Emulsion Sludge Breaker

Product Description | Product Application | Product Notes| Product DOSE

Degreaser with unique feature that dissociates slop to separate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker "C" cleaners.

Code: RXSOL-20-2006-210

Other Equivalent Brand

Breaker/WWT, Chembreak, Careclean Quick Spilt, Desludger Chemical, Emulsion Breaker 210 Ltr, SEA SHIELD CLEAR BREAK 79103

Short Description:

Unique feature that dissociates slop to seperate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker "C" cleaners.

Generic Name: Demulsifier to break sludge oil and tight emulsion into Oil and Water

Active Matter: 85 - 88 %

IMPA Code: 551066, 550167, 551331

Emulsion Sludge Breaker

Application:

Ideally suited for slop tanks. Also recommended for local cleaning & degreasing of engine rooms, bilges & tank tops. Low toxicity, non - corrosive. Highly effective, economical solvent cleaner. Slu.

Ideally suited for slop tanks. Also recommended for local cleaning & degreasing of engine rooms, bilges & tank tops. Low toxicity, non - corrosive. Highly effective, economical solvent cleaner.

Sludge Breaker manufacturer and sludge breaker supplier in Mumbai, gandhidham, Chennai, Visakhapatnam, Kakinada, Manglore, Goa, Kolkata, Haldia, Paradip, fujirah, Dubai, Sharjah, UAE, middle East. 

Using Procedure:

RXSOL-20-2006-210 is fast acting demulsifier that is formulated specially to break sludge oil and tight emulsion.

Note:

Sludge Breaker  soften and break down heavy oils, tar and asphalt sludge deposits and waxing Agent. Also can be used as  all purpose degreaser  emulsifiers, Specially designed  for engine room and cargo  ta.

Sludge Breaker  soften and break down heavy oils, tar and asphalt sludge deposits and waxing Agent. Also can be used as  all purpose degreaser  emulsifiers, Specially designed  for engine room and cargo  tank cleaning . Main feature of RXSOL-20-2006-025 is, it finally dissociate slop emulsion  to separate oil and water.This provide us with ability to dispose of waste solution as per MARPOL & IMO rules and regulation 

Technical Specifications:

 

Remarks:

For light contamination dilute with water in the ratio 1:20 . For medium contamination dilute with a petrosolvent. And for heavy contamination concentrated RXSOL-20-2006-0210  is suggested.

For Engine Room & Cargo Tank Cleaner

Dosage:- Dose rate and results will vary depending on amount of contamination . For light contamination dilution with water up to 1:20 is recommended where as medium contamination dilution with Petro solvent , And for heavy contamination neat RXSOL CB 2006 is suggested to use.

Procedure of use :- RXSOL-20-2006-025 is  recommended for local cleaning & degreasing of engine rooms, bilges & tank  tops. It may be applied by brush, spray, immersion, soaking, or  any  other  conventional  means.RXSOL-20-2006-025 is used  neat. Allow a residence time of at least 20- 45 minutes where  possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure.The emulsion residue after cleaning must be allowed  to separate  in a holding tank for atleast 3-5 hours before passing through an oily water separator.

Tank Cleaning after Mineral Oils/ Lube Oils / Slope-Black Oil
1 ) Fill the tank with 1-35 litres per ton wash water.Best results are obtained when water is heated to a   temperature  between  65°C & 80°C  then  stripped  constantly and transferred  to a holding  tank  for  separation.The time for this will vary depending on amount of RXSOL-20-2006-025  used & nature of oil being cleaned.Generally,12 hours should be sufficient before the water phase can be removed.
2) Direct Cleaning.Spray directly RXSOL-20-2006-025 on tank surfaces to be cleaned, left  for at least 30  minutes.Finally wash with hydrogating (high pressure) machine. Hot water between 50°C & 80°C recommended.

SLUDGE BREAKER TANK CLEANING CHEMICAL PRODUCTS

#Chem_Break
#Sludge_Breaker
#ChemicalSludge_Cleaner
#Sludge_ChemBreakDubaiMuscatMumbai

Emulsion Sludge Breaker manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Emulsion Sludge Breaker at a competitive price from us. We have ready stock of Emulsion Sludge Breaker in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

#TANKcleaner_supplierFUJAIRAH
#tankcleaner_UAE
#tankcleaner_oman
#TANKcleaningDETERGENT_dubai

Packing Size: 210.00 Ltr.

Available Packing Size:

Demulsifier to break sludge oil and tight emulsion into Oil and Water. Sludge Breaker available in 20 ltr., 25 ltr, 50 Ltr, 210 Ltr, and 1000 Ltr IBC TANK.

Article News:

,

HASHTAG:

#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant

#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable

#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater

#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride