Medium heavy duty solvent based cleaner for mineral oil & grease
Sea cleaner Voyage product classified as Medium heavy duty solvent based cleaner for mineral oil & grease. Sea cleaner as voyage tank cleaner contains strong emulsifier along with penetrating solvent for removal of heavy crude oil, soot, ashpalt and carbon black stains. The typical cleaning procedure of sea voyage clean voyage as a tank cleaner is Strip tank of all possible oil, fuel, residue. If there is any possibiliites of heating the residuel area to maximize stripping suction then heat fuel, oil residual part to assist removal then flush tank with seawater. Then follow following steps :
1) Close all suction and discharge valves .
2)1st Dose Fill the tanks by 10 to 20 litre sea voyage clean for per tone of water through pipe or manhole
3) Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.
4) Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
5) Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
6) Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
7) For completion add second dose of Sea voyage clean, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
8) Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
9) To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.
we are largest supplier of sea voyage cleaner in Mumbai, Kandla, Visakhapatnam - Gangavaram, Kolkata - Haldia, Chennai - Ennore, Fujairah - Dubai, Sharjah - Middle East
Product: