Antiscalant Antifoulant Corrosion Inhibitor 704
Product Description | Product Application | Product Notes| Product DOSE
Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid antiscalant / antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separ
Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid antiscalant / antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems. This highly effective liquid antiscalant/antifoulant is formulated specifically to be used with RXSOL Coagulant. It is imperative that the coagulants used are compatible with the antiscalant/antifoulant being injected as incompatible chemicals may cause membrane fouling.
Code: RXSOL-33-3337-025
Other Equivalent Brand
Genesys RC - Antiscalent, Antiscalant IBC Hypersperse MDC704, KylinTreat M704 Reverse Osmosis Antiscalant Phosphorous free
Short Description:
Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems
Generic Name: Antiscalant Antifoulant
Active Matter: 81-85
Antiscalant Antifoulant Corrosion Inhibitor 704
Application:
For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing. For potable applications the maximum dosage is 10 m
For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing. For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. Antiscalant / Antifoulant Corrosion Inhibitor 704 helps Block particles disperse to maintain the reverse osmosis membrane surface clean.
Using Procedure:
Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown: Temperature Maximum Dilution % 35°C 50 Important Note: Ov
Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:
| Temperature | Maximum Dilution % |
| <30°C | 10 |
| 30 – 35°C | 25 |
| >35°C | 50 |
Important Note: Over and under-dosing may cause membrane fouling so please contact RX Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions
Note:
Future & Benefit Excellent results as a replacement for softenerfilters Compatible with SoliSep* MPT150 coagulant Highly effective over a wide-range of waters For calcium-based and sulfate-bas
Future & Benefit
- Excellent results as a replacement for softenerfilters
- Compatible with SoliSep* MPT150 coagulant
- Highly effective over a wide-range of waters For calcium-based and sulfate-based scales, notably, barium sulfate.
- Compatible with all of the leading RO membranes
- Maintains cleaner membrane surfaces by inhibition and dispersing particulate foulants
- Effective over a wide pH range
- May be fed neat or diluted
- Compatible with feedwaters that contain aluminum and iron oxides
Handling :
Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.
Storage : Store in a cool, dry place out of direct sunlight. Keep only in the original container.
Technical Specifications:
Form: Clear liquid
Color: Light yellow
Specific Gravity: >1
pH value: 4.5 - 5.5 ( Effective over a broad pH range 5 - 9 Compatible with feed waters that contain aluminum and iron oxides )
Solubility in water: 100% soluble
RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Reverse Osmosis Antiscalant, Phosphorous free
RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is a highly effective antiscalant developed to control scale precipitates of Silica, Calcium Carbonate, Calcium Sulfate, Barium Sulfate and Strontium Sulfate, and reduce particulate fouling in the membrane separation systems of reverse osmosis (RO), nano-filtration (NF) and ultra-filtration (UF).
RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is phosphorous free. It is formulated by high performance multipolymers.
Highly effective over a wide-range of waters – for calcium-based and sulfate-based scales, notably, barium sulfate.
RO ANTISCALANT
RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Effectively control CaCO3 up to LSI +3.0, CaSO4, SrSO4, BaSO4, CaF2, SiO2, Fe2O3, etc.
Antiscalant Antifoulant Corrosion Inhibitor 704 RXSOL is compatible with all of the leading reverse osmosis membranes, such as Dow, Filmtec, GE, Hydranautics, TORAY, etc.
Antiscalant Antifoulant Corrosion Inhibitor 704 Exporter, Manufacturer and supplier in India, UAE, Oman, Kenya. Antiscalant Antifoulant Corrosion Inhibitor 704 available ready stock at Mumbai, Nairobi, Kenya, Chennai, Kolkata, Visakhapatnam, Gandhidham, Kandla, Fujairah, Dubai, Ajman, Abudhabi, Dubai, Sharjah UAE Middle East, Canada, Jinja Uganda, Canada
Antiscalant Antifoulant Corrosion Inhibitor 704 helps to extend the membrane life and reduce the running cost.
Packing Size: 25.00 Kg.Liq
Available Packing Size:
Antiscalant Antifoulant Corrosion Inhibitor 704 available in 5, 10, 20, 25, 50, 210 Ltr
Article News:
Types of Corrosion Inhibitor, What is Corrosion Inhibitor?, Antiscalant Supplier , RX Marine Contact Details, Water treatment chemicals,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride