HCF remover plays very important role to make SHIP TANKS gas free, after Hydrocarbon Cleaning Process. Hydrocarbon Free Tank cleaning agent helps to removes all types of Hydrocarbon traces which is used during hydrocarbon tank cleaning operation. NEUTRAL HCF CLEANER is suitable to use on zinc-silicate coatings, ferrous alloys, tin, zinc, aluminum and galvanized surfaces. During Tank clenaing operation on epoxy tanks HCF remover only can be apply after dilution. Apply the product, after hydrocarbon cleaning processes, to achieve Gas–Free results.
We are distributing and supplying Hydrocarbon Free Neutral HCF to shipchandler, Shipping Companies, Shipping Agent of Kandla, Sikka, Mundra, Mumbai, JNPT, Manglore, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah - Sharjah, Abudhabi, Dubai.
Email us for HCF Remover inquiry : mail@rxmarine.com
Available packing of Hydrocarbon Free HCF cleaner is 25, 50, 210 Ltrs
Hydrocarbon Free Tank cleaning agent helps to removes all types of Hydrocarbon traces which is used during hydrocarbon tank cleaning operation. And HCF remover is chemically pH balanced Neutral Materials, so its importance also increases when ALKALINE based materials are restricted. In general during ship tank cleaning operation where cargo is Vegetable, Animal Fat and Oil, light mineral oil etc HCF remover plays very important role as its formulation is completely free from alkaline materaials as well as HCF removers doesn't contains hydrocarbon solvent, Chloride, Sulfide etc... So after cleaning of ship tanks from HCF - Hydrocarbon Free cleaner, ship tanks can be declare to load pure chemicals.
We are distributing and supplying Hydrocarbon Free Neutral HCF to shipchandler, Shipping Companies, Shipping Agent of Kandla, Sikka, Mundra, Mumbai, JNPT, Manglore, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah - Sharjah, Abudhabi, Dubai.
Email us for HCF Remover inquiry : mail@rxmarine.com
Available packing of Hydrocarbon Free HCF cleaner is 25, 50, 210 Ltrs
COLD water is recommended for drying or semi-drying oils to flush the tank as prewash. Chemical expert suggest that cold water should be carried out immediately after discharge of cargo to prevent hardening of oil residues. Otherwise if oil is nondrying then Prewash of the tank with hot water at 50˚C is good decision to achieve BEST cleaning result.
Question : How to clean veg oil ?
Answer : Following step can be follows to clean VEG OIL...
Step 1
Don't expose empty tank in air. Try to keep cool temperature inside the tank. Remove any remaining oil residue by gravitational and manual stripping, If possible Dampen a soft, clean cloth or rag under cool to room temperature water. Wring the cloth. The cloth should be damp, not dripping wet.
Step 2
If posible Lay the dampened cloth over the vegetable oil. Push downward to absorb as much oil as possible. Do not rub or wipe the oil. Lift the cloth.
Step 3
Spray and Sprinkle Hydrocarbon Remover HCF over any remaining vegetable oil. HCF cleaner will emulsify the oil, Allow the product to complete reaction for approximately an hour.
Step 4
Then follow genreal tank cleaning manual of SHIP. Common addopted method for tank cleaning is as follows :::
Spraying Method:-
Using HCF as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
**Make sure to take all safety precautions are followed when handling / spraying HCF**
Re-circulation Method:–
Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and HCF to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
* Use a strainer at the pump stack when circulating any solution.*
Cargo hold cleaning
For heavily soiled areas, a preliminary cleaning is required. If surface is heavily contaminated, higher concentrations of the product in water can be used. When used for spot cleaning, apply by hand spraying neat or prepare a 20% solution, and allow solution to penetrate soil for about 30 minutes before rinsing off with water. Always wash off before chemicals dry on the surface.
Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.
Estimation of total dissolved solids in water:
Requirements: Glass and plastic beaker Spirit lamp
Funnel and filter paper Boiling chips
Procedure:
. Filter the sample water.
. Weigh the glass beaker W1 g
. Take 50 mL of sample water in the glass beaker.
. Evaporate the water carefully until the glass beaker becomes dry.
. Cool and weigh the glass beaker with the boiling chips again, W2 g.
Calculation: Total solid (ppm) = (W1 – W2) x 2 x 104 Filterable residue:
Procedure:
. Weigh the empty glass beaker with boiling chips, W1 g.
. Filter the sample water into a plastic beaker.
. Pour 50 mL of filtered water into the glass beaker.
. Evaporate the water carefully until the glass beaker becomes dry.
. Cool and weigh the glass beaker with the boiling chips again, W2 g.
Calculation:
Filterable residue (ppm) (W2 – W1) x 2 x 104
Non-filterable residue (ppm) = total solid – filterable residue.
In plant area of Industries like railway, Airplane, Marine, Rigs - Oil filed, Printing, Lubricating etc... Oil, grease, carbon and many soiled areas always come in contact with working personnel. It's cleaning from hand becomes easy by uses of 2 - 5 gram of RXSOL-1001.
RXSOL-1001 easily dissolves and make soft any greasy soiled materials from HAND. Its uses are also very simple and directly can be wipe through cotton / Paper. And its uses is non-hazardous, Non-flammable in surrounding area.
STOCK point : Mumbai, Navi Mumbai, Surat, Kandla - Gandhidham, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia - INDIA
Fujairah, Dubai, Sharjah - Middle East
For India - mail@rxmarine.com
For Middle East - dubichem@rxmarine.com
Bitumen is a viscous residue of Petroleum Product. Its higher viscosity strength creates a big problem in personnel. Bitumen can be dissolved easily in a solvent like MTO, Kerosene etc... But after using such solvent hand becomes dry as petroleum solvent drains our Body Oil. And uses of Kerosene-like materials are also having a fire risk.
Our Waterless Hand cleaner RXSOL-1001 plays an important role for such cleaning, And its Glycerine based formula keeps skin soft and normal. RXSOL waterless hand cleaner paste comes in 250 Gram, 500 Gram, 1 Kg, 4, 5, 20, 50 Kg Jars. Its handling is also easy and can be carried out in a pocket.
In normal practice, 1 Person who is working in Bitume sector ( for making Bitumen Emulsion, Blowing of Bitumen and many more ) can consume minimum 5 Ltr Kerosene in a Month. While same person cleaning problem can be handled by 1 Kg Waterless Hand cleaner, which will cost less and storage of Hand cleaner is not risky against fire, while 5 Ltr Kerosene can spread fire in the surrounding.
Selection of Waterless Hand Cleaner is a wise decision for working environment, And cost effective also. At present 1 Kg, RXSOL waterless hand cleaning gel will cost 99 INR / Kg + GST
Largest supplier of Waterless Hand cleaner in Mumbai, Kandla, Surat, Chennai - Ennore, Visakhapatnam - Vizag, Kolkata, Haldia, Paradip.
Bitumen is a viscous residue of Petroleum Product. Its higher viscosity strength creates a big problem in personnel. Bitumen can be dissolved easily in a solvent like MTO, Kerosene etc... But after using such solvent hand becomes dry as petroleum solvent drains our Body Oil. And uses of Kerosene-like materials are also having a fire risk.
Our Waterless Hand cleaner RXSOL-1001 plays an important role for such cleaning, And its Glycerine based formula keeps skin soft and normal. RXSOL waterless hand cleaner paste comes in 250 Gram, 500 Gram, 1 Kg, 4, 5, 20, 50 Kg Jars. Its handling is also easy and can be carried out in a pocket.
In normal practice, 1 Person who is working in Bitume sector ( for making Bitumen Emulsion, Blowing of Bitumen and many more ) can consume minimum 5 Ltr Kerosene in a Month. While same person cleaning problem can be handled by 1 Kg Waterless Hand cleaner, which will cost less and storage of Hand cleaner is not risky against fire, while 5 Ltr Kerosene can spread fire in the surrounding.
Selection of Waterless Hand Cleaner is a wise decision for working environment, And cost effective also. At present 1 Kg, RXSOL waterless hand cleaning gel will cost 99 INR / Kg + GST
Largest supplier of Waterless Hand cleaner in Mumbai, Kandla, Surat, Chennai - Ennore, Visakhapatnam - Vizag, Kolkata, Haldia, Paradip.
Yes, it is 100% safe. Hand cleaner is prepared keeping the hardness very low so that it is not harmful to skin.