Foundry Ind Chemicals-54

COA

Chemical Properties

Sulfolane supplier in Mumbai, Kandla, Chennai, Ennore, Visakhapatnam, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Muscat Barka Oman

We also keeping ready stock of following chemicals : 

1. Hydrazine Hydrate 

2. Monoethanolamine 

3. Diethanolamine 

4. Sulfolane 

5. Morpholine 

6. Potassium carbonate 

7. Triethanolamine 

8. Cyclohexylamine 

9. Ethylene Diamine 

10. Trichloroethylene 

Seawater Hydrometer supplier in Dubai, Sharjah, AbuDhabi, Ajman, Fujairah UAE Middle East, Muscat Oman, Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Haldia, Howrah.

 INSTRUCTIONS FOR USE
1. A clean, representative sample of the supporting water should be obtained by means of a sampling can or other suitably designed sampling apparatus. A sample of at least 1 liter will help to ensure that the temperature and density do not change unduly between the collection of the sample and taking of the readings. The depth of water in the container must be sufficient to allow at least 25mm clearance between the bottom of the hydrometer and the bottom of the hydrometer and the bottom of the container. The internal diameter of the container or jar should be at least 50 mm.
2. The number of samples to be taken, also at which depths and at which positions outside the vessel they should be taken, may be important according to the circumstances.
3. Readings may be taken by lowering the hydrometer into a suitably shaped sampling apparatus or by transferring the water to a suitable glass test jar. If a metal or other non-transparent container is used for taking readings, ensure that it is full to the brim. If a glass test jar is used, it should preferably be rinsed first, so as to avoid undue temperature changes. The container or test jar should be shielded from draughts, which may affect the readings.
4. The reading must be taken in the sampling apparatus or glass test jar as rapidly as possible Undue delay in taking the reading could result in temperature changes leading to inaccurate results. In case of doubt, a repeat sample should be taken in order to verify the first observation
5. Ensure that the stem of the hydrometer and the surface of the water sample is free from grease and oil since the accuracy of the readings could be adversely affected
6. Hold the hydrometer vertically by the top of the stem and gently lower it into the water sample until it floats freely
7. Take the hydrometer reading where the level liquid surface meets the graduated scale.

CORRECTIONS TO HYDROMETER READING
1. For ydrometer the appropriate corrections should be applied.
2. For most Draft Survey purposes, no further corrections to the readings are needed.
Reading is most correct when the glass hydrometer is used at a temperature of 15°C. If immersed in water at temperatures higher or lower than 15°C, the instrument will expand or contract so that, for precise laboratory work, a small correction would be applicable However, for Draft Survey work, it should be noted that the ship itself will normally expand or contract according to the temperature of the water in which it is rating. The corrections required to compensate for these changes in volume are of opposite signs and tend to compensate for each other. As it is not practicable to calculate any temperature corrections for the ship, for most Draft Survey purposes no correction should be applied for the expansion or contraction of the hydrometer glass

Hydrometer Density supplier in India UAE Middle East Gulf Muscat Oman Nairobi Kenya.

Specifications:

CAS 1787-61-7,7647-14-5

Eriochrome Black T is a complexometric indicator. During titrations of water hardness determination process. Eriochrome Black T is BLUE in colour but in the presence of calcium, magnesium, or other metal ions It turns RED.

Eriochrome Black T or EBT plays colour changing role in between 6.3 to 11.5, and with RED as its acidic colour and ORANGE its basic color. 

Stability: :Stable. Incompatible with strong oxidizing agents, strong reducing agents.

Eriochrome Black T, Reagent, ACS is complexometric indicator also known as Solochrome Black T.  Most popular to used as an indicator in EDTA titration. Also used in many high-purity applications and typically designate the highest quality chemical available for laboratory use. 
Spectrum Chemical manufactured Reagent ACS grade products meet the toughest regulatory standards for quality and purity.

ERIOCHROME BLACK T INDICATOR Solution manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of ERIOCHROME BLACK T INDICATOR Solution at a competitive price from us. We have ready stock of ERIOCHROME BLACK T INDICATOR Solution in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Conductivity powder available in various packing and standard. Electrical conductivity of powders plays very important role during current circulation towards earth this is the reasonwhy engineer have good remark to use electronic powder in earthing area.

Ground Earthing enhancement materials are high conductivity materials, which are designed to lower ground system resistance and  improve grounding effectiveness in high resistivity soil conditions.

Conductivity Powder manufacturer and supplier in Mumbai, Kandla - Gandhidham, Kolkata, Chennai, Visakhapatnam, Fujairah, Dubai, Abu Dhabi, Sharjah, Oman, Bahrain.

Physical Properties and Tecnical Specification

1) Acidic Radiator Cleaner: For Heavy scales and dirt (PH : 1.0 to 3.0)     ::: RXSOL-16-2697-025 ( Acidic )
2) Basic Radiator Cleaner (Conditioner): For Light scale and dirt (PH : 9.0 to 12.0)  ::: RXSOL-40-4051-025 ( Alkaline )
3) Special Type of Radiator Cleaner in powder form 

Redkleen RX 400 Radiator Flush & Cleaner Manufacturer and supplier in Mumbai, Surat HAZIRA, Gandhidham Kandla Gujrat, Chennai, Visakhapatnam, Kolkata, Paradip, Sudan, Nairobi, Kenya, Muscat, Barka, Ruwi, Oman, Fujairah, Ajman, Abudhabi, Dubai, Sharjah, UAE Gulf, Yemen

Radiator Maintenance chemicals and Radiator Coolant Manufacturer and Supplier :

Radiator Coolant 20% Conc. ::: Part No.- RXSOL-40-4045-025
Suitable to add to the cooling water of internal combustion engines for excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks,  ships and lokomotives. 

Coolant Green RXSOL G 93-94 ::: inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals Part No.- RXSOL-40-4021-025 

Coolant 25 Ltrs ::: Useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life. Part No.- RXSOL-40-4004-025

Radiator Cleaner ::: This is specially formulated for use as radiator cleaner. Radiator cleaner removes the dirt, grease, scale, grime & solder from the engine cooling system. Radiator cleaner is a powerful cleaning agent not only for the automobile engine but can be used for the steam tube and boiler tube etc. Part No.- RXSOL-16-2697-025

Carbon Remover ::: Concentrated RXSOL-16-1003-025 is most effective product in its category due to its quick and complete action. can be applied for cleaning of highly soiled components. blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder etc.. Part No.- RXSOL-16-1003-025

Email us to get best discounted price for Radiator coolant and Cleaner in India - UAE Middle East - Oman : mail@rxmarine.com