Anionic Polyacrylamide Flocculant
Anionic Polyacrylamide Flocculant Anionic Polyacrylamide Flocculant is an medium anionic charged polyelectrolyte to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.
Code: RXSOL-40-4160-050
Other Equivalent Brand
Magnafloc 5250, Anionic Flocculating Agent, Polyelectrolyte Jelly Powder Form
Short Description:
Polyacrylamide Flocculant to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.
Generic Name: Flocculating Agent Anionic Polyacrylamide
Active Matter: 100
Application:
It is used for effluent treatment of inorganic suspended solids found in chemical, Fishery, food, textile, dye, other effluent water, mining and coal washing waste water, metal processing, etc.
Using Procedure:
The dosage range of Anionic Polyacrylamide Flocculant Anionic Polyelectrolyte Powder varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for.
The dosage range of Anionic Polyacrylamide Flocculant Anionic Polyelectrolyte Powder varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage of Anionic Polyacrylamide Flocculant Anionic Polyelectrolyte Powder.
Jar Test: Put sample of effluent in a beaker and add Anionic Polyacrylamide Flocculant Powder as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.
Procedure and precautions upon dispersion and dissolving flocculants:-
Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.
Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
Dissolving concentration: Flocculants should be standardly be dissolved to 0.1-0.2% concentration. It is also effective to start dissolving at a slightly higher concentration, and then dilute the flocculant mixture immediately before use.
Note:
Handling measures and precautions : Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on s.
Handling measures and precautions :
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
Storage:
Technical Specifications:
Properties :
| Form | :Powder |
| Colour | :Off-white |
| Odour | :Odourless |
| Flash point | :Not applicable |
| Flammability | :Not flammable |
| Bulk density | :Approx. 750 kg/m3 |
| Self ignition | :Not self-igniting |
| Explosion hazard | :Not explosive |
| Fire promoting properties | :Not fire-propagating |
| Solubility in water | :Forms a viscous solution. |
Remarks:
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Mumbai, Kandla, Mundra, Kolkata, Howrah, Vishakhapatnam, Chennai, India.
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Fujairah, Dubai, Abu Dhabi, Sharjah, Ajman, UAE Middle East.
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Muscat Barka Oman.
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Nairobi Mombasa Kenya Africa, Canada.
#AnionicPolyacrylamideFlocculant
#Flocculant
#Polyacrylamide
#FlocculatingAgent
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Gulf, Yemen,UAE Middle East, Ruwi, Ghala, Muscat Barka Oman, Nairobi Kenya Africa, Mumbai, Kandla, Kolkata, Vishakhapatnam, Chennai, India, Canada, Nairobi Kenya, Sudan
Packing Size: 25.00 Kg.PWD
Available Packing Size: 25 Kgs
Article News:
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride