Ballast Cleaner Disinfectant

Product Description | Product Application | Product Notes| Product DOSE

A 12% solution is widely used in waterworks for the chlorination of water and a 15% solution is more commonly used for disinfection of Ballast  water tank.  And addition of proper Ballast Cleaner Dis.

Description:

A 12% solution is widely used in waterworks for the chlorination of water and a 15% solution is more commonly used for disinfection of Ballast  water tank.  And addition of proper Ballast Cleaner Disinfectant into Ballast Tank makes super Disinfectant. RXSOL group developed such disinfectant and supplying world wide more then 30 country. And we have more then 180 satisfied customer for this specialized disinfectant. 

Code: RXSOL-23-3025-210

Other Equivalent Brand TG Ballastcleaner, Tsuruchlon

Short Description: High-test hypochlorite (HTH) is sold for chlorination of WATER

Generic Name: Ballast Water Disinfectant

Active Matter: 12 - 15%

Ballast Cleaner Disinfectant

Application:

Also used as a disinfectant and germicide , especially in the sterilization of water. It is also used for making wool unshrinkable and in the manufactire of chloroform. For.

• Also used as a disinfectant and germicide , especially in the sterilization of water.

• It is also used for making wool unshrinkable and in the manufactire of chloroform.

• For the purpose of disinfection and bleaching  , a weak soln. ( 1.2 % ) is used. For purifying water 0.02 to 0 .2 % volumetric is sufficientPotable Water Treatment

• Aquatics and Pools

• Odor Control/Corrosion Control

• Food & Beverage Processing

• Wastewater Treatment

• Cooling Towers, Inland Power Stations & Industry

• Irrigation Systems

• Agriculture/Farming
   

HANDLING AND STORAGE PRECAUTIONS:

Do not store adjacent to chemicals that may react if spillage occurs. Comply with Oman regulations, when shipped. If closed containers become heated, vent to release decomposition products (mainly oxygen under normal decomposition). Do not mix or contaminate with ammonia, hydrocarbons, acids, alcohol or ethers.

DO NOT REUSE CONTAINERS: Product residues may remain in containers. All labeled precautions MUST be observed. Dispose of container in a manner meeting government regulations.

PRODUCT DISPOSAL:  Product should be completely removed from containers. Material that cannot be used or chemically reprocessed should be disposed of, in a manner meeting government regulations.

Using Procedure:

A weak soln. ( 1.2 % ) is used. For purifying water 0.02 to 0 .2 % volumetric is sufficient for Potable Water Treatment SODIUM HYPOCHLORITE ACTIVE INGREDIENT:             Sodium Hypochlorite as Chlor.

A weak soln. ( 1.2 % ) is used. For purifying water
0.02 to 0 .2 % volumetric is sufficient for Potable Water Treatment

SODIUM HYPOCHLORITE

ACTIVE INGREDIENT:

            Sodium Hypochlorite as Chlorine                           : 15%

            Sodium Hydroxide                                                  :   1%

INERT INGREDIENTS:                                                      : 84%

             Total                                                                         100%           

 

General formulation to calculate  how much bleach is needed to add to a tank or a pipeline to disinfect it to a given chlorine residual using a given disinfectant. Usually someone wants to know how to meet an AWWA Standard (like C651-92, Disinfection of Water Mains). The equation below should be used to estimate the amount of sodium / Calcium hypochlorite (Chlorine Water is 6.00% sodium hypochlorite) needed to disinfect a given quantity of water to a desired chlorine concentration. 

req'd residual in ppm   Valume of hypo  =  volume of water  x  (  ----------------------------- )                                                                            1,000,000 x hypo %

For example , say you had installed a new 5,000 gallon tank and wanted to make sure that you had at least a 100 ppm solution of chlorine in it.

How much 6.00% Hypochlorite would you need to add  ?

• (5,000 gal x 100 ppm) / (1,000,000 x .06) = 8.33 gallons

How much 12% Hypochlorite solution would you need ?

• (5,000 gal x 100 ppm) / (1,000,000 x .12) = 4.17 gallons

If you use calcium hypochlorite (the white, powder version of chlorine, like HTH pool cleaner), the equation becomes:

req'd residual in PPM Wgt. of Calcium Hypo (lbs)= gal of water x 8.33 lb / gal m x   ( ----------------------------- )                                                                                                                1,000,000 x hypo %

• This is simply the previous equation multiplied by the conversion factor of 8.33 pounds per gallon of water.

Let's assume that we still need to disinfect 5,000 gallons at 100 ppm.

How many pounds of 65% calcium hypochlorite (HTH pool cleaner) are needed?

• (8.33 lbs/ gal. x 5,000 gal x 100 ppm) / (1,000,000 x .65) = 6.4 pounds

Note:

High-test hypochlorite (HTH) is sold for chlorination of swimming pools and contains approximately 30% calcium hypochlorite. The crystalline salt is also sold for the same use; this salt usually contains l.

High-test hypochlorite (HTH) is sold for chlorination of swimming pools and contains approximately 30% calcium hypochlorite. The crystalline salt is also sold for the same use; this salt usually contains less than 50% of calcium hypochlorite. However, the level of active chlorine may be much higher.

Note : Store in cool place

UN No :  1791
IMDG CLASS : 8

PACKING GROUP : III

ODOUR  : IRRITATING , PUNGENT ODOUR

R31: Contact with acids liberates toxic gases

R34: Causes burns

S-PHRASES

S1/2: Keep locked up and out of the reach of children.

S28: After contact with skin, wash immediately with plenty of water

S45: In case of accident or if you feel unwell, seek  medical advice (show the label where possible)

S50: Do not mix with acids

S50: Do not mix with reducing agents

X2: Restricted to professional users.Warning! Avoid exposure - obtain special instructions before use.

EMERGENCY AND FIRST AID PROCEDURES

EYE:

OBJECT IS TO FLUSH MATERIAL OUR IMMEDIATELY AND THEN SEEK MEDICAL ATTENTION IMMEDIATELY flush eyes with a directed stream of water at least 15 minutes while forcibly holding eye lids apart to ensure complete irrigation of all eye and lid tissue. Washing eyes within one (1) minute is essential to achieve maximum effectiveness. SEEK MEDICAL ATTENTION IMMEDIATELY.

SKIN:

SEEK MEDICAL ATTENTION IMMEDIAELY. Flush thoroughly with cold water under shower while removing contaminated clothing and shoes. CONTINUE TO FLUSH UNTIL MEDICAL ATTENTION ARRIVES. Discard non-rubber shoes. Wash clothing before reuse.

INIIALATION:

Remove to fresh air. If breathing is difficult, have trained person administer oxygen. If respiration stops, give mouth-to-mouth resuscitation. GET MEDICAL ATTENTION IMMEDIATELY.

INGESTION:

           NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. If swallowed, DO NOT INDUCE VOMITING. Give large quantities of milk or gelatin solution. If these are not available give large quantities of water. If vomiting occurs spontaneously, keep airway clear and give more milk, gelatin solution or water, GET MEDICAL ATTENTION IMMEDIATELY. Avoid vomiting, lavages or acidic antidotes. NOTE TO PHYSICIAN: Sodium Hypochlorite is an alkaline corrosive. For exposure by ingestion do not use emesis, lavages or acidic antidotes. Dilute immediately by giving milk, melted ice cream, beaten egg white, starch paste or antacids such as milk magnesia. Aluminum hydroxide gel or magnesium trisilicate gel. Avoid sodium bicarbonate because of  carbon di-oxide release. Sodium thiosulphate solution may prove beneficial by reducing unreacted material

Technical Specifications:

12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE

Parameters	Specification Range	Typical
Sodium Hypochlorite as NaOCl (%wt)	12.5 - 13.2	13.0
Available Chlorine (%wt)	11.9 - 12.6	12.4
Available Chlorine (%vol)	14.3 - 15.3	15.0
Available Chlorine grams/liter	143 - 153	150
Excess Caustic (%wt)	0.25 - 0.80	0.30
Specific Gravity @ 60°F	1.197 - 1.220	1.210
pH	12.0 - 13.0	12.50
Iron (Fe) ppm	<0.5	0.05
Nickel (Ni) ppm	<0.2	0.02
Copper (Cu) ppm	<0.2	0.05
Mercury (Hg) ppb	0.001 - 0.003	0.002
Sodium Chloride (NaCl)%	<15.0	12.5

Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.

Remarks:

Sodium Hypo Chlorite

Electrolysis Process ( Pure & Concentrated )
This is an improved version of this method, known as the Hooker process, In the process, sodium hypochlorite (NaClO) formed when chlorine is passed into cold and dilute sodium salt solution. It is prepared with minimal separation between the anode and the cathode .The solution must be kept below 40 °C (by cooling coils) to prevent the undesired formation of sodium chlorate and to keep chlorine concentration up to 15%.

Chloro Alkali process ( Chlorine value is less )

E. S. Smith patented a method of sodium hypochlorite production involving electrolysis of brine to produce sodium hydroxide and chlorine gas, which then mixed to form sodium hypochlorite. This is known as the chloralkali process. Both electric power and brine solution were in cheap supply at the time, and various enterprising marketers took advantage of the situation to satisfy the market's demand for sodium hypochlorite. Bottled solutions of sodium hypochlorite were sold under numerous trade names.

Bye Products ::: NEVER use this product as it contains hazardous mixture.

This is bye products of HEAVY / Metal industries. During treatment of main products, huge quantities of SOD. HYPO Chlorite produce, with mixture of many unwanted toxic impurities . This is completely waste of the plant , but sold by traders to satisfy market demands.

 

 

 

Sodium hypochlorite manufacturer, exporter and supplier in Mumbai, Surat Hazira, Gandhidham - Deen Dayal Upadhyay Kandla port, Mundra, Sikka - Jamnagar, Tuticorine, Chennai - Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia - Buz Buz, Paradip, Manglore, Fujairah, Sharjah, Dubai, Abu Dhabi, Ajman - UAE Middle East, Barka - Muscat, Oman, Canada

 

Packing Size: 220.00 Ltr.

Available Packing Size: 30, 60, 210, 1050 Ltr packing of sodium hypochlorite available.

Article News:

,

HASHTAG:

#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant

#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable

#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater

#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride