Acetamide 99% MSDS
| Product Name | RXSOL-60-6503-001 |
| Product Type | ACETAMIDE 99% |
| Revised date | 27-04-2019 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
3.1. Substance: ACETAMIDE 99%
Acetamide 99% Substance. Contains no other components or impurities which will influence the classification of the product.
2.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Classification : Carc. Cat. 3; R40
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Health hazards : Carcinogenicity - Category 2 - Warning (CLP : Carc. 2) H351
2.2. Label elements
Labelling EC 67/548 or EC 1999/45
Symbol(s) : Xn : Harmful
R Phrase(s) : R40 : Limited evidence of a carcinogenic effect.
S Phrase(s) : S2 : Keep out of the reach of children.
S36/37 : Wear suitable protective clothing and gloves.
Hazards pictogram:
Signal words : Warning
Hazard statements : H351 : Suspected of causing cancer.
Precautionary statements
• General : P102: Keep out of reach of children.
P103: Read label before use.
P101: If medical advice is needed, have product container or label at hand.
P201: Obtain special instructions before use.
• Prevention : P281: Use personal protective equipment as required.
• Response : P308+P313: If exposed or concerned : get medical advice.
• Storage : P405: Store locked up.
• Disposal considerations : P501: Dispose of this material and its container to hazardous
or special waste collection point, in accordance with local, regional, national and/or
international regulation
2.3. Other hazards
Other hazards : The substance does not fulfil the criteria to be identified as PBT substance or vPvB substance according to Annex XIII of Regulation REACH.
4.1. Description of first aid measures
First-aid measures after inhalation : Assure fresh air breathing. If breathing is difficult,
remove victim to fresh air and keep at rest in a position comfortable for breathing.
First-aid measures after skin contact : Wash with plenty of soap and water. Get
immediate medical advice/attention.
First-aid measures after eye contact : Rinse immediately with plenty of water. Get
medical advice/attention.
First-aid measures after ingestion : Rinse mouth out with water.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries after inhalation : May cause respiratory irritation.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
|
|
5.1. Extinguishing media
Suitable extinguishing media : Carbon dioxide. Dry powder. Foam. Water spray.
Unsuitable extinguishing media : Do not use extinguishing media containing water.
5.2. Special hazards arising from the substance or mixture
No additional information available
5.3. Advice for firefighters
Protection during firefighting : Do not enter fire area without proper protective
equipment, including respiratory protection.
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders : Equip cleanup crew with proper protection.
Ventilate area.
For non-emergency personnel : Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions : Prevent entry to sewers and public waters. Notify authorities
if product enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods : Soak up spills with inert solids, such as clay or diatomaceous earth as
soon as possible. Collect spillage. Store away from other materials.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Handling : Wash hands and other exposed areas with mild soap and water before eat,
drink or smoke and when leaving work. Obtain special instructions before use.
Technical protective measures : Provide good ventilation in process area to prevent
formation of vapour.
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep only in the original container in a cool, well ventilated place. Keep
container closed when not in use.
Storage - away from : Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s) : None.
8.1. Control parameters
No additional information available
8.2. Exposure controls
• Respiratory protection : Wear approved mask.
• Hand protection : Wear protective gloves.
• Eye protection : Chemical goggles or safety glasses.
• Others : When using, do not eat, drink or smoke
9.1. Information on basic physical and chemical properties
Physical state at 20 °C : Solid.
Odour : Mousy odor
Odour threshold : No data available.
pH value : No data available.
Melting point [°C] : 78 - 80 °C
Decomposition point [°C] : N/A
Critical temperature [°C] : N/A
Auto-ignition temperature [°C] : 5600C
Flammability (solid, gas) : N/A
Flash point [°C] : N/A
Boiling point [°C] : 221 °C
Initial boiling point [°C] : N/A
Final boiling point [°C] : N/A
Evaporation rate : N/A
Vapour pressure [20°C] : N/A
Vapour pressure mm/Hg : N/A
Vapour density : N/A
Density [g/cm3] : 1,16
Relative density, gas (air=1) : N/A
Relative density, liquid (water=1) : N/A
Solubility in water [% weight] : 1 g/500 mg water
Solubility in water : N/A
Log Pow octanol / water at 20°C : No data available.
Solubility : N/A
Viscosity at 40°C [mm2/s] : N/A
9.2. Other information
Explosive properties : N/A
Explosion limits - upper [%] : N/A
Explosion limits - lower [%] : N/A
Oxidising properties : No data available.
10.1. Reactivity
Reactivity : Not established.
10.2. Chemical stability
Chemical stability : Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions : Not established.
10.4. Conditions to avoid
Conditions to avoid : Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid : Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products : Fumes. Carbon monoxide. Carbon dioxide
11.1. Information on toxicological effects
Acute toxicity
• Inhalation : Based on available data, the classification criteria are not met.
• Dermal : Based on available data, the classification criteria are not met.
• Ingestion : Based on available data, the classification criteria are not met.
Corrosion : Based on available data, the classification criteria are not met.
Irritation : Based on available data, the classification criteria are not met.
Sensitization : Based on available data, the classification criteria are not met.
Mutagenicity : Based on available data, the classification criteria are not met.
Carcinogenicity : Suspected of causing cancer.
Toxic for reproduction : Based on available data, the classification criteria are not met.
STOT-single exposure : Based on available data, the classification criteria are not met.
STOT-repeated exposure : Based on available data, the classification criteria are not met.
Aspiration hazard : Based on available data, the classification criteria are not met.
12.1. Toxicity
Toxicity information : Not established.
12.2. Persistence - degradability
Persistence - degradability : Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential : Not established.
12.4. Mobility in soil
Mobility in soil : Not established
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment : The substance does not fulfil the criteria to be
identified as PBT substance or vPvB substance according to Annex XIII of Regulation
REACH.
12.6. Other adverse effects
Environmental precautions : Avoid release to the environment
13.1. Waste treatment methods
General : Avoid release to the environment. Dispose in a safe manner in accordance with local/national regulations. Dispose of this material and its container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
Not regulated.
15.1. Safety, health and environmental regulations/legislation specific for the
substance or mixture
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to
restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject to
authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Product:
TAGS