Enviro Soft cleaner degreaser supplier and distributor in Mumbai JNPT, Hazira, Sikka Jamanagar, Kandla Gandhidham, Ennore Chennai, Vizag Visakhapatnam, Kolkata Haldia, Paradip, Fujairah, Ajman, Abudhabi, Dubai, Sharjah, Muscat Oman, Canada
MUSCAT CHEMICAL TAG::
It is a Bio degradable cleaning and degreasing products. Suitable to use with PRESSURE washing equipment and safe to the person handling it.
Pleasant citrus odour.
DOSE : Refer to technical datasheet to separate for at least 3 hrs before passing through an oily water separator.
Excellent for use with pressure - washing equipment and for industrial application. It is suitable for stainless steel tanks having, epoxy / phenolic linings
Environmentally safe .
Highly effective Water-based degreaser.
Ingredients are all biodegradable
Non-flammable , Pleasant citrus odour.
Highly cost effective concentrated cleaner Very economical dilution rate, 1 to 15 parts of water.
Can be used as Accommodation cleaner for bulkheads, decks and toilets. Compatible on most types of plastics and vinyls floor
NOTE : FOR Hydrocarbon freeing after cleaning with hydrocarbon solvent cleaners like Sea cleaner ( RXSOL-20-2002 ), Tank clean (RXSOL-20-2001 ) and OSD (RXSOL-17-1012) etc .
A versatile cleaner which can be used for Tank or general cleaning.
MANUAL DEGREASING : May be applied neat or diluted with water up to 1 part to 15 – 20 parts by using a cloth ,brush or spray. After use as an engine room cleaner, bilge slops must be allowed to separate for at least 3 hrs before passing through an oily water separator.
Tank & BILGE CLEANING :RXSOL-20-3022-025 is recommended for any of the standard tank cleaning methods including ship motion , pressure spray washing and recirculation method after mineral, animal, fish and vegetable oils.
Enviro Degreaser specialized for engineering cleaning operation for engine room cleaning and engine deck cleaning operation. Enviro Degreaser is specialized marine engine cleaning chemicals.
Application-METHOD:- ( Dose Rate )
1)BY WASHING MACHINE : For direct injection into tank This will require a solution strength between 0.03 and 1.5%, (0.3-15 lts per thousend lts of wash water).
2)BY RECIRCULATION METHOD : Working strength should be 0.05 and 1% ( 0.5–10 Ltres per ton wash water ) by weight in fresh water , based on capacity of the equipment . This solution can be re-used until no longer effective.
3) Spot cleaning. RXSOL-20-3022-025 can be hand sprayed neat or diluted up to 5 parts water and allow 15 to 20 minutes contact time to penetrate deposits . Finally wash off with water jet . The best results will be obtained when wash water is heated to 40-60°C .