ULTRASONIC CLEANER PD 400

Choose adequate detergent. The detergents boost ultrasonic performance, helping to achieve the best results. Our powerful cavitation diminishes detergent consumption, obtaining savings in operations cost up to 85.000 € during equipment time. We recommend PDU 400 for steel parts, and PDU 200/201 for aluminum parts.

 

Rinsing after ultrasonic cleaning. The wash can hold on several months. However, the water of the ultrasonic tank gets dirty due to repetitive and systematic cleaning. Thus, it is recommendable to rinse parts once extracted. As soon as parts are extracted, they remain at the platform lift, so it can be rinsing with a connected hose in the network. Water will fall into the ultrasonic tank, returning residual detergent of the parts and dragging the loose particles. In the case of elevated number of cleaning parts, it is recommendable to obtain a rising tank.

 

Part grouping according typology. It is recommendable to use baskets for each type of parts. The parts with similar characteristics have similar cleaning parameters. Grouping by same characteristic parts is perfect for an efficient and homogenous process. The basket contributes to easy use when depositing parts in the machine. As well, parts can be equipped with mobile carts to transport within the workshop.

 

 

Parts with rust and paint. In many cases the clients have the necessity to eliminate rust and paint residues. RXSOL has design a specific detergent (PDU-400), to eliminate dirt in ferrous parts without the necessity of sandblasting and workforce.

 

Long-term vision. Our experience says that our clients pay attention to the initial inversion. It is very important to do an electric consumption study including heat expenses, cleaning times or detergent period changes.