Foundry Ind Chemicals-54

One Shot Universal Liquitreat 100

Product Description | Product Application | Product Notes| Product DOSE
Boiler Water treatment specialized is a well - balanced blend for boiler water treatment products, Resulting in a scale and corrosion control by one shot operation. A one-step treatment to control the [+] Read More...
Code:
RXSOL-50-5001-025
Other Equivalent Brand

RXSOL BWT LIQUID PLUS, Care Treat 3 Boiler 2, Drew Ameroid, Arboiler WT, BWT 104P Nor chem, B.W.T. NEW FORMULA EQUAL TO DREW - AGK 100, DM-511, EAZY BWT-1, MAXTREAT-3222, ONE SHOT BWT 25 Ltr

Short Description:
A one-step and one SHOT treatment to control the formation of rust and scale in boilers. Contains alkaline compounds, scale and corrosion inhibitors, oxygen scavengers and sludge conditioners
Generic Name:
BOILER scale and corrosion control by one shot operation
Active Matter:
54-60
Add to Compare
|
Compare Now
Video not available
One Shot Universal Liquitreat 100
Application:
The dosage rate is dependent on bioler operating condition, feed 2-3 ltrs of RXSOL-50-5001-025 solution for per thousand ltr of bioler water then control the system by periodic Alkalinity test procedu [+] Read More...
Using Procedure:
Control is by simple  boiler water tests or RX CLEANSERS  can provide a suitable test  kits for this purpose. Used in low pressure and auxillary boilers :::::::::::::::::::::Alkalinity  TEST FOR BOILER & [+] Read More...
Note:
Technical Specifications:

Boiler Water Treatment products

CHARACTERISTIC :

  • Convenient liquid treatment, which provides the basic alkalinity on which successful water treatment depends.
  • Provides optimum conditions for hardness control to function.
  • Neutralizes acid conditions.
  • Will assist in keeping silica in suspension.
  • Simple test to determine level of treatment.
  • Can be used in boilers of all pressures.
  • Can be used as a neutralizer after acid cleaning operations
  • Suitable for use with all auxiliary boilers; waste heat units; economizers, package boilers, smoke and water tube boilers.
  • Dispersant action suspends sludge and sediment particles for efficient blow down.
  • Oxygen scavenging for optimum protection.
  • Protects boiler, steam lines, condensate lines and feed water lines from corrosion.
  • Fast action due to catalyst.
  • Simple test to determine level of treatment.
Remarks:

Basic Boiler System Schematic

Below is a summary of problems associated with the common impurities in water and solutions to each problem.

List Of Problems Caused By Impurities In Water

Impurity (Chemical Formula)

Problems

Common Chemical Treatment Methods

Alkalinity (HCO3-, CO32- and CaCO3)

Carryover of feedwater into steam, produce CO2 in steam leading to formation of carbonic acid (acid attack)

Neutralizing amines, filming amines, combination of both, and lime-soda.

Hardness (calcium and magnesium salts, CaCO3)

Primary source of scale in heat exchange equipment

Lime softening, phosphate, chelates and polymers

Iron (Fe3+ and Fe2+)

Causes boiler and water line deposits

Phosphate, chelates and polymers

Oxygen (O2)

Corrosion of water lines, boiler, return lines, heat exchanger equipments, etc. (oxygen attack)

Oxygen scavengers, filming amines and deaeration

pH

Corrosion occurs when pH drops below 8.5

pH can be lowered by addition of acids and increased by addition of alkalies

Hydrogen Sulfide (H2S)

Corrosion

Chlorination

Silica (SiO2)

Scale in boilers and cooling water systems

Lime softening

Chemical feed should be continuous. Chemical pumping rates can create problems especially for neat feed set ups. Using on/off feed systems such as a recycle timer can create problems. Chemical feed pumps should be sized or product strengths should be adjusted to allow continuous feed.

Steam and carbon dioxide leave continuously, so setting up a neutralizing amine pump to feed intermittently can lead to wide variations in condensate pH control. If sampling is done from a condensate receiver, the tank volume may buffer the variations and the changes may not be noticed, but corrosion could be occurring to areas of the piping that see the rapidly changing pH.


If polymeric dispersants, phosphonates, phosphate, or chelants are fed intermittently into the feedwater using a recycle timer, and the amines are not fed continuously, a cycle of iron slugs returning in the condensate can be followed by slugs of high dispersancy cleaning of the iron from the deaerator and dragging it into the boiler.

Load changes can affect chemical concentrations when the chemical feed is base fed. Example: Steam production of one million lbs./day; 4% blowdown; 20% active boiler polymer product fed at 5 pounds per day. The calculated daily average polymer concentration would be 24 ppm. Assume peak plant production load is 60,000 lbs./hr., but during the overnight hours the load is only 5,000 lbs./hr. If the dispersant is being fed continuously over the 24 hours, during the 8- hour low load period, the boiler polymer concentration would have increased to over 200 ppm. Upon high fire when production resumes, carryover is very possible because of over concentrating the polymeric dispersant.

Chemical feed needs to be paced to steam production, especially where significant load changes occur.

Carbon dioxide can concentrate in steam and condensate making neutralizing amine treatment impractical. Carbon dioxide levels can be relatively low in steam exiting a boiler at only a few ppm, but if there are areas where it becomes “trapped” and can accumulate, concentrations can reach extremely high levels into the hundreds or even thousands of ppm.

CO2 is a non-condensable gas. It has a distribution ratio in the steam piping and condenses at points throughout the system. At the boiling point, the solubility of the gas in water is extremely low. The solubility of the CO2 is actually lower in the condensate than it is in the steam. For the CO2 to escape from the steam into the water it will accumulate in the steam space just above the water level until the partial pressure becomes high enough for the CO2 in the incoming steam to be able to exit into the condensate. This creates a steady state condition of CO2 coming in and exiting, but an area of severe localized corrosion occurs where the carbon dioxide concentration is high.

The highest CO2 concentration normally occurs just above the condensate water level. If there is an area where condensation is occurring and running down pipes or the sides of vessels, the CO2 concentration will be very high and the pH will be about 5.3 – 5.5 in that location creating high corrosion rates.


The solubility of CO2 increases dramatically as the condensate temperature falls below 212 °F. When there is an accumulation of CO2 in an area and the condensate temperature is relatively low, the amount of carbon dioxide going into solution will be extremely high. Where low-pressure steam is used that contains CO2 and the heat exchange process has relatively close temperature differentials between the steam and the condensate, there is potential for high uptake of the CO2 into the condensate and localized low pH.

Neutralizing amines are selected in an effort to condense in the right concentrations to carbon dioxide condensation levels throughout the steam system. Neutralizing amines cannot control corrosion where this localized accumulation of carbon dioxide occurs since the high CO2 overwhelms the demand for the amine. Even point source addition of amine may not be able to satisfy the demand.

Where the concentrating effect of CO2 occurs, methods of reducing the problem include eliminating or minimizing CO2 in the steam, venting off the CO2 in the localized area, eliminating condensate in the area, applying a filming amine or metal passivator, or using higher temperature steam and increasing condensate temperature to reduce the CO2 content in the condensate.

#BoilerWaterTreatmentCHEMICAL_supplierDUBAI
#BoilerWaterTreatmentCHEMICAL_supplierMUSCAT
#BoilerWaterTreatmentCHEMICAL_supplierMUMBAI
#BoilerWaterTreatmentCHEMICAL_supplierNAIROBI

A one-step and one SHOT treatment to control the formation of rust and scale in boilers. Contains alkaline compounds, scale and corrosion inhibitors, oxygen scavengers and sludge conditioners. which resulting in a scale and corrosion control by one shot operation.

Boiler water treatment speacialized chemical products One Shot Universal Liquitreat  Exporter, manufacturer, supplier in Mumbai, Gandhidham - Kandla, Mundra, Sikka, Surat, Kolkata - Haldia, Buz Buj, Paradip, Visakhapatnam - Gangavaram, Fujairah, Dubai, Sharjah, Abu Dhabi, Ruwi Barka Muscat Sohar, Oman, Sudan, Yemen, Nairobi Kenya

BOILER WATER TREATMENT chemicals manufacturer and supplier in INDIA, MUSCAT OMAN, UAE DUBAI, Nairobi

One Shot Universal Liquitreat 100
One Shot Universal Liquitreat 100
One Shot Universal Liquitreat 100
:
Packing Size:
25.00 Ltr.
Available Packing Size:
ONE SHOT Boiler water treatment chemical products to control scale and corrosion inhibitors, oxygen scavengers, and sludge conditioners available in 25, 50, 210 Ltr HMHDPE Barrel.
Article News:
Boiler Maintenance Chemicals, Sodium Hexametaphosphate to precipitate calcium in low-pressure boilers, Chelant Treatment for Boiler, Boiler Treatment tips, Marine Chemicals supplier, Why Marine Chemicals?, Boiler and Cooling Water treatment chemical manufacturer and supplier, Vaptreat Liquid Evaporator Treatment chemicals, Manufacturer Of Water Treatment Chemicals, Water Treatment Raw Materials, BKC, Disinfectants, Boiler Sludge Conditioner Supplier in MIDC, Mumbai and Pawana ,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Sodium Silicate Water Glass

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-81-8107-280
Other Equivalent Brand

Sodium Silicate

Short Description:
We supply both Neutral & Alkaline sodium silicate absolute transparent quality i.e. water white.
Generic Name:
Water Glass or Soluble Glass
Add to Compare
|
Compare Now
Video not available
Sodium Silicate Water Glass
Application:
Silica gel production Builder or anti-soil-redeposition agent for detergent Peroxide stabilizer in bleaching for textile and pulp Solubilizer in ink, flux binder for welding rods Deflocculant for [+] Read More...
Using Procedure:
  Sodium Silicate is a compound mixture of sodium oxide i.e. Na2o with silica sand i.e. Sio2 with water. Sodium silicate is also called water glass. There are two process to manufacture liquid [+] Read More...
Note:
PRODUCT IDENTIFICATION CAS NO.  ....... .1344-09-8  EINECS NO... .215-687-4 FORMULA ...... 2Na2O.SiO2 MOL WT.  ........184.04 H.S.CODE....... 2839.19   SODIUM METASILICATE (5H2O) Sodium Metasil [+] Read More...
Technical Specifications:

TESTING PROCEDURE :::
ANLYSIS PROCEDEURE OF SODIUM SILICATE : Take 5gm of sodium dilute it to 250ml in SMF with dist. Water , take 50 ml of the diluted solution add 2-4 drops of  methyl red indicator.  Then titrate it against IN {approx.}  HCL  Light Pink is the end point. Take this reading as “A” ml. To this solution add 5 gm of sodium fluoride dissolve properly add  6-7 drops of methyl red indicator titrate against IN HCL  appearance of slight pink colour is the end point . Take this reading as “B” ml 

 

CALCULATION For Na2O
 

“A”ml  x 3.1 x normality of HCl   = C%

               Wt. Of sample 


For  Sio2
 

“B”ml  x 15.02 x normality of HCl 

           Wt. Of sample X 10 

 

Ratio of sodium silicate 

 

% of SiO2          i.e               D%

% of Na2o                          C%

 

Viscosity-  AS PER IS 3944 B4 CUP 

 

DETERMINATION OF IRON (as per Fe)

  • Botanic Potassium Thiocynate ;- dissolve 1.0gm of potassium thiocynate in10ml of water. Add sufficient n-butano to makeup to 100ml. Shake vigorously until the solution is clear.
  • Dilute H2SO4 :- approx.10% 
  • Standard Iron solution : weight 0.702gm of Ferrus Ammonium sulfate. Dissolve in 10ml dilute H2SO4 then make up 1000ml with water. Transfer 10 ml of this solution in 100ml M.Flask and make up 100ml with water. 1ml of this solution is equivalent to 0.01mg of iron 

 

PRCEDURE :

  • Sample Reading: take about 5gm of the sample accurately weighted. Dissolve it in distilled water and make the solution exactly 100ml. Take 10 ml of this solution add 1ml concentrated Nitric acid. Boil the solution and cool. Then transfer it into a nessler cylinder and add 30mg of Ammonium Persulfate and 15 ml of Botanic Potassium Thiocynate solution. Shake for 30 sec and allow the liquid to separate.
  • Blank reading : take 10 ml distilled water. Add 1ml concentrated Nitric acid boil the solution and cool. Then transfer it into a nesseler cylinder and add 30 mg of Ammonium Persulfate and 15 ml of Botanic Potassium Thiocynate solution . Shake for 30 sec. And allow the liquid to separate. Then add Standard Iron Solution until the colour of Butanol Layers in Both Cylinder (Sample & Blank) 
    CALCULATION :

Iron as Fe (%w)  =  0.001 V

                                     W

Where, 

V= Volume in ml of Standard Iron Solution to add in Blank Reading

W= Weight in gm of sample 

 

 

 

 

Remarks:

Sodium Silicate Liquid Neutral, Sodium Silicate Liquid Alkaline & Sodium Silicate Powder Neutral Manufacturer. We also keeping ready stock of these materials...
Sodium Silicate Liquid Neutral

Sodium Silicate Liquid Alkaline
Sodium Silicate Powder Neutral
Sodium Silicate Powder Alkaline
Sodium Silicate Glass Neutral
Sodium Silicate Glass Alkaline
Silica Gel
Sodium Silicate
Activated Carbon
Sodium Metasilicate
Silicate Chemicals

We are manufacturing and exporting a broad range of  sodium silicate including Activated Carbon, Sodium Metasilicate and Sodium Silicate Glass Neutral. These products are used in Laundry soap, Detergent, Cement, Casting, Precept silica, Zeolite, Construction chemicals, Electrodes, Silica Gel, Oilfield chemicals, Paper making, Paper cones, tubes, Paints, Pigments and Foundry fluxes. 

Our manufacturing unit is situated in Gujarat India.  We are exporting our products in the international market successfully in Netherlands, Iraq, Malaysia, Saudi Arabia and UAE, Dammam, Gulf, and Africa.

Sodium Silicate Water Glass manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Sodium Silicate Water Glass at a competitive price from us. We have ready stock of Sodium Silicate Water Glass in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Sodium Silicate Water Glass
Sodium Silicate Water Glass
Sodium Silicate Water Glass
Sodium Silicate Water Glass
Sodium Silicate Water Glass
Sodium Silicate Water Glass
Sodium Silicate Water Glass
Sodium Silicate Water Glass
:
Packing Size:
250.00 Kg.Liq
Available Packing Size:
280 Kgs Drum. Feel free to ask for 5, 10, 20, 30, 60 Kg packing. We are keeping ready stock at Mumbai, Kandla, Chennai, Vizag, Kolkata, Fujairah, Dubai.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

L GLUTAMIC ACID

Product Description | Product Application | Product Notes| Product DOSE
Glutamic acid is an amino acid used to form proteins. In the body it turns into glutamate. This is a chemical that helps nerve cells in the brain send and receive information from other cells.  Glutamic acid may be involved in learning and memory.
Code:
RXSOL-60-6604-824
Other Equivalent Brand

L GLUTAMIC ACID food supplement

Short Description:
L GLUTAMIC ACID
Generic Name:
L GLUTAMIC ACID food supplEment
Add to Compare
|
Compare Now
Video not available
L GLUTAMIC ACID
Application:
Glutamic acid often is used as a food additive and flavor enhancer in the form of its sodium salt, known as monosodium glutamate (MSG).
Using Procedure:
Glutamic acid is an amino acid used to form proteins. In the body it turns into glutamate. This is a chemical that helps nerve cells in the brain send and receive information from other cells. It may be involved in learning and memory.
Note:
The relatively high glutamate levels in some traditional diets suggest that it is a safe food additive. However, anecdotal and scientific evidence indicates that high levels of glutamate and MSG consumption cause adverse health effects.
Technical Specifications:
Remarks:
1.Improve Memory and Focus
Glutamic acid works as a fuel for the brainGlutamic acid helps nerve cells send messages and receive information from cells.  low levels of glutamine. A glutamine deficiency is thought to cause symptoms like insomnia, low energy, and mental exhaustion.  
 
2. Support Prostate Health
Glutamic acid is essential for proper functioning in the prostate. As men age, it’s common for the prostate glands to start to increase in size. The medical name for this condition is prostatic hyperplasia (BPH). xperts often recommend glutamic acid supplements for prostate health to reduce symptoms of BPH.
 
3. Glutamic acid /  glutamine supplements prevent muscle breakdown.
 
Plant-based sources of glutamic acid:
 
Hemp seeds 
Beans, lentils, and peas
Green tea
Amaranth and Quinoa 
Brown rice
Spirulina
Oatmeal
L GLUTAMIC ACID  manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
 
L GLUTAMIC ACID  is available in small packing as well as in bulk. Buy premium quality L GLUTAMIC ACID and other lab chemicals from one of the most trusted brands.
L GLUTAMIC ACID
:
Packing Size:
25.00 Kg.PWD
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

KARL FISCHER REAGENT Pyridine Free

Product Description | Product Application | Product Notes| Product DOSE
The pyridine-free Karl Fischer reagent consists of two solutions, a dissolving agent and a titrating agent. The dissolving agent contains sulfur dioxide and a pyridine substitute in a solvent and is used for taking up the sample to be investigated with respect to its water content.
Code:
RXSOL-60-6604-769
Other Equivalent Brand

KARL FISCHER REAGENT Pyridine Free

Short Description:
KARL FISCHER REAGENT Pyridine Free
Generic Name:
Titrators For Accurate Karl Fischer Water Determinations
Add to Compare
|
Compare Now
Video not available
KARL FISCHER REAGENT Pyridine Free
Application:
An essentially pyridine-free Karl Fischer reagent useful in the determination of water, comprising a dissolving agent containing sulfur dioxide and a pyridine substitute in a Karl Fischer solvent, an [+] Read More...
Using Procedure:
Karl Fischer Reagent (Pyridine free). single soln for titrimetric determination of water 1 ml reagent ~5 mg water.
Note:
The analysis of the water content of a sample by Karl Fisher titration can be carried out using a volumetric method or a coulometric one.
Technical Specifications:
Remarks:
Karl Fischer titration is simply a method for quantifying water content of samples. The fundamental principle behind this reaction is based on the Bunsen reaction between compounds such as iodine, sulphur dioxide to form sulphuric acid and hydrogen iodide. Karl Fischer initiated a new method based on Bunsen’s reaction. He discovered that the reaction could be modified for determining water in a non-aqueous system containing an excess of sulphur dioxide in the presence of a suitable base. He used a primary alcohol (methanol) as the solvent and a base (pyridine) as the buffering agent.
 
What is the Karl Fischer Reaction?
(1) CH3OH + SO2 + RN [RNH]SO3CH3
 
Reaction-1:  is where the alcohol reacts with sulphur dioxide (SO2) and base to form an intermediate alkylsulfite salt
 
(2) H2O + I2 + [RNH]SO3CH3 + 2RN [RNH]SO4CH3 + 2[RNH]I
 
Reaction-2: is the oxidation step where the intermediate is then oxidised to an alkylsulphate salt. This reaction consumes water.

Water and iodine are consumed in a 1:1 ratio. Once all of the water present is consumed, the presence of excess iodine is detected by the indicator electrode. That signals the end-point of the titration. The amount of water present in the sample is calculated based on the concentration of iodine in the Karl Fisher titrating reagent and the amount of Karl Fisher Reagent consumed in the titration. Depending on the type of base used the rate of reaction will vary. Classic Karl Fischer reagents contained pyridine, a noxious carcinogen, as the base. Due to its weak basicity the reaction is slow and the end point is not stable. The most common base used today is imidazole where greatest accuracy and repeatability can be achieved. Coulometry is an absolute technique so standardisation of Karl Fischer reagents is not necessary.
 
 
Coulometric Titration Method
In coulometric Karl Fischer, iodine is generated electrochemically in situ during the titration.
The anolyte contains iodide, sulphur dioxide, bases and solvents such as methanol. Electrolytic oxidation occurs when a sample is added to this anolyte.
Iodine is generated at the anode of the titration cell as shown in formula (3)
(3) 2I--2e ---> I2
Stoichiometrically, 1 mole of water will react with 1 mole of iodine, so that 1 milligram of water is equivalent to 10⋅71 coulombs of electricity
Comparison of volumetric and coulometric titration cells.
 
In the volumetric technique, which is used to determine higher water contents generally at levels above 5%, the iodine is introduced via a burette or similar dosing system. For lower water content detection, down to ppm levels, the coulometric technique produces the iodine
in-situ by electrolysis. Coulometry improves the Karl Fischer technique by removing the need for reagent calibration and
provides an absolute result in micrograms of water.

Low reagent usage: multiple samples can be analysed with a single charge of reagent which means less waste and less handling of chemicals, good news for Health and Safety
 
 
 Karl Fischer KF Reagent

Karl Fischer KF Reagent A is a general coulometric KF anolyte for use with generator electrodes which incorporate a frit or diaphragm to separate the anode and cathode chambers. Used in conjunction with Reagent C this formulation is supplied in a pack of 8 x 100ml bottles, 8 x 5ml cathode vials, all conveniently located in a single carton.

To conform to ASTM, API, EI, ISO (plus others) methodology for water content determination of oil and petroleum products, the anode regent must be modified with xylene to improve sample solubility and miscibility. Karl Fischer KF Reagent is pre-mixed with xylene, and other solubilizers to eliminate side reactions, so that the operator does not have to store or mix chemicals.

 
 
 
Karl Fischer KF Reagents combine speed and accuracy
VOLUMETRIC COULOMETR K.F. Titration Cell Differences
• Single shot bottles
• Safer to use
• Safer to store
• Low cost
• Faster precondition
• Reduced downtime
• Improved sample miscibility / solubility
• For use with all coulometers
[KARL FISCHER REAGENT Pyridine Free] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
 
[KARL FISCHER REAGENT Pyridine Free] is available in small packing as well as in bulk. Buy premium quality [KARL FISCHER REAGENT Pyridine Free] and other lab chemicals from one of the most trusted brands.
KARL FISCHER REAGENT Pyridine Free
:
Packing Size:
1.00 Bottle
Available Packing Size:
Titrators For Accurate Karl Fischer Water Determinations
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

SULFOLane

Product Description | Product Application | Product Notes| Product DOSE
Sulfolane is good absorbent of H2S hydrogen Sulfied SOUR GAS. This is the reason why it is used in SHALE and Coal processes.
Code:
RXSOL-93-9303-250
Other Equivalent Brand

C4H8O2S

Short Description:
Sulfolane is used as an industrial solvent utilized for the extraction of aromatic hydrocarbons from hydrocarbon mixtures and to purify natural gas. Further, it is used in refineries and the petrochemical industry.
Generic Name:
Sulfolane Solvent
Add to Compare
|
Compare Now
Video not available
SULFOLane
Application:
Sulfolane is used as an industrial solvent utilized for the extraction of aromatic hydrocarbons from hydrocarbon mixtures and to purify natural gas. Further, it is used in refineries and the petrochemical industry.
Using Procedure:
Sulfolane also widely used  in the manufacture of polymers and electronics, and may be found in pharmaceuticals as a residual solvent used in the manufacturing processes.
Note:
Miscible with water, acetone, TolueneIncompatible with Strong Oxidizing agents.
Technical Specifications:

COA

TEST                                                                                                          RESULT
APPEARANCE: COLORLESS OR CANARY LUCID LIQUID QUALIFIED
PURITY (DRY BASIS) : 99.5%WT MIN 99.71%
DENSITY @ 30 DEG.C: 1.26-1.27 GM/ML 1.263
SULPHUR: 26-27% WT 26.45

THERMAL STABILITY: 20 MG OF SO2, MAX

 12.67
WATER: 0.1% WT, MAX 0.026
ASH: 0.1% WT, MAX 0.0048
DISTILLATION: (TEMP HAVE BEEN CORRECTED AT 760 MM HG)  
%REC. @ 282 DEG.C: 5%, MAX 0.4

%REC. @ 288DEG.C: 95%, MIN

 98.3
ISO-PROPYL SULPHOLANYL ETHYL: 0.50 %WT, MAX 0

SULPHOLENE-2: 0.30 %WT, MAX

 0.019
Remarks:

Chemical Properties

Formula                                C4H8O2S
Formula Weight 120.17
Melting point 25-28 °C
Boiling Point 285°C

Flash Point

 166°C (330°F)
Density 1.261
Storage & Sensitivity Hygroscopic. Ambient temperatures.
Solubility Miscible with alcohol, water, acetone, toluene and dilute mineral acids. Slightly miscible with octanes, olefins and naphthenes.

Sulfolane supplier in Mumbai, Kandla, Chennai, Ennore, Visakhapatnam, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Muscat Barka Oman

We also keeping ready stock of following chemicals : 

1. Hydrazine Hydrate 

2. Monoethanolamine 

3. Diethanolamine 

4. Sulfolane 

5. Morpholine 

6. Potassium carbonate 

7. Triethanolamine 

8. Cyclohexylamine 

9. Ethylene Diamine 

10. Trichloroethylene 

SULFOLane
:
Packing Size:
250.00 Kg.Liq
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Hydrometer

Product Description | Product Application | Product Notes| Product DOSE
Place the hydrometer into water, and let it flow freely in the water...
Code:
RXSOL-61-2879-002
Other Equivalent Brand

Glass Float Hydrometer, Hydro Meter

Short Description:
Place the hydrometer into water, and let it flow freely in the water
Generic Name:
Density Meter
Add to Compare
|
Compare Now
Video not available
Hydrometer
Application:
Hydrometer provide High Accuracy to get Density, Specific Gravity of liquid.
Using Procedure:
Density Meters Measures liquid concentration.
Note:
Seawater Hydrometer specialized for measuring the percentage of salt in seawater and Specific Gravity of the water and mix water.
Technical Specifications:
A range of 0.990 to 1.040 kg/l, suitable for use in sea and fresh water and thus covering the range of densities normally required.
 
A scale graduated in density kg/l in air ( density in air is cometimes termed apparent density ) This permits the weight to be obtained by multiplying the scale reading by the volume in m3 of water displaced.
 
Calibration of the hydrometer for use in seawater, a liquid of medium surface tension.

Seawater Hydrometer supplier in Dubai, Sharjah, AbuDhabi, Ajman, Fujairah UAE Middle East, Muscat Oman, Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Haldia, Howrah.

 INSTRUCTIONS FOR USE
1. A clean, representative sample of the supporting water should be obtained by means of a sampling can or other suitably designed sampling apparatus. A sample of at least 1 liter will help to ensure that the temperature and density do not change unduly between the collection of the sample and taking of the readings. The depth of water in the container must be sufficient to allow at least 25mm clearance between the bottom of the hydrometer and the bottom of the hydrometer and the bottom of the container. The internal diameter of the container or jar should be at least 50 mm.
2. The number of samples to be taken, also at which depths and at which positions outside the vessel they should be taken, may be important according to the circumstances.
3. Readings may be taken by lowering the hydrometer into a suitably shaped sampling apparatus or by transferring the water to a suitable glass test jar. If a metal or other non-transparent container is used for taking readings, ensure that it is full to the brim. If a glass test jar is used, it should preferably be rinsed first, so as to avoid undue temperature changes. The container or test jar should be shielded from draughts, which may affect the readings.
4. The reading must be taken in the sampling apparatus or glass test jar as rapidly as possible Undue delay in taking the reading could result in temperature changes leading to inaccurate results. In case of doubt, a repeat sample should be taken in order to verify the first observation
5. Ensure that the stem of the hydrometer and the surface of the water sample is free from grease and oil since the accuracy of the readings could be adversely affected
6. Hold the hydrometer vertically by the top of the stem and gently lower it into the water sample until it floats freely
7. Take the hydrometer reading where the level liquid surface meets the graduated scale.

CORRECTIONS TO HYDROMETER READING
1. For ydrometer the appropriate corrections should be applied.
2. For most Draft Survey purposes, no further corrections to the readings are needed.
Reading is most correct when the glass hydrometer is used at a temperature of 15°C. If immersed in water at temperatures higher or lower than 15°C, the instrument will expand or contract so that, for precise laboratory work, a small correction would be applicable However, for Draft Survey work, it should be noted that the ship itself will normally expand or contract according to the temperature of the water in which it is rating. The corrections required to compensate for these changes in volume are of opposite signs and tend to compensate for each other. As it is not practicable to calculate any temperature corrections for the ship, for most Draft Survey purposes no correction should be applied for the expansion or contraction of the hydrometer glass

Hydrometer Density supplier in India UAE Middle East Gulf Muscat Oman Nairobi Kenya.

