RIGS Oil Field-34

STRUCTURE  :-

          RXSOL-10-1102-210 : Molecule have a long chain non polar
                                               Hydrocarbon, whose structure can be Studied as follows:-
                                               Head :    It is water soluble &  ‘-‘Vely charged.
                                               Tail   :    It is oil soluble.
 

Cleansing Action Of RXSOL-10-1102-210 :-When RXSOL-10-1102-210  water is poured over the skin or  dirty  garments(Cloth )  the  hydrocarbon Tail  of the SYNDET molecules peg in to it, while the (–ve) HEAD is held in water.The dirt or grease layer is then disloged from the skin by rubbing or from garment by tumbling  and stirring. Each grease globule thus separated in PIN – CUSHIONED by hydrocarbon  TAILS with (-ve) HEADS out wards in water. The (-ve) HEAD globules keep apart by mutual repulsions & are said to have emulsified.The emulsified grease globules bearing dirt can be readly washed with water.


Characteristics:-( Why RXSOL-10-1102-210, is better than ordinary degreaser ?)
1) The “RXSOL-10-1102-210” are superior to general emulsifier or degreaser because  they donot form  insoluble salts Ca+²,Mg+², & Fe+³,ions as soaps do.
For e.g :- 2RCOO¯Na+  +Mgso4  Ù(RCOO)2 Mg+²  + Na2So4  Soaps                          
Insoluble 2R                               So3¯Na+  + MgSo4 [ R                         So3¯]2Mg+² +Na2So4 RXSOL-10-1102-210 SOLUBLE Hence ORGANIC-SYNDETS ,can be used in either Soft Water or Hard   Water,   While ordinary soaps are precipitated in Hard Water and go waste.
2)  RXSOL-10-1102-210, have a long non-polar hydrocarbon chain and a highly polar group at the end of the molecule. Thus they have CLEANING POWER , as better than ORDINARY SOAP.   
3) Ordinary Soaps were not readily BIODEGRADABLE, In other words, they were not broken down by BACTERIA  in the  SEWAGE TREATMENT PLANTS. They     caused  water POLLUTION  while RXSOL-10-1102-210, are  BIODEGRADABLE , so there is no question of water pollution.

The Importance of RXSOL-10-1102-210 by High-Pressure Cleaning The job of high pressure cleaning can be done easier & quicker by simply using RXSOL-10-1102-210 in correct dosa -ges. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1 : Spraying the RXSOL-10-1102-210 over the area to be cleaned.
Step 2 : Washing down the area using a high-pressure water jet After the RXSOL-10-1102-210 has been sprayed on the surface and before

The wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, theRXSOL-10-1102-210 thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of RXSOL-10-1102-210 substantially reduces the time required for the Cle -aning operation, as well as preventing dirt from reforming on the surface. The use of RXSOL-10-1102-210 in correct dosages is half the job done. 3 Pieces of Good Advice Apply RXSOL-10-1102-210 on dry surface where possible A dry surface will absorb far better than a wet surface.When applying RXSOL-10-1102-210 on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RXSOL-10-1102-210 may produce "channels" down the surface, thereby running too fast off the surface. During high pressure cleaning:It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RXSOL-10-1102-210 will  give  the  best  effect.

Degreaser Bio Degradable HD RXSOL-10-1102-210 Exporter, manufacturer and supplier in India UAE Iraq Oman Mumbai, Chennai, Visakhaptnam, Kolkata, Ajman, Dubai, Sharjah, Ajman, Abudhabi, Fujairah, Barka Muscat Oman, Basrah Iraq, Canada 

 RIG WASH manufacturer and supplier in India - UAE - Oman - Nairobi - Sudan - Yemen

Avoid contact with eye and wounded area. And keep contianer tightly closed. RXSOL brand Rig Wash Liquid Concentrate produced and manufacture in our Mumabi and Kolkata Plant. And we are very popular in Middle East and india as a Rig Wash Liquid Concentrate 210 Ltr supplier for Mumbai, JNPT, Navi Mumbai, Surat, Gandhidham, Ennore, Chennai, Vizag, Gangavaram, manglore, Goa, Fujairah, Abudhabi, Dubai, Sharjah. We are also classified as Rig Wash Liquid Concentrate exporter.

Rig wash developed concentrated for Industrial cleaning operations.

Rig Wash for drilling platforms cleaning water-based caustic free alkaline detergent composite liquid. RIG WASH effectively cleans greasy oily surfaces from operational area of oil refineries, Ship vessels, Rigs Platform and also helpful to clean other equipment in the oil and gas industry.

Rig wash Liquid Manufacturer and supplier in Iraq Kuwati, Dubai, Sharjah, Ajman, Abudhabi, Fujairah, Kakinada, Visakhpatnam, Andhra Pradesh, Tuticorin, Mumbai, Kandla Kolkata, Chennai, Ruwi Braka Sohar, Muscat Oman, Yemen, Sudan, Nairobi Kenya, Canada

#Rigwash_Iraq
#Rigwash_Dubai
#Rigwash_Muscat
#Rigwash_Kakinada
#Rigwash_Mumbai
 

Sea-cleaner Degreaser supplier in Mumbai, Kandla, Chennai, Vizag, Goa, Kolkata, Haldia, Paradip, Goa, Manglore. Sea clean available in various size of packing as per customer demand. Sea-cleaner product easily dissolves in water which is resulting non flammable degreaser for heavy industries as well as Sea-cleaner is most popular degreaser in Marine and Oil filed industries.

RXSOL-20-2002-025 HEAVY OIL CLEANER - SEA CLEANING product is an extremely effective  liquid blend of  concentrated emulsifier with penetrating agents, mild abrasives and wetting agents which makes this an excellent  liquid scouring cleansers for cleaning and degreasing of double bottom, deep tanks etc which is used for fuel oils It can also be used for   BOILERS, MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms  on deck.

Use Handgloves, Goggles and safety mask before using in Tank. Keep container tightly closed and away from direct heat, fire and sunlight.

#SeaCleaning_Chemical
#MarineChemical_SeaCLEANER
#seaTANKclean_SolventEMULSIFIER
#MarineChemicals

HEAVY SEA OIL CLEANER EMULSIFIER manufacturer and supplier in Navi Mumbai, Masjid Bunder Crawford Market Yellow Gate, Gandhidham, Kandla, Jamnagar Sikka, Hazira Surat, Kolkata, Haldia, Buz buj, Paradip, Ennore Chennai, Visakhapatnam Vizag, Gangavaram, Fujairah, Ajman, Abudhabi, Dubai, Sharajah, Muscat, Barka, Ruwi Sohar, Canada

HEAVY SEA OIL CLEANER EMULSIFIER is most popular emulsified solvent based product to clean. When the matter comes to clean oily residue, bilges contaminated tank HEAVY SEA OIL CLEANER EMULSIFIER is best option. On the other hand HEAVY SEA OIL CLEANER EMULSIFIER also suitable to emulsifying cleaning of oily based residue with Sea Water.

Alkaleen Tank Clean Safety manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Alkaleen Tank Clean Safety at a competitive price from us. We have ready stock of Alkaleen Tank Clean Safety in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Product Properties

Ship Chandlers of Mumbai, Kandla, Visakhapatnam, Chennai, Kolkata, Haldia, Fujairah, Dubai, Sharjah, Abudhabi, Muscat Sohar are well known to us to procure our TANK CLEANING and other Marine Chemicals.

Using-Procedure    

Spraying:–

This can be beneficial as part of the initial cleaning process after the carriage of Lube oils and Lube oil additives.  As soon as the tank in question has been checked empty by the attending surveyor, RXSOL-20-2001-210  should be sprayed over all surfaces which are safely reacheable.
 

Portable machines:–

After 45 minutes the butterworth machines should be operated for 3 x 20 minutes drops using warm 60o C, then the machines brought back to the top and a full hot wash 80 – 85 o C should be carried out for at least 6 hours.

Fixed machines:–

Wash ambient for 45 minutes followed by warm water for one cycle before increasing to hot (80oC) for 4 hours.

Injection:–

This can be carried out by injecting RXSOL-20-2001-210  into the butterworth system after the heater. A normal amount to use would be 100 – 150 liters during the initial washing cycle.  Water temperature should be 60o C during the injection period then brought up to 80 – 85 o C for the full washing period.

Re-circulation:–

Possibly the best result are achieved by re-circulating a solution of RXSOL-20-2001-210 after the initial rough washing of the tank.  A sufficient amount of fresh water to maintain good suction should be heated  to 60 o C and approximately 420 liters of RXSOL-20-2001-210  (2 drums) added for each 500 liters of fresh water.  The temperature of the mixture can be increased depending upon  the melting point if the product being cleaned.  The solution should be circulated for at least 4 hours and the butterworth machines  operated at maximum pressure in all areas of the tank  throughout this process.  If a number of tanks are to be circulated, then a substantial quantity of solution can be made so that transfers can be made without delay and any small amounts lost will not affect the operation.  Normally following transfer to another tank, 100 liters RXSOL-20-2001-210  is added for each 5000 liters of solution.  This is called “spiking”.
  

