Browse : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z  
Featured Products 

Acetylene Gas Cylinder

Acetylene Gas marine bottle supplier on ship. In combination with oxygen, acetylene filling is used for gas cutting and welding. When blended with oxygen for welding, the fire temperature will achieve 3100º C 
Article News:
,
Packing Size:
1.00 No
Code:
RXSOL-16-6154-040
Acetylene Gas Cylinder
Application:
Features Colourless and slightly lighter than air It is non-toxic, but has an anesthetic effect if inhaled Acetylene is highly flammable When mixed with oxygen for welding, the flame [+] Read More...
Using Procedure:
Acetylene mixed with air is explosive within 2.2% to 85% by volume. Avoid releasing acetylene into the air and ensure good ventilation where acetylene cylinders are stored or used. When acetylene cylinder [+] Read More...
Note:
Technical Specifications:

 

Physical state at 20 °C :

Dissolved gas.

Colour   

Colourless gas.

Odour   

Garlic like. Poor warning properties at low concentrations.

Molecular weight

26

Melting point [°C] :

-80.8

Boiling point [°C] :

-84 (s)

Critical temperature [° C]:  

35

Vapour pressure [20°C] :

44 bar

Relative density, gas (air=1) :

0.9

Relative density, liquid (water=1) :

Not applicable

Solubility in water [mg/l] :

1185

Flammability range [vol% in air] :

2.34 to 83

Auto-ignition temperature [°C] :

325

 
We are supplying welding and cutting items and gases particularly intended to meet the most noteworthy gauges of the overall marine industry and to perform under the most thorough shipboard conditions. 
Security is dependably a prime thought. From the spout blending outline of our slicing connection to the prescribed flashback arrestors and reverse discharge valves, no welder ought to be without. All items are intended to perform securely and dependably under the hardest states of shipboard utilize and bolstered with parts and administration through Dubichem Marine International in every significant port all through the world. 
 
Acetylene 
Dubichem Marine International acknowledges no duty regarding non-standard cylinders being arrived without earlier assent in composing. Dubichem Marine International will give typical barrel support including intermittent hydrostatic assessment and recertification and substitution of worn best valves at no cost to the ship proprietor. The repair of any harms caused by abuse or despicable taking care of by the client or missing valve security tops will be charged to the record of the ship proprietor. Drew Marine won't acknowledge for credit cylinders which have been subjected to bend consume, fire, fire or effect bringing about imprints or gouges. 
Acetylene A-40 General Description 
The Acetylene and Oxygen Distribution System gives the gas supply to the cutting/brazing applications locally available vessels. 
The Acetylene and Oxygen cylinders with chamber valves, T-valves, shutting valves and focal controllers might be arranged in isolated store on or over the upper constant deck with the cylinders put in an erect position and the controllers secured with wellbeing valves ventilated to outdoors. The outlet station is typically set in the motor room or in the workshop. On extraordinary reason ships, it might be put on open deck. 
Highlights 
Colourless and somewhat lighter than air 
It is non-poisonous yet has a soporific impact if breathed in 
Acetylene is very combustible 
When blended with oxygen for welding, the fire temperature will achieve 3100º C 
 
 
Safeguard and Information for clients/Owners 
Staying away from impacts which could harm either the shell and additionally permeable material; 
Shutting valves on purge cylinders; 
Keeping up the leftover weight inside the barrel; 
Denying transfilling of cylinders; 
Staying away from drenching in water 
 Encouraging not to conceal harm to cylinders that could, for instance, have been submerged or harmed, e.g. by repainting, and; 
 Putting away purge cylinders in committed territories with the valves shut. 
 
Technical 
Acetylene blended with air is unstable inside 2.2% to 85% by volume. Abstain from discharging acetylene into the air and guarantee great ventilation where acetylene cylinders are put away or utilized. 
At the point when acetylene cylinders are transported evenly and set vertically again after transport, a time of no less than 24 hours before utilizing the cylinders for gas extraction must be complied. 
This to guarantee that the CH3)2CO inside the chamber redistributes effectively. At the point when cylinders are utilized too rapidly subsequent to setting them vertical again the accompanying can happen: 
When opening the best valve, a lot of CH3)2CO can turn out. The client may decipher this as water/oil since CH3)2CO feels elusive on the skin. Opening the best valve without a fitted controller ought not be standard practice as this can make a fire peril. 
At the point when a controller is fitted with twin hose and light, the lit fire will be exceptionally unsteady because of the nearness of CH3)2CO beads in the gas. This is regularly alluded to as "spitting". 
The arrangement is to give the chamber a chance to rest for no less than 24 hours (contingent upon temperature; colder condition may require longer time). 
Tare "A" weight of acetylene cylinders incorporates barrel shell, neckring, valve, permeable mass and CH3)2CO. For acetylene the accompanying is legitimate: 
1 nm3 = 1.095 kg 
1 kg = 0.91 nm3 
1 bar = 14.5 psi 
1 nm3 = 35.3 ft3 
1 kg = 2.2 lbs

Question: How do I book material ?

Answer: Please note you are eligible to get heavy discount  for each deal. Please update your profile, so we can help you with your bookings.
 
 
Question: I want to know the address details of Branch.
Answer: We are happily delivering most of the areas. Please specify your location where from you need the delivery.
 
Question: Can I replace the materials ?
Answer: Generally, we are only supplying our quality approved product, But before purchasing you may ask for single unit purchase. However, if your purchase  is within our ware house distribution limit  you may use our replacement policy.
 
Question: Can I book our materials from our home location to other branch sector ?
Answer: Location change is  allowed by our various  located  company. For example  If your home location is Kandla, And your ship arrival plans have changed from Kandla to Chennai,  you are eligible to get materials from our chennai loation on same price. 

Question: Can I work as commision agent ?
Answer: As per our working policy,  you are eligible for maximum 2% as a trade discount. Companies may oblige correction of discount, subject to approval. 
 
Discount Plan, Choose your special offer.
GET A Membership PLAN (50% OFF)
 
For INDIA based requirement mail us at rxmarine@gmail.com  or you may call us +91 9652288588 / 09652288988 / 09004328440 / 09004328916  while  For Gulf Middle East email id id  dubichem@gmail.com  & Tel No.   00971 9 2242524 / 2242534 We are Operational at following location with STOCK POINT Surat, Kandla, Gandhidham, Mundra, Hazira, Tata, Ranchi, Kolkata, Haldia, Buz Buz, Paradip, Vizag ( Visakhapatnam ), Tuticorin, Cochin, Goa, Mumbai, JNPT, Pirpav, Manglore, Chennai, Ennore, Fujairah, Sharjah, Dubai, Abudhabi Mussafah Middle East  

 

Acetylene Gas Cylinder
Acetylene Gas Cylinder
Acetylene Gas Cylinder
Acetylene Gas Cylinder

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumba, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : mail@rxmarine.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarine@gmail.com ( This mail is for supplier only )