Browse : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z  
Featured Products 

Pickling Dip Liquid

RXSOL Pickling Liquid - Performs multiple cleaning action such as degreaser by removing oil effectively and also providing protective coating to keep rust free surface. Uses of Pickling liquid RXSOL h [+] Read More...
Generic Name:
Anti Spatter
Packing Size:
5.00 Ltr.
Available Packing Size:
5 Ltr, 25 Ltr
Code:
RXSOL-68-6805-005
Pickling Dip Liquid
Application:
The Pickling Dip Liquid  fluid is recommended for immersion pickling of small objects and for pickling surfaces that are time-consuming to brush or spray pickle. It can also be used for circulation pi [+] Read More...
Using Procedure:
Standard grades, such as 304 and 316: Mix 1 part Pickling Dip Liquid   into 3 patrs of water. A further dilution can be done if longer pickling timesc an be accepted. High-alloyed grades, such as duplex grad [+] Read More...
Note:
Features & Benefit : Restores stainless steel surfaces that have been damaged during fabrication operations such as welding, forming, cutting and blasting. It removes weld oxides, the underlying chromi [+] Read More...
Technical Specifications:
 

Physical state at 20oC

:

Colourless liquid

Boiling point

:

80-100oC

Flash point / Explosion properties

:

Not applicable

Specific temperatures:

:

Solid-fluid 40oC, Fluid-gas 50-60oC (nitric fumes)

Vapour pressure at 20oC

:

< 0.01 kPa

pH

:

0 at 20oC

Density

:

1.1-1.4 g/cm3 at 20oC

Solubility in water at 20oC

:

100 weight %

 

Remarks:

MATERIALS AND CONDITIONS TO AVOID INCOMPATIBILITY : Caustics, Amines, Alkanolamines, Aldehydes, strong Oxidizing agents and Chlorinated compounds.

Pickling Liquid having multiple utility, Its multi directional uses have 8 products properties as follows:


1. Degreasing Action as METAL SURFACE CLEANER – Removes light mill oil and water based cutting fluid

2. RUST Cleaner as RUST REMOVER – Removes surface rust completely

3. Corrosion Inhibitor as RUST INHIBITOR – Provides years of indoor Rust Protection (more than 6 to 8 years).

4. RUST CONVERTER – Converts 100% Rust and provide Protective coating

5. Clean Surface for WELDING PREPARATION as a ANTI-SPATTER

6. Works as PRE-TREATMENT and CONVERSION COATING – Prepares the metal surface for Priming, Painting, Electro-static painting, Powder Coating etc. Also can be used with High Temperature Paint & Coatings(operating temperature up to 2000⁰F)

7. Resisit further oxidation and acts as a SEALER  RX Pickling Liquid coating seals by itself and stops further oxidation


8. RX Pickling Liquid effectively acts as a DE-SCALER (MILL SCALE, HEAT SCALE)– One Step De-scaling/De-Rusting removes mill scale & rust, provide a conversion coating and Seal the coating.

SAVING A LOT OF LABOR, TIME & COST, ALL IN SIMPLE ONE STEP PROCESS. ALSO ENVIRONMENTALLY SAFE, NON-HAZARDOUS, WATER BASED & READY TO USE PRODUCT.

Pickling Dip Liquid is Water based Conversion coating, Rust/Heat scale remover, Rust inhibitor, & Recommended Use Rust converter, Effectively used for Weld prep., Anti-spatter and a complete metal surface preparation/pre-treatment compound for ferrous & non-ferrous metal. 

Pickling Dip Liquid Savings:
1) “Value Added Product” which Saves a lot of labor, time, cost & energy by eliminating one or more traditional steps during metal surface preparation for welding and finishing (priming, painting, powder coating etc.)
2) Very large coverage (around 1600 sq. ft. per gallon
3) Unit Cost is few cents per sq. ft. along with a very less labor time. 
4) Long Shelf Life – No Wastage
5) Solves all quality failures such as, Welding failure, Adhesion failure as well as solving the Rusting problem completely. 

THE UNIT COST FOR THE PRODUCT IS FEW CENTS PER SQ. FT., BUT THE ACTUAL PRODUCT COST COMES OUT BELOW ZERO AFTER USE, BECAUSE OF ELIMINATING ONE OR MORE TRADITIONAL PROCESS STEPS. 


BENEFIT of Pickling Dip Liquid : 

1) Complete Rust Removal on any Metal surface (Ferrous and Non-ferrous metal)
2) Long term Indoor Rust Protection (for several years)
3) Welding, including welding on Hot rolled steel without removing the Mill scale
4) Priming, Painting, Electrostatic painting, Powder coating, Epoxy coating, Ceramic coating etc.
5) Metal surface preparation for High Temperature coating, such as Epoxy Coating (oven temperature around 500°F), Ceramic coating (baking temperature around 1800°F) etc.
6) One Step De-scaling/Coating of Hot Rolled steel (mill scale) & Heat scale at room temperature.
7) Used for metal surface preparation of New metal as well as for re-painting jobs after blasting (maintenance)
8) Injection Molding – For Die manufacturers as well as Injection molding companies (both Plastic & Metal)
9) STAINLESS STEEL PASSIVATION: Complete SS passivation of Stainless Steel by a dipping process at room temperature or in heated condition (to speed up process), with Zero Waste disposal. Replaces Nitric Acid Passivation Process.
10) Rebar Coating: New Rebar can be de-scaled/condition/pickle/coated/sealed by Pickling dip Liquid Picklex in one step for better corrosion resistance during storage and also inside concrete.

Question: How do I book material ?

Answer: Please note you are eligible to get heavy discount  for each deal. Please update your profile, so we can help you with your bookings.
 
 
Question: I want to know the address details of Branch.
Answer: We are happily delivering most of the areas. Please specify your location where from you need the delivery.
 
Question: Can I replace the materials ?
Answer: Generally, we are only supplying our quality approved product, But before purchasing you may ask for single unit purchase. However, if your purchase  is within our ware house distribution limit  you may use our replacement policy.
 
Question: Can I book our materials from our home location to other branch sector ?
Answer: Location change is  allowed by our various  located  company. For example  If your home location is Kandla, And your ship arrival plans have changed from Kandla to Chennai,  you are eligible to get materials from our chennai loation on same price. 

Question: Can I work as commision agent ?
Answer: As per our working policy,  you are eligible for maximum 2% as a trade discount. Companies may oblige correction of discount, subject to approval. 
 
Discount Plan, Choose your special offer.
GET A Membership PLAN (50% OFF)
 
For INDIA based requirement mail us at rxmarine@gmail.com  or you may call us +91 9652288588 / 09652288988 / 09004328440 / 09004328916  while  For Gulf Middle East email id id  dubichem@gmail.com  & Tel No.   00971 9 2242524 / 2242534 We are Operational at following location with STOCK POINT Surat, Kandla, Gandhidham, Mundra, Hazira, Tata, Ranchi, Kolkata, Haldia, Buz Buz, Paradip, Vizag ( Visakhapatnam ), Tuticorin, Cochin, Goa, Mumbai, JNPT, Pirpav, Manglore, Chennai, Ennore, Fujairah, Sharjah, Dubai, Abudhabi Mussafah Middle East  

 

Pickling Dip Liquid

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : mail@rxmarine.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarine@gmail.com ( This mail is for supplier only )