Metal Clean Bright as a Aluminium Cleaner
Aluminium Oxide also can be remove by using Metal Clean Bright diluted solution 10 to 30% . During cleaning application it is very important to take care each and every effect of Metal Clean Bright with aluminium. Maximum cotact time of Aluminimu with Metal Clean Bright should be 2 - 7 Minutes. Otherwise our product list have specizalized products for cleaning of aluminum RXSOL-16-1028-025 .
Powerful Solid Aluminium Cleaner
Wipe on. Wash off Aluminium Cleaner
The ease and speed of RXSOL advanced technology Aluminium Cleaner for Solid Aluminium fixtures and fittings etc.. makes it the cleaning product of choice for every Householder, Antique Restorer, Cleaning Company and is the Bar Keepers friend. Removes; Heat Discolouration caused by over heating, Mildew, Burn marks Flame marks,Tarnish, Mould, Mildew, Rust and Stains
RXSOL Aluminium Cleaner sanitizes killing 99.9% of germs, is safe to touch, smells fresh, usable without gloves without the need for tedious scrubbing, and is Safe on the environment.
One Tub of RXSOL Aluminium Cleaner replaces a dozen of other supermarket cleaning products saving money and time, Making valuable room in your cleaning cupboard shelves.
Aluminium Cleaner cleaning solution
Help is at hand, though, in the form of RXSOL a revolutionary new cleaning system that is taking the world by storm Compared to many other types of Aluminium Cleaner or metal cleaners available, RXSOL offers a whole array of features and benefits. It has received an independent review rating as being the most convenient, effective, easy-to-use, non-odour, cost-effective and non-toxic cleaning detergent on the market today.
Most importantly, RXSOL is safe to use and highly effective. This product is 11 times more powerful than caustic soda yet it is harmless and surprisingly contains no phosphorous. It requires no gloves, is safe to touch, there are no fumes given off, no odour and no smell.
RXSOL is also many times more powerful than other well-known Aluminium metal cleaners.
The wipe-on, wipe-off formula means that RXSOL is also an extremely easy to use cleaner and will save you time.
Its fast, concentrated solution means that just a small amount will quickly tackle a large area.
As long as your Aluminium isn't lacquered, even heavy tarnish will be effortlessly removed from its surface. And as it is non-abrasive, RXSOL is equally suitable for use on your most delicate or treasured copper items such as antiques.
The protection offered by RXSOL will last for a long time as it contains an anti-tarnish corrosion inhibitor which will keep your Aluminium cleaner for longer.
Value for money is ensured by the simple fact that RXSOL is a multi-purpose all-in-one product. Ideal for restoring shine to Aluminium it will also remove years of accumulated dirt, tarnish and oxidisation from many other metals including stainless steel, brass, silver, aluminium, tiles and ceramics.
Instead of having to buy a separate cleaner for your Aluminium pans, your silver jewellery and other household metal items, RXSOL will do it all! And, because it is available in a choice of four different sizes ranging from 500g right up to 10kg, you only need to buy the amount of cleaner you actually need.
So, if you want to restore the lustrous shine and polish to your Aluminium fixtures and fittings with minimum effort and long-lasting results. RXSOL is the cleaner for you!
But when you are going to use Metal Clean Bright for Aluminium cleaning, Before application of Metal Clean Bright, we have to understand its cleaning principal...
In general terms and thumb rule for Metal Clean Bright is MORE RUST required more Metal Clean Bright. Chemically Rust { iron oxide (FeO) } is soluble in pH values below 4.0, . Thus, the oxide (oxygen) dissolves as it is formed instead of depositing on the metal's surface. So it is clear more rust required more Metal Clean Bright to get dissolve. In practical if the area is fully rusted corroded then direct Metal Clean Bright can be used to dissolve rust particles, while in light contaminated part Metal Clean Bright can be diluted in between 20 to 70% .
2nd factor is the time which is directly affecting the cleaning result. If base metal is aluminium then use Metal Clean Bright concentration 10 to 30% for not more then 5 Minutes. For removal of rust stains on painted or iron surfaces, use 10–30% of Metal Clean Bright soultion for 15–20 minutes. And for heavily rusted and corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20–50%, for 15–40 minutes.
The 3rd important point always be noted, After cleaning of rust from Metal Clean Bright all area should be fully rinsed and clean properly with fresh water. And for best long time result to keep rust free surface, Surface can be chemically neutralized with RXSOL-41-8896-025 ( dilution ration 1 Ltr RXSOL-41-8896-025 with 10 Ltr water ). The scientific reason behind that is As With the Rust oxide gone with Metal Clean Bright, the metal surface is in direct contact with the acidic solution, and the corrosion reaction proceeds at a greater rate than it does at higher pH values. For increasing pH values greater than pH 10, the rusting rate seems to fall as pH is increased with help of RXSOL-41-8896-025.(http://www.rxmarine.com/Professional-Heavy-Duty-Alkaline-Cleaner)
Product:
Metalic Brightner Eco Rust Clean
- 3135 reads
RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products
Mail Us for any PRODUCT related information and purchase inquiry : rxmarinechemical@gmail.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarinechemical@gmail.com ( This mail is for supplier only )