Hydrometer
:
Packing Size:
1.00 No
Article News:
HYDROMETER use INSTRUCTIONS,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

ERIOCHROME BLACK T INDICATOR Solution

Product Description | Product Application | Product Notes| Product DOSE
ERIOCHROME BLACK T ACS GRADE excellent quality manufacturer, exporter and supplier. Eriochrome Black T, Reagent, ACS, also known as Solochrome Black T, is a complexometric indicator used as an indica [+] Read More...
Code:
RXSOL-62-6171-500
Other Equivalent Brand

EBT, ERIOCHROME BLACK T ACS GRADE, Indicator for EDTA titration, Solochrome Black T
 

Short Description:
Eriochrome Black T complexometric metal indicator solution
Generic Name:
Eriochrome Black T or EBT metal indicator
Add to Compare
|
Compare Now
Video not available
ERIOCHROME BLACK T INDICATOR Solution
Application:
Eriochrome black T is used as an indicator in analytical chemistry.  It is also used in the detection of rare earth metals. It finds application in dyeing and printing of wool fabric, dyeing of silk [+] Read More...
Using Procedure:
Metal Titration Indicator Water Hardness Determination process. It is an azo dye. Black Stains and Dyes and Indicators
Note:
Synonym :- 3-Hydroxy-4-(1-hydroxy-2-naphthylazo)-7-nitro-1-naphthalene sulfonic acid, sodium salt Suitability :- Passes (for complexometric determination of metals) Color :- Brownish-black to blac [+] Read More...
Technical Specifications:
C.A.S. No. 1787-61-7
CI NO. 14645
M.F. C20H12N3NaO7S
M.W. 461.38gm/mole

Specifications:

Solubility 0.1 % (Dist. Water) Clear solution
Absorption Maximum (at pH 10.0 Ammonia Buffer + 2ml 0.05M E.D.T.A.) ?max 610-630nm
Absorptivity (A1%,1cm at ?max at pH10.0 Ammonia Buffer + 0.05M E.D.T.A.) >300
Loss On Drying (110°C) <1%
Suitability as indicator for Metal Titration Passes test
 
Remarks:

CAS 1787-61-7,7647-14-5

Eriochrome Black T is a complexometric indicator. During titrations of water hardness determination process. Eriochrome Black T is BLUE in colour but in the presence of calcium, magnesium, or other metal ions It turns RED.

Eriochrome Black T or EBT plays colour changing role in between 6.3 to 11.5, and with RED as its acidic colour and ORANGE its basic color. 

Stability: :Stable. Incompatible with strong oxidizing agents, strong reducing agents.

Eriochrome Black T, Reagent, ACS is complexometric indicator also known as Solochrome Black T.  Most popular to used as an indicator in EDTA titration. Also used in many high-purity applications and typically designate the highest quality chemical available for laboratory use. 
Spectrum Chemical manufactured Reagent ACS grade products meet the toughest regulatory standards for quality and purity.

ERIOCHROME BLACK T INDICATOR Solution manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of ERIOCHROME BLACK T INDICATOR Solution at a competitive price from us. We have ready stock of ERIOCHROME BLACK T INDICATOR Solution in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

ERIOCHROME BLACK T INDICATOR Solution
:
Packing Size:
1.00 Bottle PWD
Article News:
Water hardness determination,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Potassium Chloride Fire Extinguisher

Product Description | Product Application | Product Notes| Product DOSE
High Purity Potassium chloride used as a fire extinguishing agent, used in portable and wheeled fire extinguishers. Known as Super-K dry chemical, Potassium chloride is metal halide salt resulting more effective than sodium bicarbonate-based dry chemicals and was compatible with protein foam.
Code:
RXSOL-64-8102-050
Other Equivalent Brand

Potassium Chloride

Short Description:
Potassium Chloride Exporter, Manufacturer
Generic Name:
K Dry chemical
Active Matter:
99
Add to Compare
|
Compare Now
Potassium Chloride Fire Extinguisher
Application:
  Other names Sylvite common name Muriate of potash Potassium Chloride Identifiers [+] Read More...
Using Procedure:
Along with sodium chloride and lithium chloride, potassium chloride is used as a flux for the gas welding of aluminium.
Note:
Potassium chloride is rated for B and C fires as Fire Extinguisher  
Technical Specifications:

Appearance                                                                     White free flowing crystalline powder

Density                                                                             1.98 SG

Bulk Density                                                                      71 to 78 Ib/ ft³

Aqueous Solubility                                                            Up to 24%, 278.9 gL of solution at 68˚F (20˚C)

Purity                                                                                 98.83%-99%

K20                                                                                    62% and above

Remarks:
Product Details:
 
Color White
Grade Standard Reagent Grade, Technical Grade
Packaging Size 50kg
Packaging Type HDPE bags
Physical State Powder, Granules, Crystals
Usage Industrial
Purity 99%
We are the one of the leading manufacturers and suppliers Potassium Chloride Crystals.  Processed in a clean and hygienic medicinal environment, these crystals are highly effective.  In addition to this. Owing to their enhanced shelf life, these products can be stored for a long time. 
 
Features:
Compositional accuracy
Longer shelf life
Precise pH range
Compositions:
Purity: 99% 
Presence: White Crystalline powder 
Potassium Chloride is a salt of metal halide that combines potassium and chlorine. Featuring the formula KCl, this salt is odourless in nature and can be distinguished by its white and sometimes colourless vitreous crystal-like appearance.
The salt readily dissolves in water without leaving a residue 
 
Features:
Inexpensive as compared to other salts
Produced and processed as per approved technology
Sold at economical prices
Packed in good quality boxes and containers

Potassium Chloride finds numerous uses, especially in the field of Agriculture, Medicine, Radiation, food & beverages, and more. Another well-known use of this salt is as a fire extinguisher. 

