molten salts are also used in applications of solar power plants (CSP), where the salt can store heat obtained from sunlight for long periods of time. Some of these CSP systems flow the salt directly through the receiver tubing, where sunlight hits a parabolic mirror and concentrates the sunlight to a tube in which the salt flows. 
 
Other systems may use molten salts for preheating natural gas lines or keeping reactors hot by using the molten salt in the jacket around a tank. Salts also have relatively high latent heat capacity — similar to many of the phase-change waxes that are used today — and are sometimes used in phase-change applications. When salts melt, they absorb large amounts of heat, and when they freeze, they release large amounts of heat. By utilizing this phenomenon, it is possible to create advanced thermal storage or temperature-regulating systems, depending on the process.

Molten Salt manufacturer and supplier in Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Barka - Oman, Muscat, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Oman Muscat Barka, Canada, Nairobi Kenya, Uganda Africa, Bahrain

Molten salt is salt that is solid at standard temperature and pressure (STP) but enters the liquid phase due to elevated temperature. A salt that is normally liquid even at STP is usually called a room temperature ionic liquid, although technically molten salts are a class of ionic liquids.
 
Molten salts have a variety of uses. Molten chloride salt mixtures are commonly used as baths for various alloy heat treatments, such as annealing and martempering of steel. Cyanide and chloride salt mixtures are used for surface modification of alloys such as carburizing and nitrocarburizing of steel.
 
Cryolite (a fluoride salt) is used as a solvent for aluminium oxide in the production of aluminium in the Hall-Héroult process. Fluoride, chloride, and hydroxide salts can be used as solvents in pyroprocessing of nuclear fuel. Molten salts (fluoride, chloride, and nitrate) can also be used as heat transfer fluids as well as for thermal storage. This thermal storage is commonly used in molten salt power plants.
 
Molten salts, sometimes referred to as salt melts, are a family of products used for a wide range of applications like high-temperature process heating, heat treating and annealing of steel, and thermal storage in solar thermal power plants. These salts are composed of fluoride, chloride, and nitrate salts.
 
Molten salt By Product Type
 
Binary Molten Salt
Ternary Molten Salt
 
Molten salt Applications Type
 
Thermal Energy Storage
Chemical Industry
Metallurgical Production
 
 
 
we provide a wide variety of effects on which many other industry sectors rely. Some of the categories of speciality chemicals are adhesives, agrichemicals, cleaning materials, colors, cosmetic additives, construction chemicals, elastomers, flavors, food additives, fragrances, industrial gases, lubricants, paints, polymers, surfactants, and textile auxiliaries. Other industrial sectors such as automotive, aerospace, food, cosmetics, agriculture, manufacturing, and textiles are highly dependent on such products.
Molten Salt
:
Packing Size:
50.00 Kg.PWD
Available Packing Size:
25, 50 Kg. Bag and JAR packing
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Cold Flow Improver Middle Distillates Diesel

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-70-7017-025
Other Equivalent Brand

Diesel Antigel Fuel Lubricator

Short Description:
Highly effective flow improver Stop Gelling, Increase Lubricity PREVENTS DEPOSITIONfor heating oil, diesel and super diesel.
Generic Name:
Diesel Antigel Fuel Lubricator
Active Matter:
99-99.5
Cold Flow Improver Middle Distillates Diesel
Application:
Suitable for all diesel engines, Tank  and facility use. Also for all heating oil tanks. Helps to prevent cold start and cold running problems in low temperature climate circumstances by anti-gel per [+] Read More...
Using Procedure:
Operating instructions In diesel : Add to fuel tank before it reaches the 0 °C limit. With heating oil: Add to tank before it reaches the 0 °C limit. Dose :: RXSOL CFID  should be dosed to the fuel t [+] Read More...
Note:
Features Cold flow improver and pour point depressant Delays the onset of paraffin crystallization to improve cold flow properties Benefits Enables you to handle the fuel at lower temperat [+] Read More...
Technical Specifications:

 

