Product Dose

Concentrated -  Dilutes up to 10 parts for general cleaning, up to 50 parts for light soil.
 

It can be used through hot or cold-pressure washing machines to penetrate, loosen and flush away hardened grease, dirt and grime.
 

Depending on contamination 50 - 200 ml per 10 litrs of water . i. e. 200 mol to a bucket of water .
 

Method of Application and Dose Rates:
1.Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
2.Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
3.Spot cleaning. Hand spray neat or diluted with up to
4.Five parts water and leave for several minutes before rinsing off with clean water.Cleaning of Cargo Tanks to
   remove Soot from Inert Gas Systems.
5.Spray RXSOL-10-1102-210 on with a high pressure cleaning machine and use1:6 with water.If used with hand sprayer,spray the product neat onto the        surface,allowing1 lit.for every12 m2.Use a5-8%solution in a tank washing machine.
6.Leave for about 30-45 minutes.The surface should be kept wet.
7.Wash down with hot water (80°C) and check the cargo tank
8.Repeat the procedure if necessary.

Note: Whenever possible,the cleaning solution should be heated to 60-80°C.If this method is not possible,other conventional methods such as separate rate direct injection,recirulation or hand spraying provide acceptable options.For boiler fire side cleaning,a 10-20 % hot solution, (temp.above 40°C),should be sprayed on to the surfaces to be cleaned.Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary 

Product Properties:

Boiling Point 96.5°C  
Density In g/cm3 at 15°C: 1.04  
Compatibility Metal No known effect  
Rubber No known effect  
pH Alkaline 12.5 to 14  
PACKAGING RXSOL-10-1102-210 Size (Ltr ) 25, 35, 210