We are major exporter of Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa

Potassium Chloride Fire Extinguisher
:
Packing Size:
50.00 Kg.PWD
Available Packing Size:
25 Kgs, 50 Kgs, 1000 Kgs, 1500 Kgs.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Conductivity Powder

Product Description | Product Application | Product Notes| Product DOSE
Conductivity powder for ground earthing also known as back fill compound. Principally this coductivity powder works as chemical earthing in software companies to arrest the lightening during rainy season. It protects the devices from short circuit and accidents.
Code:
RXSOL-26-8101-025
Other Equivalent Brand
Short Description:
Carbonaceous powders for for ground earthing. Ground Earthing enhancement materials are high conductivity materials, which are designed to lower ground system resistance and improve grounding effectiveness in high resistivity soil conditions.
Information:

Conductivity powder available in various packing and standard. Electrical conductivity of powders plays very important role during current circulation towards earth this is the reasonwhy engineer have good remark to use electronic powder in earthing area.

Active Matter:
80
IMPA Code:
RXSOL-41-8101-025
Add to Compare
|
Compare Now
Video not available
Conductivity Powder
Application:
This ground earthing powder is known as back fill compound which is used for chemical earthing in software companies to arrest the lightening during rainy season. It protects the devices from short circuit and accidents.
Using Procedure:
Soil Electrical Earthing Agent  Exporter and Supplier
Note:
Advantage • It helps and works as ground earthing mineral. • It is effective as a current filtering agent. • It promotes electric curent stability. • It can be added directly to earthing soil area.
Technical Specifications:
The specification is as below :-
 
Natural graphite - 20%
Sodium bentonite - 30%
Gypsum powder - 10%
Megnatite -  2%
Cadmium  - 10 ppm
Lead - 22 ppm
Mercury - 10 ppm
Chromium - 5 ppm
Monobromobyphenyle - 3 ppm
 
Electrical conductivity - 1 ohm
 
After making gel mixture with water ,  conductivity is below 1 ohm.
Remarks:

Ground Earthing enhancement materials are high conductivity materials, which are designed to lower ground system resistance and  improve grounding effectiveness in high resistivity soil conditions.

Conductivity Powder manufacturer and supplier in Mumbai, Kandla - Gandhidham, Kolkata, Chennai, Visakhapatnam, Fujairah, Dubai, Abu Dhabi, Sharjah, Oman, Bahrain.

Conductivity Powder
:
Packing Size:
50.00 Kg.PWD
Available Packing Size:
50 Kgs, 1000 Kgs Jumbog Bag, 1500 Kgs Jumbo Bag
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Bentonite Soil Conditioning Agent

Product Description | Product Application | Product Notes| Product DOSE
Bentonite Supplier for Oil Field Industries. Moisture retaining clay. Bentonite is used as a backfill to reduce soil resistivity. When mixed with water, it swells to several times its dry volume. The [+] Read More...
Code:
RXSOL-41-8101-025
Other Equivalent Brand

Bentonite Powder Electrical Earthing Agent

Short Description:
Soil Conditioning Electrical Earthing Agent Bentonite Exporter Supplier
Generic Name:
Earthing Powder
Add to Compare
|
Compare Now
Video not available
Bentonite Soil Conditioning Agent
Application:
• It is Viscosifier and Filtration control agent for water based Mud Systems. • It is used in drilling muds for controlling bore hole stability. It is utilized in drilling muds to extract drill cuttings from the bit. • It is also used for clearing cat litter
Using Procedure:
Bentonite can be Broadely classified in 2 grades :   Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in [+] Read More...
Note:
Advantage • It helps improve hole cleaning capacities of drilling fluids. • It is effective as a filtering agent. • It promotes borehole stability. • It can be added directly to fresh water or fresh water based drilling fluids.
Technical Specifications:
Remarks:

 

Physical State

:Free Flowing Powder

Viscometer Dial reading at 600 r/min

: Min 30

Yield Point/Plastic Viscosity Ratio

: Max 3

Residue of diameter greater than 75um

: Max mass friction 4,0%

Filtrate Volume

: Max 15.0 Cm3

Moisture

: 10% wt percent max

Bentonite supplier in Mumbai, Fujairah, Dubai, Sharjah, Abu Dhabi, Muscat, Oman, Sudan, Nairobi, Kenya, Kolkata, Chennai, Visakhpatnam, Gandhidham

Bentonite Soil Conditioning Agent manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Bentonite Soil Conditioning Agent at a competitive price from us. We have ready stock of Bentonite Soil Conditioning Agent in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Bentonite Soil Conditioning Agent
Bentonite Soil Conditioning Agent
:
Packing Size:
25.00 Kg.PWD
Available Packing Size:
50 Kgs, 1000 Kgs Jumbog Bag, 1500 Kgs Jumbo Bag
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : rxmarinechemical@gmail.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarinechemical@gmail.com ( This mail is for supplier only )

 

 

Syndicate content