Scale Remover-11

RXSOL HEDP 60% is an organophosphonate with multifunctional properties like sequestration, deflocculation, threshold inhibition and hydrolytic stability, as a single active ingredient. Because of the combination of these properties. RXSOL HEDP 60%  has a wide range of applications. One of the most important applications is in scale prevention and corrosion inhibition in water treatment.

It is used as a strong chelating agent for metal ions like Ca, Mg & Fe in water treatment, textile applications. They show efficient inhibition for CaCO3 & CaSO4 alone or in combination with low molecular weight polymers. They show efficiency in protecting metal corrosion. This is having very strong chlorine stability.

Etidronic acid / HEDP supplier and Exporter in Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Dubai, Sharjah, Abu Dhabi, Ajman.

Synthesis / Manufacturing Process of HEDP:
The primary raw materials used to manufacture HEDP are acetic anhydride and either phosphorus acid or phosphorus Trichloride. The phosphorus trichloride is converted to phosphorus acid within the reaction vessel, and then reacts with the acetic anhydride.

Uses / Application of HEDP
HEDP is used as a strong Chelating Agent for Metal Ions like Ca, Mg & Fe in water Treatment, Textile, Sugar Processing, Dye, Soaps & Detergents.

Properties :

HEDP is a 60% active aqueous solution and is part of the Biphosphonic Acid Group. It is highly water soluble and stable under harsh conditions, which makes it ideal for water treatment. The main uses in the water treatment industry are, reverse osmosis formulation, cooling water treatment, boiler water treatment, swimming pools, scale and corrosion inhibitor.
 

Handling :  HEDP 60% is slightly toxic by ingestion, practically non-toxic on dermal application, moderately irritating to the skin and corrosive to the eyes. Care should be taken to avoid contact with skin and eyes. In case of contact, flush the affected area with plenty of water. Goggles and rubber gloves should be used at all times when working with the concentrated material.

Storage : Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Over time, pressure may increase causing containers to burst Handle and open container with care.

Packing : 65 Kgs HDPE Carbouy / 275 Kgs Polydrum / 1400 Kgs IBC
 

HEDP 60% ( 1, Hydroxyethylidene Diphosphonic Acid)

Description:
HDPE is an organo phosphoric acid Corrosion inhibitor. It can chetale with Fe, Cu, and Zn ions to  form stable chelating compounds . It can dissolve the oxidized material on Metal Surfaces.HDPE can react with metal ions with water system to form hexa element Chelating Complex, with Calcium ion in Particular.Therefore, HDPE is Good Anti Scale and Visible threshold effects.

Physical Properties:
Chemical Name:      1-Hydroxyethylidene-1,1- Diphosphonic Acid Etidronic Acid
Abbreviation:            HDPE
Case No:                   2809-21-4
Molecular Structure:
Molecular Formula:  C2H8O7P8
Appearance:            Clear Colourless to pale yellow liquid
 Molecular Weight:   206

Specification:
Color and physical form:                Clear , colorless liquid
Molecular Weight :                         206
Active content:                               60 % (+/-2 %)
Density :                                        143-1.47
pH of 1%  Solution :                      Max 2
Chelation Value:                            NLT 500
Phosphorus Acid Content:             Max 2 %
Chloride :                                       Max 150 PPM
Iron:                                               Max 20 PPM

Packaging:                                      65 Kg / 250Kg  /290Kg  HDPE Drum / IBC
Other Information
Reach Registration :                       No
MSDS:                                            Available on Request
Sample / Other Details:                  Available On Request

Application /Uses:
HDPE Is used as Scale and corrosion Inhibitors in circulating cooling water systems, oil fields and low pressure boilers in fields such as electric power, Chemical Industry, metallurgy , fertilizer etc. In the Light Woven Industry ,HDPE Is used as Detergent in Metal and non metal .In the dyeing Industry,HDPE is Used as Peroxide Stabilizer and dye fixing agents.In non Cyanide electroplating HDPE Is used as chelating agents.

Customized / Special Grades also be provided as per customer requirement . 

Seawater Hydrometer supplier in Dubai, Sharjah, AbuDhabi, Ajman, Fujairah UAE Middle East, Muscat Oman, Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Haldia, Howrah.

