Clay Control 3C
Clay Treat 3C, Clay Control Copolymer, CLAY STABILIZER-CC300KF
Clay Control Polymer 3C is a unique combination of a low molecular weight clay control polymer and potassium formate. Clay Control Polymer 3C provides effective clay stabilization through ionic effects.
Clay Control Polymer 3C is a high-performance substitute for KCl, and delivers performance equal to or better than KCl even at low dosages.
The addition of potassium formate greatly enhances the performance of the low molecular weight polymer, and permits better stabilization at application rates below where the polymer alone or potassium formate alone would be effective.
Normal clay control polymers depend on polymer length to stabilize clays; however, they are “torn” apart by increased shear. Since Clay Control Polymer 3C depends on its cationic charge for clay control, shear does not degrade its performance.
Clay Control Polymer 3C has high-temperature stability, low formation damage, and is compatible with most drilling, completion, workover, or workover fluids. Although cationic in charge, Clay Control Polymer 3C is completely compatible with anionic and nonionic surfactants.
RXSOL Clay Control Copolymer 3C is widely used in oilfield applications.
Application Information
Application rate should be determined by testing on the specific shales to be treated. A normal treating rate is 1–5 gallons per thousand gallons (gpt) treating fluid for performance equivalent to 2% KCl. Reactive shales may require higher dosage rates, or the addition of more potassium formate for best inhibition.
What are the BENEFITS and ADVANTAGES of using RXSOL Clay Control Copolymer 3C
- Instantly and permanently adheres to clays
- Prevents clay swelling
- Stabilizes fines
- Compatible with anionic surfactants
- Resistant to shear degradation
- Increased temperature stability
| Property | Typical Value |
|---|---|
| Appearance | Clear, water-white to light yellow liquid |
| Specific Gravity | 1.14–1.17 |
| Density | 9.50–9.75 lbs/gal |
| Solubility in Water | Complete |
| pH (neat) | 5.8–7.5 |
Clay Pack Flow Test
This test determines the cumulative volume of fluid that can flow through a sand & clay mixture at 20 psi of air pressure. The greater the volume, the better the clay control.
| Time (min) | Vol (ml), Fresh Water | Vol (ml), Clay Control Polymer 3C @ 2 gpt |
|---|---|---|
| 0 | 5 | 17 |
| 1 | 15 | 48 |
| 3 | 17 | 71 |
| 5 | 23 | 88 |
| 10 | 25 | 115 |
What are the BENEFITS and ADVANTAGES of using RXSOL Clay Control Copolymer 3C
- Instantly and permanently adheres to clays
- Prevents clay swelling
- Stabilizes fines
- Compatible with anionic surfactants
- Resistant to shear degradation
- Increased temperature stability
Clay Control - 3C manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Clay Control - 3C at a competitive price from us. We have ready stock of Clay Control - 3C in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