Following the re-circulation process, the tank must be hot butterworthed 80-85o C for at least 6 hours.
      *Use         a                 strainer                at               the                 pumpstack               when               circulating          any                        solution              RXSOL-20-2001-210 is recommended for local cleaning and degreasing and may be applied  by  brush,  hand  spray, immersion, soaking or any other conventional means. Apply concentrate RXSOL-20-2001-210 over  soiled  area  and wait for 20-30 minutes before rinsing off with water.
 

Soak Method:-

For heavy oil and soil Put parts to be cleaned into a bath of concentrate RXSOL-20-2001-210 and  for medium to light soiling use a solution of 10-30% RXSOL-20-2001-210 in water. Parts should be soaked for at least  30 minutes  before washing off with water.

Spray-Method:-

Spray concentrate  RXSOL-20-2001-210  over all soiled areas.  With in  15  and  30   minutes,  RXSOL-20-2001-210 starts   its function then rinse off by water hose. For stubborn deposits, agitation by scrubbing will  assist  the  cleaning operation .

Cargo Tank Cleaning after Mineral Oils

Direct injection method:–

Make  a   solution  of  RXSOL-20-2001-210  between   0.1  and  2.0%   i.e.   one   to    twenty    litres    per  ton   wash water.   Then      use     with     Tank     cleaning      machine ,    Best     results    are     obtained   when   water  is    heated  to  a     temperature      between          60  to  80°C.  Slops Should              be             Constantly              Stripped       from, tank.                                                   

Recirculation method / Ship's Rocking Mottion:– 

Make  soln.  Strength  with RXSOL-20-2001-210 between  0.5 –3 %  and  used  with  Tank Cleaning machines OR fill the tank to 20-30% volume with sea water and add the RXSOL-20-2001-210 up to full dose  . For better  results  heat  the solution  between 60 - 80°C.

NOTE : Dose rate and results will vary depending on amount of contamination.

Spot cleaning- RXSOL-20-2001-210  (concentrate) can be sprayed over surfaces and left  for  20 - 30 minutes  Finally wash down the tank surfaces with hot  water between 60°C and 80°C with  high  pressure   machine .   Keep stripping tank slops and transfer to holding tank/slop tank.Cleaning  of  theOil  side of  Lube  Oil Heat Exchangers  Cleaning  is  best  achieved  by the recirculation method using a heated 20% solution of RXSOL-20-2001-210.
1) First of all drain off any remaining oil from Heat Exchanger.
2) Connect the discharge side of a portable pump to the lower heat exchanger connection & the suction Side of the pump to the bottom outlet of a 200 litre drum.
3) Complete the circuit by connecting the upper connection on the heat exchanger to the top of the drum.
4) Maintain the bath temperature between 60-80 0 C throughout the cleaning operation.  If it is not possible to heat, the operation will need to be extended.
5) Use the pump to maintain circulation for 12 to 15 hours.  When the cleaning is completed, disconnect the lower heat exchanger connection and drain out the cleaning solution.
6) Connect a fresh water supply to the upper heat exchanger connection, and rinse until the water runs clean from the lower connection.                                                                                                                                                                                                                                                              When rinsing is complete, disconnect the water supply and thoroughly drain and dry the heat exchanger

Most Powerful and well know Ship Tank Cleaning chemicals and Detergent.
Tank Cleaner RXSOL-20-2001-210 is specialized for for Black oil, Oily Greasy Mud, effective on all types of SLUDGE generated by petroleum based product.

RXSOL TANK CLEANER HD is Heavy Duty Solvent Based Cleaner - With new generation FORMULA.

#TankCleaner_Fujairah
#TankCleaner_UAE
#TankCleaner_Mumbai
#TankCleaner_Visakhapatnam_Vizag
#TankCleaner_KandlaMundra
#TankCleaner_Chennai
#TankCleaner_Kolkata
#TANKcleaningCHEMICAL_Muscat

Tank cleaning is the process of removing hydrocarbon vapours, liquids or residues.

Tank Cleaner effectively cleans Oil Residue and Sludge from tanks which is compulsory prior to repair tank.

Tank Cleaner HD RXSOL manufacturer and supplier in Mumbai, Kandla, Mundra, Hazira, Chennai, Kolkata, Buz Buz, Visakhapatnam, Gangavaram, Haldia, Paradip, Nairobi, Kenya, Africa, Fujairah, Sharjah, Ajman, Abudhabi, Dubai UAE GULF Middle East, Muscat Ruwi Ghala Barka, Oman Sohar, Yemen, Sudan

Tank cleaning Chemicals suitable and popular to clean oil tankers, shipping vessels, and other waterborne vessels. Also RXSOL TANK CLEAN HD effectively clean engine rooms, pump rooms, storage rooms, bilge tanks, slop tanks, fuel oil tanks and oil spills area.