Skip to main content
Email :rxmarinechemical@gmail.com
Contact: 91 08069976670,
91 08069976671 , 91 08069976672

Lube Oil Additive Cleaner

Why Choose RX Marine International

Experience

30+ Years of Excellence

Proven industry leadership and chemical innovation since 1990.

Global Reach

Global Reach

Servicing clients in 35+ countries with reliable logistics.

Formulation

Advanced Formulation

High-performance chemicals built on cutting-edge R&D.

Fast Delivery

Fast Delivery

Ready stock and express fulfillment across regions.

Book a FREE call with our Technical Expert

 
 

Stock Points

Fully equipped factories at strategic locations:

Mumbai

Gandhidham

Kolkata

Vizag

Chennai

Dubai – UAE

Muscat – OMAN

 

Related Post

Lube Oil Additive Cleaner

SKU:
SKU
RXSOL-20-2043-201
Product Category:
Category
Short Description
Short Description
Lube Oil Additive 1 & 2 Cleaner This product is prinicipally developed to make LUBE additive water soluble as well as depolymerise action of base product.
Product Description

Specialize developed formulation to dissociate bonding of lube oil additive from surface of tank. This product is prinicipally developed to make LUBE additive water soluble as well as depolymerise action of base product.

Application

For Cleaning of Wide range of different types of additives for Luboil and Gas oil. In this category we kept light products with low viscosity until dark products with very high viscosity, which are Soluble in light Base oil and Gas oil.

Dose

Prepare solution for Butter worth in  freshwater  or seawater: 0.4 % RXSOL-20-2043-201

Note
Note

Lube Additives 1   ( Soluble in light Base oil and Gas oil )


Wide range of different types of additives for Luboil and Gas oil. In this category we kept light products with low viscosity until dark products with very high viscosity, which are Soluble in light Base oil and Gas oil.

Following Steps are usefull ::: A. Pre-Cleaning  - The pre-cleaning should be carried out with hot base oil or gas oil.  Fill 3-5 m3 gas oil or light  base  oil into  the  tank  and  Butter  worth  the  tank  sufficiently  by recirculation. If base oil is used the  cleaning  temperature should be above 60° C. If gas oil is  used  the  temperature should not exceed 50° C (flash point).

B. Butter   worth   the   tank  2  hours  with  hot  seawater  or freshwater (70-80°C). 

C . Prepare the following  cleaning  solution  in  freshwater  or seawater: 0.4 % RXSOL-20-2043-201 Butter worth the tank 1, 5 to 2, 0 hours by  recirculation. The  temperature  should  be approx. 70°C.The temperature can  be  achieved/maintained by means of   heating  coils, or  going  via t he  Butter  worth heater. Depending  on  the  amount  of  cargo  residues  the solution can be used for 1 to 3 tanks. 

D. Rinse the tank with fresh water. 

E. Ventilate, mop and dry the tank.

 

Lube Additives 2   

In this category of Lube Additives a pre-cleaning with base oil or gas oil is not necessary

A. PRE-CLEANING - Pre-wash the tank with freshwater of a warm to moderate temperature. Butterworth the tank 1 hour with seawater or freshwater of a moderate temperature.  Then Butterworth the tank 1 hour with hot seawater or freshwater (70- 80°C).      

B.
 Prepare the following cleaning solution in freshwater or seawater 0.4  % RXSOL-20-2043-201 Butter worth the tank 1, 5 hours by recirculation with a temperature of approx. 70°C.The necessarytemperature can be achieved/maintained by means of heating coils or going via the Butterworth heater. Depending on the amount of cargo residues the solution can be used for 1 to 3 tanks.

