ACACIA Confirms to IP Laboratory Chemicals MSDS
| Product Name | RXSOL-10-6500-001 |
| Product Type | ACACIA Confirms to IP |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch Stock Point ::: Mumbai, Kandla, Chennai - Ennore, visakhapatnam, Kolkata, Fujairah
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
Substance / Preparation : ACACIA
CAS No :9000-01-5
Substance.
Contains no other components or impurities which will influence the classification of the product.
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Not classified.
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not classified.
3.2. Label elements
Labelling EC 67/548 or EC 1999/45
Not classified.
Labelling Regulation EC 1272/2008 (CLP)
Not classified.
3.3. Other hazards
Other hazards : The substance does not fulfil the criteria to be identified as PBT
substance or vPvB substance according to Annex XIII of Regulation REACH.
4.1. Description of first aid measures
Inhalation : Assure fresh air breathing. Allow the victim to rest.
Skin contact : Remove affected clothing and wash all exposed skin area with mild soap
and water, followed by warm water rinse.
Eye contact : Rinse immediately with plenty of water. Obtain medical attention if pain,
blinking or redness persist.
Ingestion : Obtain emergency medical attention. Rinse mouth. Do NOT induce vomiting.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use : Not expected to present a significant hazard under
anticipated conditions of normal use.
4.3. Indication of any immediate medical attention and special treatment needed
General information : Never give anything by mouth to an unconscious person. If you
feel unwell, seek medical advice (show the label where possible).
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
Surrounding fires : Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products : Under fire conditions, hazardous fumes will be
present.
5.3. Advice for fire-fighters
Protection against fire : Do not enter fire area without proper protective equipment,
including respiratory protection.
Special procedures : Exercise caution when fighting any chemical fire. Avoid (reject)
fire-fighting water to enter environment.
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders : Equip cleanup crew with proper protection.
Ventilate area.
For non-emergency personnel : Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions : Prevent entry to sewers and public waters. Notify
authorities if product enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
7.1. Precautions for safe handling
Handling : Wash hands and other exposed areas with mild soap and water before eat,
drink or smoke and when leaving work.
Technical protective measures : Provide good ventilation in process area to prevent
formation of vapour.
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep only in the original container in a cool, well ventilated place. Keep
container closed when not in use.
Storage - away from : Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s) : None.
8.1. Exposure controls
Personal protection : Avoid all unnecessary exposure.
• Respiratory protection : Wear approved mask.
• Hand protection : Wear protective gloves.
• Eye protection : Chemical goggles or safety glasses.
• Others : When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits : No data available.
9.1. Information on basic physical and chemical properties
Physical state at 20 °C : Solid.
Odour threshold : No data available.
pH value : Not applicable.
Melting point [°C] : No data available.
Decomposition point [°C] : N/A
Critical temperature [°C] : N/A
Auto-ignition temperature [°C] : N/A
Flammability (solid, gas) : N/A
Flash point [°C] : N/A
Boiling point [°C] : N/A
Initial boiling point [°C] : N/A
Final boiling point [°C] : N/A
Evaporation rate : N/A
Vapour pressure [20°C] : N/A
Vapour pressure mm/Hg : N/A
Vapour density : N/A
Density [g/cm3] : 1.39 - 1.49
Relative density, gas (air=1) : N/A
Relative density, liquid (water=1) : N/A
Solubility in water [% weight] : Soluble in water
Solubility in water : N/A
Log Pow octanol / water at 20°C : No data available.
Solubility : 4.1 - 4.8
Viscosity at 40°C [mm2/s] : N/A
9.2. Other information
Explosive properties : N/A
Explosion limits - upper [%] : N/A
Explosion limits - lower [%] : N/A
Oxidising properties : No data available.
10.1. Reactivity
Reactivity : Not established.
10.2. Chemical stability
Chemical stability : Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions : Not established.
10.4. Conditions to avoid
Conditions to avoid : Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid : Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products : Fumes. Carbon monoxide. Carbon dioxide.
11.1. Information on toxicological effects
Acute toxicity
Based on available data, the classification criteria are not met.
12.1. Toxicity
Toxicity information : Not established.
12.2. Persistence - degradability
Persistence - degradability : Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential : Not established.
12.4. Mobility in soil
Mobility in soil : Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment : The substance does not fulfil the criteria to be
identified as PBT substance or vPvB substance according to Annex XIII of Regulation
REACH.
12.6. Other adverse effects
13.1. Waste treatment methods
General : Avoid release to the environment. Dispose in a safe manner in accordance with local/national regulations.
|
Goods classified for road /rail / |
Sea transport |
YES with |
UN-no |
3082 |
|
Proper shipping name |
Environmentally hazardous liquid |
contains |
(Alkyl (C3-C8) Benzenes) |
|
|
Hazard identification no |
90 Product identification |
|
(UN) no |
3082 |
|
TREMCARD no. |
CEFIC |
90G01 |
|
|
|
Marine pollutant |
Yes |
|
|
|
|
Flash point |
90 ºC |
|
|
|
|
Labelcolour |
White./Black. |
|
|
|
Marine pollutant: No
Transport/Additional information
15.1. Safety, health and environmental regulations/legislation specific for the
substance or mixture
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to
restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject
to authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out.
On the basis of information and experience as well as our present knowledge this guidelines is only safe for handling, use, processing, storage, transport, disposal and discharge; this is not a guarantee or quality of specification. And combination with other products will lost the properties. It is always the responsibility of the user to take all necessary steps to ensure that information given here is read and understood by all who use, handle, dispose of or in any way come in contact with the product. It is not to be considered as a guarantee of the products properties. Disclaim: The information in this MSDS is meant as a description of the safety requirements of our product.
RX MARINE INTERNATIONAL is the supplier of ACACIA in Mumbai, Gandhidham, Kolkata, Visakhapatnam, Chennai & Fujairah, Oman & Muscat.
For any queries contact us:
Product: