Browse : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z  
Featured Products 

pH Booster Morpholine Base

Product Description | Product Application | Product Notes| Product DOSE
RXSOL pH Boosters are liquid  alkaline formulation,used as alkalinity source for boiler feed water. It is synergized with properties of pH boosting and water conditioning. Morpholine have unique pH [+] Read More...
Code:
RXSOL-40-5024-020
Other Equivalent Brand
Short Description:
RXSOL pH Boosters are morpholine based alkaline formulation,used as alkalinity source for boiler feed water. It is synergized with properties of pH boosting and water conditioning.
Generic Name:
Boiler Alkaline Controller
Active Matter:
60 - 63
pH Booster Morpholine Base
Application:
RXSOL-40-5024-020 have antiscalant property  which will help to formation of scale inside the boiler. This makes it profitable for users by savings of power and labor, and increase in production.  As [+] Read More...
Using Procedure:
RXSOL  pH Boosters are dosed depending upon the feed water characteristic and alkalinity requirement. It is compatible with all other treatment chemicals. It is dosed exactly as per the dosage rate and metho [+] Read More...
Note:
Key Features & Benefits:- Minimizes corrosion of feed water tank, lines and pump Imparts water and sludge conditioning to minimize scaling and deposition Compatible with other treatment Chmicals Com [+] Read More...
Technical Specifications:

 

Properties Unit Typical Value
Form and Appearance - Clear Colorless Liquid
Odor - Characteristic
pH (neat) pH Alkaline
Solubility - Completely Soluble in Water
Remarks:

STORAGE & HANDLING

pH booster should be stored in an air tight container away from direct heat.
Always store at cool & dry place.
Handle using goggles & do not breathe in the vapours.
Wash thoroughly in case of contact. Do not swallow.

 

pH Control

Maintenance of proper pH throughout the boiler feedwater, boiler, and condensate systems is essential for corrosion control. Most low-pressure boiler system operators monitor boiler water alkalinity because it correlates very closely with pH, while most feedwater, condensate, and high-pressure boiler water requires direct monitoring of pH. Control of pH is important for the following reasons:

  • corrosion rates of metals used in boiler systems are sensitive to variations in pH
  • low pH or insufficient alkalinity can result in corrosive acidic attack
  • high pH or excess alkalinity can result in caustic gouging/cracking and foaming, with resultant carryover
  • speed of oxygen scavenging reactions is highly dependent on pH levels

The pH or alkalinity level maintained in a boiler system depends on many factors, such as sys-tem pressure, system metals, feedwater quality, and type of chemical treatment applied.

The corrosion rate of carbon steel at feedwater temperatures approaches a minimum value in the pH range of 9.2-9.6 . It is important to monitor the feedwater system for corrosion by means of iron and copper testing. For systems with sodium zeolite or hot lime softened makeup, pH adjustment may not be necessary. In systems that use deionized water makeup, small amounts of caustic soda or neutralizing amines, such as morpholine and cyclohexylamine, can be used.

In the boiler, either high or low pH increases the corrosion rates of mild steelThe pH or alkalinity that is maintained depends on the pressure, makeup water characteristics, chemical treatment, and other factors specific to the system.

The best pH for protection of copper alloys is somewhat lower than the optimum level for carbon steel. For systems that contain both metals, the condensate and feedwater pH is often maintained between 8.8 and 9.2 for corrosion protection of both metals. The optimum pH varies from system to system and depends on many factors, including the alloy used 

To elevate pH, neutralizing amines should be used instead of ammonia, which (especially in the presence of oxygen) accelerates copper alloy corrosion rates. Also, amines form protective films on copper oxide surfaces that inhibit corrosion.

Hydrazine Hydrate (50 ~ 51% as N2H4);

50 ~ 51% as N2H4 solution, Chloride less than 0.1% as NaCL, For corrosion protection in boilers.


Activated Hydrazine (34 ~ 35% as N2H4).
34 ~ 35% as N2H4, Chloride less than 0.1% as NaCl, Catalyzed Hydrazine solution for corrosion Pr and related equipment.


Morpholine (C4H9NO).
Technical Grade for Boiler Water Treatment. Purity Not less than 99%.


Acid Inhibitor.
For the suppression of Hydrochloric Acid attack on Ferrous alloys, Cuprous alloys and Titanium alloys, effec up to 94°C with efficiency not less than 75% in 5% HCI solution and Acid Inhibitor concentration 2%.


Ammonia 25% (NH4OH).
25% as ammonium Hydroxide used high pressure Boiler water treatment.
It is a clear colorless liquid.
PH 11-12 @ 20 °C.
Density 0.9 g/cm3.
Chloride (CL) 0.002 mg/liter maximum.
Iron (Fe) 0.002 mg/liter maximum.


Hardness Stabilizer (POC 3000) :
Polyacrylate material of low molecular weight.
Non-volatile used for scale inhibition in sea water treatment.
The product is miscible with water in all proportions. And is clear Liquid.
PH valve 5-7.
Density @ 20°C Approx. 40%.
Chemical Characterization Sodium Polyacrylate, Modified, Aqueous solution.
Solidification temperature -20°C.
Flash point >100°C.
Ignition temperature >200°C.

Hardness Stabilizer: Chemically modified Polycarboxylate material of low molecular weight and is non-volatile. Used for scale inhibition in seawater treatment and as dispersing agent. Prevents formation of deposits caused by Calcium carbonate, Magnesium hydroxide, Calcium sulphate or Barium sulphate. Suitable for all applications in which stabilization of hardness and prevention of crust formation is required. Appearance : Clear Liquid,Density (g / cm3) @ 20 Degree Celsius : > 1 , pH @ 20 Degree Celsius 5 - 7 , Viscosity (mPa.s) @ 20 Degree Celsius : less than 120 ,Solid Content : Approx. 40% ,Water solubility: Completely soluble, Chemical characterization: Sodium Polyacrylate, modified,aqueous solution.

#POC3000manufacturerKUWAIT

#POC3000supplierKUWAIT

#POC3000manufacturerUAE

#POC3000manufacturerOMAN

pH Booster Morpholine Base manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of pH Booster Morpholine Base at a competitive price from us. We have ready stock of pH Booster Morpholine Base in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

pH Booster Morpholine Base
:
Packing Size:
25.00 Ltr.
Available Packing Size:
25 Kgs. 50 Kgs.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : mail@rxmarine.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarine@gmail.com ( This mail is for supplier only )