Skip to main content
Email :rxmarinechemical@gmail.com
Contact: 91 08069976670,
91 08069976671 , 91 08069976672

Hydrocarbon Remover Hcf

Book a FREE call with our Technical Expert

 
 

Stock Points

Fully equipped factories at strategic locations:

Mumbai

Gandhidham

Kolkata

Vizag

Chennai

Dubai – UAE

Muscat – OMAN

 

Related Post

Hydrocarbon Remover Hcf

SKU:
SKU
RXSOL-20-2008-025
Product Category:
Short Description
Short Description
HCF cleaner supplier in mumbai, jnpt, mundra, sikka, kandla, hazira, kolkata, haldia, ennore, paradip, manglore, kakinada, vizag visakhapatnam, ennore, chennai, krishanpatnam, Fujairah, Dubai, Sharajh Middle east.
Other Equivalent Brand Products
Also known as

NEUTRAL HCF, HYDROCARBON CLEANER, HCF CLEANER

Product Description

Best cleaner for Zinc coated tanks  for removal of  traces  of HYDROCARBONS from tank,  after cleaning of TANKS from solvent base tank cleaning materials . when possibilities of next cargo will contaminate with hydrocarbon. .

This product classified as a neutral tank cleaner for removal of oils and hydrocarbon free cleaning of zinc coated tanks.

We are HCF cleaner manufcturer and HCF cleaner supplier in mumbai, jnpt, mundra, sikka, kandla, hazira, kolkata, haldia, ennore, paradip, manglore, kakinada, vizag visakhapatnam, ennore, chennai, krishanpatnam, Fujairah, Dubai, Sharajh Middle east Sultan Qaboos Port Sohar Salalah Duqm OMAN

Click her for daily updated HCF cleaner online price 

Application

A very strong low foaming cleaner, Especially formulated to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc.  It is low toxic product with an exceptional solvency power on soil & oily  matter . It is free from Hydrocarbon solvents and minimizes the extreme hazards to personnel in handling materials.

Dose

Using Procedure:-

First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2008-HCF is by direct injection followed by recirculation washing, using tank cleaning machines.

Spraying Method:- 

Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages.  Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.

**Make sure to take all safety precautions are followed when handling / spraying HCF**

Injection Method– not applicable.                    

Re-circulation Method:– 

Fill tank with fresh water and heat up to warm 50oC .  IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and HCF to make a 2.5% solution.  A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank.  Under normal circumstances, between 2.5% and 4.5% will be sufficient strength.  If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material. 

                                             * Use a strainer at the pump stack when circulating any solution.*

Note
Note

Tank Lining– Stainless / Epoxy / Phenolic / Zinc-silicate.

Technical Specifications

Characteristics:

  • Removes grease, oil, carbon deposits, soil and grime.
  • Keeps loosened deposits in suspension preventing re-deposition.
  • Low toxic.  , Non-flammable.
  • Free from hydrocarbon solvents.
  • Effective and economical in use , Water-based cleaner.
  • RXSOL-20-2008 has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
  • Non-corrosive to ferrous metals.  Suitable for all tank-coatings.
  • Can be used for gas and hydrocarbon freeing of tanks.
  • Can be used for deodorizing
  • Contains wetting agents.

Note:- Completely miscible with sea water.

Product Remark
Remarks

FAQs — Hydrocarbon Remover HCF Remover

1) What is Hydrocarbon Remover used for?

A powerful, low-foaming cleaner formulated to soften and remove baked-on drying oils. Ideal for cleaning after handling animal and vegetable oils, fish oils, tall oils, tung oil, and similar residues.

2) Is it safe for personnel?

Yes. It is low in toxicity, free from hydrocarbon solvents, and minimizes hazards during handling. Standard PPE such as gloves and goggles is still recommended.

3) How effective is it on stubborn residues?

It has exceptional solvency power on soils and oily matter, making it effective even on hardened or baked-on deposits.

4) Is it suitable for all industries?

Yes. While widely used in marine cleaning, it is also effective in food processing, oil handling, and industrial maintenance where oils and greasy residues are present.

5) Does it contain hydrocarbon solvents?

No. It is completely free from hydrocarbon solvents, making it safer for the environment and personnel.

Related Information
Note

Tank Lining– Stainless / Epoxy / Phenolic / Zinc-silicate.

Supply Location
Locations

HCF Neutral Tank cleaner manufacturer and supplier in Mumbai, Mundra, Gandhidham, Chennai, Ennore, Visakhapatnam, Gangavaram, Kolkata Haldia, Paradip, Navlakhi Hazira, Dubai Sharjah Abudhabi, Ajman, Fujairah UAE Middle East, Muscat Sohar Oman, Kenya Mombasa, Uganda Jinja, Canada

Related Products:

Request Quote

Product Categories

 
 

Copyright © 2021 Powered By RXMARINE - All Rights Reserved