Oil Spill Dispersant Type-III 210 Ltrs

Oct 30, 2024
0 comment
blog

Oil Spill Dispersant Type-III 210 Ltrs

It is a bio-degradable low toxic product with excellent efficiency of oil dispersant nature . This product is specially designed for complete emulsification of oil by which subsequent dispersion takes.

Description:

It is a bio-degradable low toxic product with excellent efficiency of oil dispersant nature . This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place.

RXSOL-17-1047-210 Emulsifier based product with excellence efficiency and low toxicity with superior penetrating & surface active agents . This product is specially designed for complete emulsification of oil by which dispersion takes place .

AREA: At SEA , at shore either in port or off board , for industrial purpose.

Procedure Of Use:-

Oil-Spills-at-Sea
RXSOL-17-1047-210 is used concentrated by direct spraying to clean up oil spills at sea . It can be applied by hand spray, work boats with mounted spray booms , or fire hoses with injectors. Allow some time for the oil to absorb the RXSOL-17-1012-SB and then disperse mixture by vigorous agitation using Fire hoses , Ship's propeller, Breaker boards towed behind work boats , etc .

Oil - On - Beaches - And - Shore - Line
RXSOL-17-1012-SB should be applied neat by spraying over oiled areas. Allow time for the oil to absorb the DISPERSANT then follow by washing down the beach or rocks, etc. The treatment rate depends on the nature and thickness of the oil spill, also on the age and condition. Under conditions where it is a thin slick of oil, 1 litre of RXSOL-17-1047-210 is enough to treat approximately 20-30 Sq.M of oil. In many cases, several applications may be necessary. (Depends on the size of contamination in the affected area )

Oil Spill On Deck
Remove as much of the oil as possible, then spray RXSOL-17-1047-210 over area covered by the oil & allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose Depending on type of oil it may be necessary to use several applications.

Code: RXSOL-17-1047-210

Other Equivalent Brand Oil Emulsifier dispersant

Short Description: This product is specially designed for complete emulsification of oil by which dispersion takes place .

Active Matter: 78-83%

Oil Spill Dispersant Type-III 210 Ltrs

Application:

Oil spills at sea, harbours, beaches, or on land. Can also be used in industries. RXSOL-17-1047-210 is particularly effective over a broad range of oil spill conditions especially in areas which req.

Application:

Oil spills at sea, harbours, beaches, or on land. Can also be used in industries.

RXSOL-17-1047-210 is particularly effective over a broad range of oil spill conditions especially in areas which require exceptionally low toxicity. These include

Floating oil on harbours, coastal water and inland waterways.
Oil spills on ship decks, docks, piers beaches and land.
Oil accumulation on pilings and dock support structures.

It is designed to quickly and easily disperse and eliminate the risk of pollution, fire and slippery hazards caused by the accidental spillage of oil.

Application:

RXSOL-17-1047-210 is ready for application directly from the barrel land can applied by pressure spray ejector nozzle jet, mopping or brushing in to oily surfaces.

Spraying :

For oil spills on water, decks, docks and beaches the most economical results are obtained by the following procedure :

Thoroughly wet the oil by spraying OIL SPILL DISPERSANT Type III through a pressure device.Keep the spray moving in a progressive pattern so as to avoid washing the product.
Allow the OIL SPILL DISPERSANT to combine with the oil for 15 to 30 minutes.
Then emulsify the mixture by agitating it with a fire jet spray of salt or fresh cold water. On water the propeller action of a launch is also effective for agitating the mixture. (Agitation is most important for efficient usage).

Ejector Nozzle Jet :

For large oil spills which must be dealt with quickly. It is advisable to use an ejector nozzle attached to a fire house. The ejector nozzle draws the OIL SPILL DISPERSANT Type III into the jet stream when is then directed at the oil-spill in a progressive pattern. The force of the jet ensures agitation.

Mopping & Brushing :

If spraying equipment is not available or for small spills on ships decks, docks, and piers the following method can be used. Pour OIL SPILL DISPERSANT Type III on the oil spill and mix thoroughly with a mop, broom or brush. Then add salt water or fresh water and continue mixing. When the oil is completely emulsified, nose with water. Also for removing accumulations of oil from pilings and dock support structures scrubbing with a large stiff brush may be necessary after first trying the spray method

Using Procedure:

1 liter of RXSOL-17-1047-210 is enough to treat approx 20-30 sq meters of dispersed oil . Appearance Amber liquid / Low viscous

Using Procedure:

1 liter of RXSOL-17-1047-210 is enough to treat approx 20-30 sq meters of dispersed oil .

Appearance	Amber liquid / Low viscous
Odor	Sweet
Density	In g/cm3 at 15°C: 1.00	NOTE : SHELF LIFE 5 YEARS
Flash Point	MATERIALS BOILS AT 68°C	EFFICIENCY :
Compatibility		A . SEA WATER 68%
Metal	No known effect	B. FRESH WATER 78%
Rubber	AVOID	STABILITY :
Synthetic rubber	May swell	A . SEA WATER 97.5 %
pH	7 +0.5	B . FRESH WATER 98.8 %
Packaging	Order No.:	Size (in litres)
	RXSOL-17-1012-SB	25 , 30 , 210

Note:

Biodegradable and having low toxicity . Self –life 5 YEARS( from mfr. date ) . HIGH – Emulsification rate Converts hydrocarbons particle in to very fine emulsions.Ready to use product. Suitable for Crurd;

Note:

Biodegradable and having low toxicity . Self –life 5 YEARS( from mfr. date ) .

HIGH – Emulsification rate Converts hydrocarbons particle in to very fine emulsions.Ready to use product. Suitable for Crude / Bitumen / Residual / Diesel / Kerosene, White spirit & Lube oils etc .Effective on oil spills at platefoprm , during loading or discharging of cargo or bunkers .For cleaning of spills on Deck, Ships side, Piers, Wharfs, etc. where allowed .

Remarks:

Oil Spill Dispersant Type-III manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Oil Spill Dispersant Type-III at a competitive price from us. We have ready stock of Oil Spill Dispersant Type-III in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Packing Size: 210.00 Ltr.

Available Packing Size:

HASHTAG:

#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant

#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable

#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater

#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Company Info

RX MARINE INTERNATIONAL is a manufacturer and distributor that specializes in providing custom solutions. Wheather it is private labeling, custom packaging, chemical manufacturing or product sourcing, we have the team in place to make business with us as simple as possible. we provide excellent products and service to markets. Our customer located world wide.

We have sold over a million Ltrs of RXSOL products without a failure. We put this down to the fact that, as manufacturers, we have total control of the raw materials we use and our manufacturing process. Many of our competitors source their tankcleaner form third parties abroad and cannot stand by their products as confidently as we can.

Oil Spill Dispersant Type-III 210 Ltrs