 INSTRUCTIONS FOR USE
1. A clean, representative sample of the supporting water should be obtained by means of a sampling can or other suitably designed sampling apparatus. A sample of at least 1 liter will help to ensure that the temperature and density do not change unduly between the collection of the sample and taking of the readings. The depth of water in the container must be sufficient to allow at least 25mm clearance between the bottom of the hydrometer and the bottom of the hydrometer and the bottom of the container. The internal diameter of the container or jar should be at least 50 mm.
2. The number of samples to be taken, also at which depths and at which positions outside the vessel they should be taken, may be important according to the circumstances.
3. Readings may be taken by lowering the hydrometer into a suitably shaped sampling apparatus or by transferring the water to a suitable glass test jar. If a metal or other non-transparent container is used for taking readings, ensure that it is full to the brim. If a glass test jar is used, it should preferably be rinsed first, so as to avoid undue temperature changes. The container or test jar should be shielded from draughts, which may affect the readings.
4. The reading must be taken in the sampling apparatus or glass test jar as rapidly as possible Undue delay in taking the reading could result in temperature changes leading to inaccurate results. In case of doubt, a repeat sample should be taken in order to verify the first observation
5. Ensure that the stem of the hydrometer and the surface of the water sample is free from grease and oil since the accuracy of the readings could be adversely affected
6. Hold the hydrometer vertically by the top of the stem and gently lower it into the water sample until it floats freely
7. Take the hydrometer reading where the level liquid surface meets the graduated scale.

CORRECTIONS TO HYDROMETER READING
1. For ydrometer the appropriate corrections should be applied.
2. For most Draft Survey purposes, no further corrections to the readings are needed.
Reading is most correct when the glass hydrometer is used at a temperature of 15°C. If immersed in water at temperatures higher or lower than 15°C, the instrument will expand or contract so that, for precise laboratory work, a small correction would be applicable However, for Draft Survey work, it should be noted that the ship itself will normally expand or contract according to the temperature of the water in which it is rating. The corrections required to compensate for these changes in volume are of opposite signs and tend to compensate for each other. As it is not practicable to calculate any temperature corrections for the ship, for most Draft Survey purposes no correction should be applied for the expansion or contraction of the hydrometer glass

Hydrometer Density supplier in India UAE Middle East Gulf Muscat Oman Nairobi Kenya.

Appearance                                                                     White free flowing crystalline powder

Density                                                                             1.98 SG

Bulk Density                                                                      71 to 78 Ib/ ft³

Aqueous Solubility                                                            Up to 24%, 278.9 gL of solution at 68˚F (20˚C)

Purity                                                                                 98.83%-99%

K20                                                                                    62% and above

Potassium Chloride finds numerous uses, especially in the field of Agriculture, Medicine, Radiation, food & beverages, and more. Another well-known use of this salt is as a fire extinguisher. 

We are major exporter of Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa

Potassium Permanganate Impregnated Alumina Manufacturer, Supplier and Exporter from India to Middle East. We are keeping ready stock of materials Potassium Permanganate Impregnated Alumina at Kandla - Mumbai, Kolkata - Haldia, Visakhapatnam - Gangavaram, Chennai - Ennore, Fujairah - Dubai - UAE. Share your private labeling and export inquiry with us to get most discounted price.

International quality product of activated alumina customized as per your specifications. Our skilled quality control supervisors monitor the entire manufacturing process to ensure production of International Quality chemicals.

Uniform bead sizes Potassium Permanganate Impregnated Alumina is a uniformly sized bead. It provides low pressure drop to minimize channeling and ensures utilization of the full bed column section.

Potassium Permanganate Impregnated Alumina manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Potassium Permanganate Impregnated Alumina at a competitive price from us. We have ready stock of Potassium Permanganate Impregnated Alumina in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Separator Cleaner is a colorless, strong acid, liquid cleaning agent with strong degreasing properties.  This product can only be used on austenitic stainless steel and is corrosive on all other metals.

Specific Gravity (20°C)                    : 1.03 to 1.04

Flash point                                         : None

pH (1% solution)                                : < 2

IMO-Code                                     :  8-2031-T700.

NATURE OF SPECIAL RISKS AND SAFETY ADVICE

In accordance with the latest E.E.C. Council directives:

R 36                :     Irritating to eyes and skin.
S 2                   :     Keep out of reach of children.
S 28                 :    After contact with skin rinse immediately with plenty of water.

Organic Acid Degreaser manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Organic Acid Degreaser at a competitive price from us. We have ready stock of Organic Acid Degreaser in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.