Form         Liquid
Colour Clear to Light Yellow
Odour Hydrocarbon-like.
Specific Gravity20 °C 0.90
pH Not Applicable
Pour Point -6°С
Flush Point > 60°С
Solubility Soluble in Hydrocarbon and Aromatic Solvents

 

Cold Flow Improver Middle Distillates Diesel manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Cold Flow Improver Middle Distillates Diesel at a competitive price from us. We have ready stock of Cold Flow Improver Middle Distillates Diesel in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Cold Flow Improver Middle Distillates Diesel
:
Packing Size:
25.00 Ltr.
Available Packing Size:
Cold Flow Improver Middle Distillates Diesel helps Stop Gelling, Increase Lubricity PREVENTS DEPOSITION.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Rifle Bore Cleaner RXSOL

Product Description | Product Application | Product Notes| Product DOSE
RXSOL Rifle Bore Cleaner is a  highly penetrating, mobile liquid and is intended for field application to satisfy the complete need of cleaning of military weapons. Facilitates the effective removal [+] Read More...
Code:
RXSOL-68-6826-025
Other Equivalent Brand

Rifle Bore Cleaner, MIL-C-372 Cleaning Compound, Solvent For Bore of Weapons, Alkaline Powder for Gun Barrel Cleaning 5 litre

Short Description:
A highly penetrating, mobile liquid and is intended for field application to satisfy the complete need of cleaning of military weapons.
Active Matter:
98 - 99%
Rifle Bore Cleaner RXSOL
Application:
Using Procedure:
Saturate patch with bore solvent and push through bore from breech and out muzzle. Repeat with clean saturated patch. Follow with dry patch. Repeat wet-dry patch process until bore is clean. For stubborn d [+] Read More...
Note:
Benefit : Safe to use on metals. Will not cause rust, oxidation, staining, or galvanic corrosion. Easy to use Note : Due to the solvent systems employed in Rifle Bore Cleaner  type formulat [+] Read More...
Technical Specifications:

 

Appearance : Amber liquid
Odor                                            : Mild
Odor Threshold : Not available

pH

: Not Applicable
Flash Point : 65°C
Boiling Point : >150° C
Density : 0.861 g/cm3
Auto Ignition Temperature : 254° C
Refractive Index : 1.455
Water Solubility : Negligible
Remarks:




Rifle Bore Cleaner RXSOL manufacturer and supplier in Fujairah, Muscat, Nairobi, Mumbai, Gandhidham, Visakhapatnam, Kolkata, Chennai, Dubai, Ajman, Jerf, Abudhabi, Sharjah, Barka Sohar, Oman, Gulf Middel East Canada


Rifle Bore Cleaner RXSOL
:
Packing Size:
5.00 Ltr.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Silicon Manganese

Product Description | Product Application | Product Notes| Product DOSE
In electric submerged-arc furnaces Silico-manganese is chemically manufactured by silico-thermic reduction, using manganese ores and/or slags from the production of ferro-manganese. Silicon Manganese i [+] Read More...
Code:
RXSOL-68-1912-050
Other Equivalent Brand

Silico Manganese

Short Description:
In electric submerged-arc furnaces Silico-manganese is chemically manufactured by silico-thermic reduction, using manganese ores and/or slags from the production of ferro-manganese.
Generic Name:
Ferro Alloy
Did you Know?

 Silicon Manganese increasing High strength in steel products ?

Silicon Manganese
Application:
Silicon Manganese Precise content of manganese & silicon which helpful to Sturdiness, High strength. Presence of Silicon Manganese in steel Iron increasing deoxidising property in the Iron. As Silicon Mamganes have Excellent chemical properties as Deoxidizer.
Using Procedure:
RXSOL Silicon Manganese Configurationis Low carbon, low boron, low Ti, Low P, High mn.
Note:
Difference between ferro manganese and silico manganese?   Ferro manganese is a  alloy of manganese containing manganese and iron with some amount of carbon, While silico manganese contains silicon and manganese along with some amount of carbon.
Technical Specifications:

Silico Manganese manufacturer and exporter from India.

Silicon Manganese
:
Packing Size:
50.00 Kg
Available Packing Size:
RXSOL brand Silicon Manganese Configurations Low carbon, low boron, low Ti, Low P, High Mn. available in 25 kg and 50 Kg Bag.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Sulfamic Acid Inhibited

Product Description | Product Application | Product Notes| Product DOSE
Sulfamic Acid Inhibited - Sulfamic Descalant
Code:
RXSOL-43-1304-125
Other Equivalent Brand

Sulfamic Acid with Corrosion Inhibitor, Accepta 2316, Inhibited Sulphamic Acid

Short Description:
Sulphamic acid can be used for removing scales obtained from water in heating and cooling systems e.g. boilers, condensers, heat exchangers, jackets and coils
Generic Name:
Inhibited Sulphamic Acid
Active Matter:
95-96
IMPA Code:
550970, 550971
Sulfamic Acid Inhibited
Application:
White crystalline soild, non volatile, non volatile, non hydroscopic. Soluble in water and odorless. Toxic by ingestion. Uses: Metal and ceramic cleaning, amine sulfamates, ph control, hard water s [+] Read More...
Using Procedure:
DIRECTION OF USAGE •    Machines should be rinsed with water to remove loose flakes & sludge's before use •    Powder should be added to warm water for an ideal solution •    Sample should be properly [+] Read More...
Note:
Packing of Sulphamic acid ( NH2SO3H or H3NO3S ) Sulphamic Acid is available in H.D.P.E. bags of net 25 and 50 Kgs. Material. Sample packets of 100-200 gms. are supplied on request.  Advantages of using [+] Read More...
Technical Specifications:

Sulphamic Acid Specifications :    

Sulphamic Acid Based Descalants
Our high quality range of Sulfamic Acid Descalant is non hazardous & non flammable, and does not give off unbearable fumes. It’s perfect for removing scales from cooling towers, coils, heat exchangers, condensers and heating & cooling systems. Sulfamic Acid Descalant increases the efficiency of working of a plant and equipment on cooling and cleaning surfaces by removing industrial scale.

Sulfamic ACID various grade :::

A) Export Quality 

CAS Number: 5329-14-6

IUPAC: sulfamic acid
Common Chemical Name Sulfamic Acid
Molecular Formula NH2SO3H
Molecular Weight 97.09
Purity of Sulfamic 98.1%(min.)
Moisture 0.1% max
Physical Appearance White crystaline powder
Matter Insoluble in water 0.05
Sulphate as So4 0.1
Lead as Pb 0.0001
Iron as Fe 0.001
Ammonical Nitrogen as NH4 HSO4 0.15

 

Melting point
205 Deg.C
Decomposition Temperature
209 Deg.C
Specific Gravity
2.126
Bulk Density (loose)
1.0 - 1.2
Bulk Density (packed)
1.0 - 1.6
Dissociation constant
0.101

B)  sulphamic acid Technical grade
Purity- 99 % w/t min
sulphate- 0.05 % w/t/ max.
Iron[fe] - 0.001 % w/t/ max.
Lead [pb] - 0.001 % w/t/ max.
Apperiance - white crystalline powder.
Material insoluble in water - 0.1 % w/t/ max.
Ammonical nitrogen- 0.15 % w/t/ max.
 
 
C) Sulphamic acid Descalant grade
Purity- 97 % min.
Moisture- 1 % min.
Sulphate As so4 - 0.02 % max.
Lead as [pb] - 0.001 % max.
Iron as [fe] - 0.001 % max.
Ammonical  nitrogen - 0.015 % max.
Inhibitor dose - 1.5 % min.
Inhibitor efficiency - 98 % min.
Remarks:

Efficiency :Rapid Softening, disintegration and dissolving of scales.

Economy

By reducing down-time, productivity is increased. by protecting metal and by uniform leaning of the surface equipment life is prolonged and performance made superior. The above information is adequate for commonly encountered problems of descaling.

