Antiscalant Polymer

This is a reverse osmosis membrane treatment chemicals . It is  highly concentrated  polymer chemicals. RXSOL Antiscalant water additives, used as pretreatment for Reverse Osmosis systems, are highl [+] Read More...
Active Matter:
72
Packing Size:
20.00 Ltr.
Code:
RXSOL-33-3302-020
For INDIA based requirement mail us at rxmarine@gmail.com  or you may call us +91 22 65113333 / 65115555 / 65119999  while  For Gulf Middle East email id id  dubichem@gmail.com  & Tel No.   00971 9 2242524 / 2242534 We are Operational at following location with STOCK POINT Surat, Kandla, Gandhidham, Mundra, Hazira, Tata, Ranchi, Kolkata, Haldia, Buz Buz, Paradip, Vizag ( Visakhapatnam ), Tuticorin, Cochin, Goa, Mumbai, JNPT, Pirpav, Chennai, Ennore, Fujairah, Sharjah, Dubai, Middle East  

 

Antiscalant Polymer
Application:
Without some means of upstream scale inhibition, RO membranes and their flow passages will foul due to scale, the precipitation of sparingly soluble salts. Common examples of scale are calcium carbona [+] Read More...
Using Procedure:
RXSOL Antiscalant is an aqueous solution of an organic chemicals. RXSOL Antiscalant is miscible with water in all proportions. It may be applied as the neat product, or as a solution in permeate.  RXSOL Anti [+] Read More...
Note:
CHARACTERISTICS, ADVANTAGES & APPLICATIONS:- Excellent control of carbonate and sulphate scales for cost effective operation.  Compatible with all major membranes  International potable water a [+] Read More...
Technical Specifications:

PHYSICAL PROPERTIES:-

Because RXSOL-33-3302-020 is a highly concentrated product, 
It is acceptable to use small doses of reagent. 
Suspended substances such as dirt, bottom sediments, clay, metal oxides are dispersed, and their possible precipitation decelerates. The strong dispersing power of RXSOL-33-3302-020 allows the reagent to maintain its efficiency in waters with high total salt content, as well as in areas with a low liquid flow rate. Salts of calcium and magnesium, such as CaCO3, CaSO4, CaSO4 · H2O, MgSiO4, are dispersed, and the formation of their sediments is suppressed. 

Appearance: cloudy, viscous liquid 
Density (kg / m3): 1180 
pH (approximately): 9.8 
Solubility in water: soluble in any proportion 
Flash point: not determined 

These data can be considered as typical values, but by no means as specifications 

Precaution:

Precautionary measures Use protective gloves and goggles. If the reagent enters the skin, eyes, rinse with plenty of water, consult a doctor.  If a reagent leakage is collected with sand or other absorbent material, rinse the contaminated surface with water.  Before use, read the additional information in the Safety Instructions. 

Antiscalant Polymer