C.
 Rinse the tank with fresh water.

D.
 Ventilate, mop and dry the tank.

 

Further Cleaning Suggestions: EXTRA CLEANING TIPS

  •  For some Lube Additives a pre-cleaning with base oil or gas oil is not necessary. After butter Worthing with warm/ moderate water followed by hot water the residues can be removed by recirculation of a solution of 0, 4 % RXSOL-20-2043-201 or by injection of the RXSOL-20-2043-201 into the Butter worth system during the hot wash... The suitability of the RXSOL-20-2043-201 solution for the
     Lube  Additive in question can be easily pre-tested in a glass bottle.
  •  Some Lub Additives with higher viscosity can be removed by recirculation of a solution of 0.4% RXSOL-20-2043-201 and 5%
     RXSOL-20-2005-025.
  •  Residues of Lube Additives can be sprayed and manually removed  with undiluted RXSOL-20-2005-025
  •  Residues of Lube Additives can be as well sprayed and manually removed by a gas oil.
Product Remark
Remarks

Related Information
Note

Lube Additives 1   ( Soluble in light Base oil and Gas oil )


Wide range of different types of additives for Luboil and Gas oil. In this category we kept light products with low viscosity until dark products with very high viscosity, which are Soluble in light Base oil and Gas oil.

Following Steps are usefull ::: A. Pre-Cleaning  - The pre-cleaning should be carried out with hot base oil or gas oil.  Fill 3-5 m3 gas oil or light  base  oil into  the  tank  and  Butter  worth  the  tank  sufficiently  by recirculation. If base oil is used the  cleaning  temperature should be above 60° C. If gas oil is  used  the  temperature should not exceed 50° C (flash point).

B. Butter   worth   the   tank  2  hours  with  hot  seawater  or freshwater (70-80°C). 

C . Prepare the following  cleaning  solution  in  freshwater  or seawater: 0.4 % RXSOL-20-2043-201 Butter worth the tank 1, 5 to 2, 0 hours by  recirculation. The  temperature  should  be approx. 70°C.The temperature can  be  achieved/maintained by means of   heating  coils, or  going  via t he  Butter  worth heater. Depending  on  the  amount  of  cargo  residues  the solution can be used for 1 to 3 tanks. 

D. Rinse the tank with fresh water. 

E. Ventilate, mop and dry the tank.

 

Lube Additives 2   

In this category of Lube Additives a pre-cleaning with base oil or gas oil is not necessary

A. PRE-CLEANING - Pre-wash the tank with freshwater of a warm to moderate temperature. Butterworth the tank 1 hour with seawater or freshwater of a moderate temperature.  Then Butterworth the tank 1 hour with hot seawater or freshwater (70- 80°C).      

B.
 Prepare the following cleaning solution in freshwater or seawater 0.4  % RXSOL-20-2043-201 Butter worth the tank 1, 5 hours by recirculation with a temperature of approx. 70°C.The necessarytemperature can be achieved/maintained by means of heating coils or going via the Butterworth heater. Depending on the amount of cargo residues the solution can be used for 1 to 3 tanks.

C.
 Rinse the tank with fresh water.

D.
 Ventilate, mop and dry the tank.

 

Further Cleaning Suggestions: EXTRA CLEANING TIPS

  •  For some Lube Additives a pre-cleaning with base oil or gas oil is not necessary. After butter Worthing with warm/ moderate water followed by hot water the residues can be removed by recirculation of a solution of 0, 4 % RXSOL-20-2043-201 or by injection of the RXSOL-20-2043-201 into the Butter worth system during the hot wash... The suitability of the RXSOL-20-2043-201 solution for the
     Lube  Additive in question can be easily pre-tested in a glass bottle.
  •  Some Lub Additives with higher viscosity can be removed by recirculation of a solution of 0.4% RXSOL-20-2043-201 and 5%
     RXSOL-20-2005-025.
  •  Residues of Lube Additives can be sprayed and manually removed  with undiluted RXSOL-20-2005-025
  •  Residues of Lube Additives can be as well sprayed and manually removed by a gas oil.
Supply Location
Locations

Lube Oil Additive Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Lube Oil Additive Cleaner at a competitive price from us. We have ready stock of Lube Oil Additive Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Related Products:

Product Categories

 
 

Copyright © 2021 Powered By RXMARINE - All Rights Reserved