Alka Clean EDA 30 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Alka Clean EDA 30 at a competitive price from us. We have ready stock of Alka Clean EDA 30 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
RXMARINE CHEMICAL TAG::
RXSOL-16-1696-030 is an over all purposes cleaner for Ferrous and Non-ferrous metals and has wide range of applications. The cleaner has long service life with very good cleaning effect. It is alkaline in nature without Cyanide and any complexing agent and it removes grease, soil, weak scale layers and leaves the surface active and bright.
CONTROL
The cleaner solution can easily and effectively be controlled by removing floating oil over the surface either manually or by means of circulating pump and an oil trap regularly. The concentration of the solution can be maintained by analysing the alkalinity of the solution by simple titration with standard acid using Phenolphthalein as an indicator.
CAUTION
RXSOL-16-1696-030 is alkaline in nature and contact of the skin or eyes should be avoided.
NOTE :
The data set forth in this Bulletin is believed by Rx Marine International to be true, accurate and complete but is not guaranteed. Our sole warranty is as stated in our standard Terms and Conditions of Sale. We cannot warrant out customers will achieve the same results from any bulletin because we do not have control over the condition of use; nor can we assume any responsibility for our products in a manner which infringes the patents of third parties.
- Prior to all kind of plating.
- Prior to Blackening and Phosphating.
- In a continuous Automatic strip, wire or coil cleaning purposes.
BATH MAKE UP
- Fill the tank approximately 2/3 rd of the tank with warm water.
- Add the required amount of RXSOL-16-1696-030 and stir till all the material is disloved.
- Fill the tank to working level with water and heat to operating temperature.
MAINTENANCE
The concentration of the bath can be best determined by simple acid base titration using phenolphthalein as indicator.
Titrate 5ml of sample solution against 1N H2SO4. The concentration of the cleaner can
be known by the formula given below : Calculation : Conc. = R x N x 15 Where, R = Burette reading N = Normality of H2SO4.
Any grease that collects on the surface during operation should be removed in order to avoid resoiling of components during lifting out of the solution. The loss of water by evaporation has to be made up from time to time. If the solution acts slowly after some period of usage and some components are no longer sufficiently cleaned, the bath should be replaced with the new one.
Also refer Alkaclean S one of popular Tank Cleaning Detergent. which is blend of many surfactants with sodium hydroxide. For more details pl. click here. ( http://rxmarine.com/oil-grease-dissolver )