Handling & Storage

Safety

•    No Fumes Avoid contact with skin or eyes. Wear Cup-type, rubber or soft plastic-framed goggles, protective clothing, and rubber gloves must be worn when handling.

•    Keep in a tightly closed container. Protect from physical damage.

•    Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities.

•    Containers containing this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

•    Ensure as low exposure as possible. Local exhaust ventilation is generally preferred as it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.

Application and Dosage
It Is A Non-Inflammable And Biodegradable Chemical Compound And Does Not Give off Obnoxious Fumes. The Method of Using Samrat Industries Inhibited Sulfamic Acid Is Very Simple And Basic.
 

 

Prepare A Solution of 5-10% W/W of RXSOL Inhibited Sulfamic Acid In Preheated Water (preferably) At 70-80oc. The Descalant Solution Should Be Prepared About 20% In Excess of The System Hold Up Volume. Re-Circulate The Solution Using An Acid Compatible Pump. After Descaling Is Completed, Flush Out The Solution And Rinse Once With Plain Water. Neutralize The System With 2% W/W RXSOL RXSOL-20-2004-025 In Water And Recirculate For An Hour. Flush Out The Solution And Return System To Normal Service.

 

Synonyms of Sulphamic Acid: SULFAMIC ACID, Sulfamidic acid, Amidosulfonic acid, Jumbo, Sulphamic acid, Amidosulfuric acid, Aminosulfonic acid, Imidosulfonic acid, Sulfaminic acid, Aminosulfuric acid, Sulphamidic acid, Sulfamidsaeure, sulfuramidic acid, Amidoschwefelsaeure, Kyselina sulfaminova 

Manufacturing, supplying and exporting of Sulphamic Acid. Our company Established in the year 1995 and we are involved in manufacturing supplying and exporting of various industries-based products.

#InhibitedSULFAMICacid_supplier
#sulfamicACIDinhibited_manufacturer
#Sulfamic_MuscatOMAN
#sulfamic_DUBAIuae

INHIBITED SULFAMIC ACID
Sulfamic Acid Combined With Corrosion Inhibitor And Wetting Agent, To Provide Corrosion Protection To Metal During Descaling And Giving Optimum Cleaning of Water Side of Heat Exchangers And Boilers.
 
It Also Aids In Removal of Loose Corrosion Products, Organic Foulants, Dirt, Clay And Silt Deposits. It Is Used For Descaling of High And Low Pressure Boilers, Heat Exchangers Etc., And Is Safe For Aluminum, Stainless Steel, Carbon Steel, Mild Steel, Cast Iron, Brass, Admiralty Metal, Titanium, Copper And Copper Alloys, Pvc Plastic, Rubber Or Leather When Used As Directed.

Trader, Manufacturer, Supplier and  exporter of Inhibited Sulphamic Acid.

Sulfamic Acid manufacture, exporter and supplier in India UAE Middle East, Oman, Nairobi Kenya. Sulfamic Acid supplier in Mumbai, Gandhidham, Kolkata, Chennai, Visakhapatnam, Fujairah, Ajman, Abudhabi, Dubai, Sharjah, Barka Muscat Ruwi, Salalah, sohar, Oman, Africa, Canada

Key Features and Benefits
Effective Removal of Hard Scale Deposits From Heat Exchanger
Eventually More Economical Than Raw Sulfamic Acid Because About 5-6% of The Raw Acid Strength Is Used Up In Corroding The Metallurgy And Causes Metal Loss
Corrosion Inhibited And Safe For System Metal And Components
Excellent Wetting Characteristics To Aid In Removal of Organic And Greasy Foulants
Biodegradable Product
Easy To Handle
 
 
Handling Measures and Precautions
Proper Human Safety Products Such As Splash Goggles, Lab Coat, Vapor Respirator, Gloves And Boots Should Be Worn While Handling And Applying Chemicals. Splashes On Skin Should Be Washed off With Water Immediately. In Case of Splashing Into The Eyes, Flush It With Fresh Water And Obtain Medical Attention. Should Not Be Injected. Please Refer Msds For More Details.
 
Storage
This Product Should Be Stored In Original Containers In Cool And Dry Place, Away From Sources of Heat, Flame And Direct Sunlight. Please Refer Technical Data Sheet, Label And Msds For More Details And Shelf Life.
 
Packing
RXSOL Inhibited Sulfamic Acid Is Available In 25, 50kgs PACK.
Sulfamic Acid Inhibited
:
Packing Size:
25.00 Kg.PWD
Available Packing Size:
500 Grm / 1 / 5 / 10 / 20 / 35 kg and 50 Kg. Special Factory sale price available .
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Sodium Benzoate Food Grade

Product Description | Product Application | Product Notes| Product DOSE
Sodium Benzoate Food Grade supplier and Exporter for food and Medicinal Industries. We have TWO grades of Sodium Benzoate : Sodium Benzoate Food Grade RXSOL-19-1908-050 for used in Solid food contain only Sodium Benzoate Food Grade RXSOL-95-1908-050 for used in Beverages contain only
Code:
RXSOL-95-1908-050
Other Equivalent Brand

Sodium Benzoate Food Grade Suitable for Beverage liquid contains

Short Description:
Sodium Benzoate Food Grade Suitable for Beverage liquid contains for SOLID contains use our other grade RXSOL-19-1908-050
Generic Name:
Beverage Preservative
Sodium Benzoate Food Grade
Application:
Most commonly Sodium Benzoate Food Grade used as  antifungal food preservative. Sodium Benzoate Food Grade prevent the growth of bacteria, yeast, or other nasty microorganisms that could spoil food. [+] Read More...
Using Procedure:
Sodium Benzoate Food Grade prohibit growth of fungi and preserves food due to anti-fungal properties. Sodium Benzoate Food Grade can be used in pickles, sauces, jams and fruit juices. Foods that contain vinegar, such as salad dressings etc.
Note:
Sodium Benzoate Food Grade Enhances flavour / taste of Acidic Food, But always remeber never use Sodium Benzoate Food Grade with Vitamin C( Ascorbic Acid )  as it forms benzene which is a carcinogen. So [+] Read More...
Technical Specifications:

Sodium Benzoate Food Grade aqueous solution is alkaline in nature with pH value 8 approximate.  Sodium Benzoate Food Grade is combined with water, benzoic acid is produced. Benzoic acid is the active form of the preservative—the form that protects foods. Benzoic acid is also found naturally in some fruits, such as cranberries, plums, and apples.

Remarks:

Medicinal application of Sodium Benzoate to control Ammonia in URINE ?

Liver diseas problem generate excess of Ammonia in waste product and release ammonia via urine.  Uses of sodium benzoate may help treat such things. The chemical reduces high blood levels of the waste product ammonia, such as in people with liver disease or inherited urea cycle disorders — conditions that limit the excretion of ammonia via urine.

Sodium Benzoate, NF/FCC is widely used in carbonated and still beverages, syrups, cider, salted margarine, olives, sauces, relishes, jellies, jams, preserves, pastry and pie fillings, low fat salad dressing, fruit salads, prepared salads, and in storage of vegetables. Some generalized applications are described in the following examples. Keep in mind that both federal and state regulations may apply to specific applications. These regulations should be reviewed and verified as applicable or non-applicable for each specific use application.
 
BEVERAGES:
Sodium benzoate is the standard preservative used in carbonated beverages. Typically 0.03 to 0.08% is used for the finished products. Sodium benzoate is often used to preserve the flavor syrup prior to the addition of the beverage acidulant. Non-carbonated beverages normally require somewhat higher concentrations of 0.05 to 0.1% sodium benzoate in the finished products.

CIDER:
The shelf life of non-pasteurized cider can be greatly extended by using sodium benzoate and it should be added as soon as the juice is pressed. A slight tang, which many tasters apparently prefer, may be imparted to the cider by concentrations of sodium benzoate as low as 0.04%.
 
