SULPHAMIC ACID DESCALER
RXSOL SULPHAMIC ACID DESCALER is an efficient descaling agent and is used for cleaning of a variety of industrial equipments and domestic appliances. RXSOL SULPHAMIC ACID DESCALER can be used for removing water and process scales from industrial equipments. Broadly these find use in the chemical and fertilizer industry, dairy and food equipments, brewery equipment, marine equipment, sugar industry etc.
RXSOL SULPHAMIC ACID DESCALER is non-inflammable and, unlike Hydrochloric Acid, does not give off obnoxious fumes. The safety of RXSOL SULPHAMIC ACID DESCALER has been further increased by the addition of corrosion inhibitors and other chemicals to make RXSOL SULPHAMIC ACID DESCALER a versatile descaling agent which is safer still in terms of equipment corrosion and safety of personnel. The field of descaling is wide and the exact application of RXSOL SULPHAMIC ACID DESCALER can only be determined after considering the nature and extent of scaling, and the type of equipment that is to be descaled.
Application and Dosage
RXSOL SULPHAMIC ACID DESCALER is used in various applications and at different concentration ratio depending upon the amount and type of deposit and system parameters. Normally for a system with hard scale deposits a 5-20% v/v solution is recommended. Preferably this solution should be made with pre-heated water at 70-80°C. The total volume of solution should be about 1.2 times of water holding capacity of equipment to be descaled. Recirculate the solution for about 6 hours using a acid compatible pump. After descaling it is necessary to passivate system with 2% solution of RXSOL ANTISCALANT into the last rinse and return to normal service.
Important
For Extremely Rock Hard And Thick Scaling It Is Recommended To Soften The Scale Prior To Descaling By Recirculating And Soaking 5-10% Solution of Alstascale Ss22 For 2-3 Hours Followed With Rinsing With Plain Water Before Dosing Descalant
In Case of High Silica And Iron Deposits Add 2-3 Parts RXSOL-11-1102-025 To 10parts of Sulfamic Acid
After Dosing Chemical Never Heat Solution By Firing Burners
Handling Measures and Precautions
Proper Human Safety Products Such As Splash Goggles, Lab Coat, Vapor Respirator, Gloves And Boots Should Be Worn While Handling And Applying Chemicals. Splashes On Skin Should Be Washed off With Water Immediately. In Case of Splashing Into The Eyes, Flush It With Fresh Water And Obtain Medical Attention. Should Not Be Injected. Please Refer Msds For More Details.
Storage
This Product Should Be Stored In Original Containers In Cool And Dry Place, Away From Sources of Heat, Flame And Direct Sunlight. Please Refer Technical Data Sheet, Label And Msds For More Details And Shelf Life.
