Sodium Hypo Chlorite (12-15%) 250 Kg

A 12% solution is widely used in waterworks for the chlorination of water and a 15% solution is more commonly used for disinfection of waste water in treatment plants.  And addition of proper deter [+] Read More...

Sodium hypochlorite used for cleaning and disinfection. RXSOL is major manufacturer and supplier of highly purified chlorine bleach. Balancing of sodium hypochlorite ph also plays an important role during cleaning and other uses of sodium hypochlorite. free alkali containt required more neutrailzer during cleaning operation. All safety norms and physical and chemicals properties and  sodium hypochlorite chemical formula are updated in our MSDS of sodium hypochlorite sheet.


Active Matter:

12 - 15%

Packing Size:
250.00 Kg.(Liq)
For INDIA based requirement mail us at  or you may call us +91 22 65113333 / 65115555 / 65119999  while  For Gulf Middle East email id id  & Tel No.   00971 9 2242524 / 2242534 We are Operational at following location with STOCK POINT Surat, Kandla, Gandhidham, Mundra, Hazira, Tata, Ranchi, Kolkata, Haldia, Buz Buz, Paradip, Vizag ( Visakhapatnam ), Tuticorin, Cochin, Goa, Mumbai, JNPT, Pirpav, Chennai, Ennore, Fujairah, Sharjah, Dubai, Middle East  


Sodium Hypo Chlorite (12-15%) 250 Kg
Also used as a disinfectant and germicide , especially in the sterilization of water. It is also used for making wool unshrinkable and in the manufactire of chloroform. [+] Read More...
Using Procedure:
A weak soln. ( 1.2 % ) is used. For purifying water 0.02 to 0 .2 % volumetric is sufficient for Potable Water Treatment SODIUM HYPOCHLORITE ACTIVE INGREDIENT:        &nbs [+] Read More...
High-test hypochlorite (HTH) is sold for chlorination of swimming pools and contains approximately 30% calcium hypochlorite. The crystalline salt is also sold for the same use; this salt usually contains less [+] Read More...
Technical Specifications:


Parameters Specification Range Typical

Sodium Hypochlorite

as NaOCl (%wt)

12.5 - 13.2 13.0
Available Chlorine (%wt) 11.9 - 12.6 12.4
Available Chlorine (%vol) 14.3 - 15.3 15.0
Available Chlorine grams/liter 143 - 153 150
Excess Caustic (%wt) 0.25 - 0.80 0.30
Specific Gravity @ 60°F 1.197 - 1.220 1.210
pH 12.0 - 13.0 12.50
Iron (Fe) ppm <0.5 0.05
Nickel (Ni) ppm <0.2 0.02
Copper (Cu) ppm <0.2 0.05
Mercury (Hg) ppb 0.001 - 0.003 0.002
Sodium Chloride (NaCl)% <15.0 12.5

Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.


Sodium Hypo Chlorite

Electrolysis Process ( Pure & Concentrated )
This is an improved version of this method, known as the Hooker process, In the process, sodium hypochlorite (NaClO) formed when chlorine is passed into cold and dilute sodium salt solution. It is prepared with minimal separation between the anode and the cathode .The solution must be kept below 40 °C (by cooling coils) to prevent the undesired formation of sodium chlorate and to keep chlorine concentration up to 15%.

Chloro Alkali process ( Chlorine value is less )

E. S. Smith patented a method of sodium hypochlorite production involving electrolysis of brine to produce sodium hydroxide and chlorine gas, which then mixed to form sodium hypochlorite. This is known as the chloralkali process. Both electric power and brine solution were in cheap supply at the time, and various enterprising marketers took advantage of the situation to satisfy the market's demand for sodium hypochlorite. Bottled solutions of sodium hypochlorite were sold under numerous trade names.

Bye Products ::: NEVER use this product as it contains hazardous mixture.

This is bye products of HEAVY / Metal industries. During treatment of main products, huge quantities of SOD. HYPO Chlorite produce, with mixture of many unwanted toxic impurities . This is completely waste of the plant , but sold by traders to satisfy market demands.

Sodium Hypo Chlorite (12-15%) 250 Kg
Sodium Hypo Chlorite (12-15%) 250 Kg