MARGARINE:
Margarine is regulated by standards of identity described in 21 CFR 166.110. Sodium benzoate is allowed as a preservative up to 0.1%. Special attention to the preservation may be required for low salt or salt free margarine, as salt may exhibit a synergistic effect with sodium benzoate.

SYRUPS:
Concentrated sugar solutions are somewhat resistant to fermentation under ideal conditions but may be subject to quality deterioration in non-ideal circumstances. Sodium benzoate may be used to inhibit microbial growth in these syrups at levels of about 0.1% at pH values below 4.5. In chocolate syrups and other fountain syrups with pH values above 4.5, sodium benzoate may be used in conjunction with other preservatives that are more effective in that pH range.
FRUITS, FRUIT JUICES, AND FRUIT SALADS: Typically sodium benzoate will be used at levels of 0.05 to 0.1% to preserve these products. Maraschino cherries are preserved with 0.05 to 0.1% sodium benzoate. The shelf life of chilled citrus salads is materially improved by the use of 0.03 to 0.08% sodium benzoate in the cover syrup.

ORANGE JUICE PRODUCTS:
Orange juice products are regulated by standards of identity of “Orange Juice with Preservative” described in 21 CFR §146.152 and "Concentrated Orange Juice with Preservative" 

FRUIT BUTTERS, JELLIES, PRESERVES, AND RELATED PROUDCTS: Fruit butters, jellies, preserves, and related products are regulated. According to that regulatory description, GRAS preservatives such as sodium benzoate are permitted as optional ingredients in a concentration reasonably required for preservation. Artificially sweetened fruit jelly is and artificially sweetened fruit preserves and jams to contain sodium benzoate up to a level not to exceed 0.1%, by weight, of the finished food.

SALAD DRESSINGS:
Non standardized salad dressings which have a relatively low fat content may be preserved by the use of sodium benzoate at a use level of 0.1%, if the product is below a pH of 4.5.

PREPARED SALADS:
Prepared salads are generally kept under refrigeration but additional protection against mold and yeast growth may be gained by using 0.1% sodium benzoate. The pH of these products should be below 4.5 for the preservative to be effective. The preservative should be added with the salad dressing or with the gelatin solution.

NON-STANDARDIZED SAUCES AND CONDIMENTS:
Many non-standardized sauces and condiments that have a pH range below 4.5 may be effectively preserved with sodium benzoate at 0.05 to 0.1%.PICKLES AND PICKLE PRODUCTS: Yeast and mold contamination and scum formation in pickles and pickle products may be controlled with up to 0.1% sodium benzoate. The sodium benzoate may be added with the sweet juice to be used on the pickles, which may make up about one-third of the total bulk content. Consequently, 0.3% sodium benzoate could be added to the sweet juice to attain not more than 0.1% sodium benzoate in the entire finished product.

PHARMACEUTICAL, TOILETRY, AND COSMETICS APPLICATIONS:
Sodium benzoate, NF/FCC is used extensively in pharmaceutical preparations, toiletries, and cosmetics. Sodium benzoate is a well-known and widely used preservative for pharmaceutical products such as syrups, flavored vehicles, and multiple dose containers for liquid preparations. The pH is an important factor and use levels may vary.In the manufacture of compressed tablets that will give clear solutions, a level of 2 to 4% sodium benzoate powder in the granulation has been described as an efficient lubricant and provides rapid disintegration times. Sodium benzoate has a solubilizing effect of certain drugs, which is useful, for instance, in caffeine preparations or certain anesthetic compositions. Sodium benzoate is also used as a diagnostic acid for liver function.Sodium benzoate is a safe, economical preservative in certain toiletries preparations such as creams, lotions, gum solutions, and toothpaste. The advantages of sodium benzoate in these applications are that it is colorless, odorless, readily soluble, and generally is compatible other ingredients. Sodium benzoate has been generally reported to be used at concentrations below 3%. The preservative is also most efficient at lower pH values. The inhibitory level of sodium benzoate in emulsions increases with oil content. Sodium benzoate has found antimicrobial applications in mouthwashes, dermatological creams and ointments, and deodorants.

OTHER USES:
Sodium benzoate has been used as a preservative for various juice extracts during processing steps and in the finished product. One such application is in the use of sodium benzoate as a preservative for yucca juice extract, which is a natural surfactant used in dairy waste control.
Many other uses of sodium benzoate, NF/FCC are possible in these industries whenever there is an application for a preservative and the parameters of the media are suitable or may be made suitable for sodium benzoate.

INDUSTRIAL APPLICATIONS:
CORROSION INHIBITION:
Sodium benzoate has found considerable application as a corrosion inhibitor in low concentrations. Corrosion inhibition has been reported for steel, zinc, copper, copper alloys, soldered joints, aluminum, and aluminum alloys. As a liquid phase inhibitor, low concentrations of sodium benzoate have been reportedly been used for corrosion control at a pH as low as 5.5, but the most effective inhibition appears to be in the pH range of 6 to 12. The effectiveness of the corrosion inhibition has been reported to be positively affected by small concentrations of Sodium Nitrite and negatively affected by concentrations as low as 0.1% of Sodium Chloride and / or Sodium Sulfate.
A critical minimum pH for inhibition with respect to the sodium benzoate concentration has also been indicated.


It has been suggested that sodium benzoate reduces fouling by reducing the tendency of rust and scale to dislodge from corroded surfaces. Sodium benzoate does not cause foaming or frothing when-used as a corrosion inhibitor in these applications. Sodium benzoate also presents no toxicity problems when used as a corrosion inhibitor, which could be an asset in applications sensitive to odor and toxicity.
The use of sodium benzoate impregnated in paper wrappers has also been used to inhibit the corrosion of tin, steel, chrome plated, and galvanized surfaces even in humid environments. Total contact of the metal surfaces by the wrapping medium is required. In some instances, wrapper protection has been unsuitable and the metal parts have been reported to be inhibited by dipping in solutions of Sodium benzoate. Sodium benzoate has also proved useful in protecting the metal containers for such products as agricultural chemical solutions, household products, waxes, polishes, and aerosol products. Corrosion around labels on tins has been prevented by Sodium benzoate in the adhesive emulsion. Can rusting in neutral to slightly acidic emulsion paints has been prevented by use of sodium benzoate. Sodium benzoate undoubtedly has additional applications as a corrosion inhibitor and has been more extensively evaluated outside the United States where it is more frequently used in that application, especially in automotive engine cooling service.
 
OTHER INDUSTRIAL USES:
Several other industrial uses for sodium benzoate have been discovered and they are quite valuable. Some of these uses include chemical intermediates, catalysts, and as nucleating agents for polyolefin manufacture.


Sodium Benzoate Food Grade exporter and supplier in Muscat, Sharjah, Fujairah, Dubai, Mumbai, Kenya, Nairobi, Mombasa, Uganda, Canada, Kolkata, Gandhidham, Chennai, Visakhapatnam.
 

Sodium Benzoate Food Grade manufacturer supplier and exporter in India, UAE- Dubai Sharjah Abu Dhabi Fujairah. Sodium Benzoate Food Grade manufacturer suplier and exporter in Mumbai. Sodium Benzoate Food Grade manufacturer supplier and exporter in Muscat Barka Oman, Yemen, Saudi Arabia. Sodium Benzoate Food Grade manufacturer supplier and exporter in Kenya, Nairobi, Mombasa, Uganda, Canada

The United States Food and Drug Administration has studied sodium benzoate extensively and found that it is safe when consumed in amounts found in normal diets.

Sodium Benzoate is primarily used as FDS GARS additive and preservative in food and beverage application to reduce or inhibit activity of microorganisms. lt is also used in a wide range of other application such as Pharmaceuticals, Cosmetics, Toiletries, Adhesives, Paste, Polishes, Cleaners, Emulsions, Electroplating chemicals, confectionary, coolants.
 
CAS NO.: 532-32-7
Molecular Formula: CzHsOzNa
Molecular Weight: 144
 
Appearance: White Powder
Assay: >99.0%
Moisture: >1.5%
Soiubility (in Water): Easily soluble
Storage Store Cool and Dry : Room Temperature
 
 
Before using this product, Vou must become completely familiar wlth the safety and hazard information contained in the material safety data sheet. RX MARINE INTERNATIONAL(the seller) present this data sheet information, to the best of our knowledge, to be true and accurate without warranty and disclaims any liability arislng from its use and/or misuse. Seller recommends use of the informatlon to make your own determination of its suitability and completeness for your own use in commercial processes which do not violate third-party patent right or any laws or regulation. The seller makes no warranties, express or implied, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose except as expressly stated in the seller's conditions of sale or sales acknowledgement form.
Sodium Benzoate Food Grade
:
Packing Size:
25.00 Kg.PWD
Available Packing Size:
Sodium Benzoate Food Grade available in 5, 25, 50 Kgs PACKS
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Tri Sodium Phosphate Anhydrous TSP

Product Description | Product Application | Product Notes| Product DOSE
Tri-sodium phosphate TSP Anhydrous is the inorganic compound . It is a white, granular or crystalline solid, highly soluble in water producing an alkaline solution. Tri-sodium phosphate is manufactured [+] Read More...
Code:
RXSOL-15-1522-020
Other Equivalent Brand

TRISODIUM PHOSPHATE TSP Anhydrous 25 kg, Trisodium orthophosphate , Sodium Phosphate Tribasic Anhydrous, Sodium Orthophosphate.

Short Description:
TRI SODIUM PHOSPHATE TSP Powder ANHYDROUS
Generic Name:
Anhydrous TSP
Did you Know?

TSP is also used in manufacturing paper, in softening water and in tanning leather?

Active Matter:
42
Tri Sodium Phosphate Anhydrous TSP
Application:
Used in detergent mixtures, soaps, removing boiler scales, textiles processing, clarifing sugar, paper, water softner, leather tanning, laundering, paint remover,emulsifing fats oils, dairy food proc [+] Read More...
Using Procedure:
Formulation: H3PO4 + 3NaOH = Na3PO4 + 3H2O 2H3PO4 + 3Na2CO3 = 2Na3PO4 + 3CO2 + 3H2O   Grades We Manufacture : • Tri-sodium Phosphate Anhydrous Industrial Grade • Tri-sodium Phosphate Anhydrous Pure Grade
Note:
SYNONYMS :- Trisodium orthophosphate , Sodium phosphate tribasic , Sodium orthophosphate.   Cas No :- 7758-16-9 Chemical Formula :- Na3po4 Molecular Weight :- 163.94 Physical Form :- White Free F [+] Read More...
Technical Specifications:

 

Property Description

Specification

Purity, %

99.1 min

Sulphate, %

0.5 max

Insoluble in water, %

0.05 max

P2O5 %

41 min

CO3 %

0.40 max

NaOH %

2.87 max

Arsenic, %

0.005 max

Iron %

0.01 max

Chloride,%

0.7 max

Fluoride, %

0.003 max

Methyl Orange

16.5-19.0

Remarks:
Cas No :- 7758-16-9
Chemical Formula :- Na3po4

Tri Sodium Phosphate Anhydrous TSP manufacturer, exporter and supplier in India, UAE - Middle East, Oman, Nairobi Kenya Africa. Tri Sodium Phosphate Anhydrous TSP stockist and supplier in Mumbai, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, Jerf Ajman, UAE GULF, Gandhidham, Kolkata, Chennai, Visakhapatnam, Surat Gujrat, Sohar Barka Oman, Sudan, Yemen

Tri Sodium Phosphate Anhydrous TSP
:
Packing Size:
50.00 Kg.PWD
Available Packing Size:
HDPE bag with LDPE liner in 20 kg, 25kg, 40kg and 50 kg
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : mail@rxmarine.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarine@gmail.com ( This mail is for supplier only )

 

 

Syndicate content