DOSES and Using procedure of Nitrite Borax Corrosion Inhibitor?
GENERAL RECOMMENDATION : ( The dosage chart may be used as a guide to adjust treatment to obtain the optimum level.)
Nitrite (as PPM NO2) 0 100-200 300-600 700-900 1100-1300
RXSOL-40-4001-025 / 1000L 8.0 7.3 7-8 5-7 1.5-3.5
NOTE ::: -- If nitrite level becomes 1440-2400 then doses should be ZERO.
The initial dosage for an untreated system is 8 liters of product per 1000 liters of water. Such a dose will bring nitrite levels over 1200 ppm. Maximum nitrite level is considered to be 2400 ppm. Frequent tests should be carried out in order to maintain pH values within the limit (8.3-10.0), while levels of chloride should be maximum 50 ppm.
Initial dosage for an untreated system is 9 litres of RXSOL-40-4001-025 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL-40-4001-025 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval. Specially designed for use in water systems of internal combustion equipment. pH should be maintained between 8.3 and 10 by the treatment.
RXSOL-40-4001-025 will react with sludge and in most cases, facilitate sludge gradual removal. On badly fouled systems with oil or scale, a prior degreasing by using DEGREASER HEAVY DUTY or descaling by using DEGREASER HEAVY DUTY, SCALE REMOVER LIQUID or SCALE REMOVER POWDER is highly recommended.
• Excellent corrosion inhibitor for cooling water
• Minimises metal oxide deposits
• Protects ferrous and non-ferrous metals
• Compatible with glycol-based antifreeze
• Reduces cleaning & maintenance costs
• Cost effective, easy to apply and use
How to Protect internal combustion engines, compressors, chiller system and DG sets from Corrosion from Nitrite Borax Corrosion Inhibitor Liquid?
Nitrite Borax Corrosion Inhibitor is a unique formulation with highly concentrated liquid cooling treatment compound, ferrous & Non ferrous corrosion inhibitors, antiscalants, dispersant and buffer solution of non carbonate.
Nitrite Borax Corrosion Inhibitor is specialized such a way which can be use in high or low temperature closed cooling water systems for the prevention of corrosion and scale formation in internal combustion engines, compressors, chiller system and DG sets. Also Usefull to Protects all metals including cast iron, mild steels and copper. Recommended ppm levels are easily controlled by standered RXSOL test kit Nitrite / Chloride.
The stable protective microfilm prevents corrosion caused by electrolytic action and the alkaline nature of this product prevents acid attack.
The stability of the added polymers are very useful for water treatment processes. Such polymers with low molecular weights cannot only inhibit calcium, magnesium, and silica scale in cooling towers and boilers, but also help corrosion control by dispersing iron oxide.
FIELDS ::: --- Suitable for use in closed water cooling systems, ice melting systems and transformer cooling systems. The product may be used in all kinds of diesel & petrol engines, compressor or heating cooling water circuits.
Where Nitrie Borax Corrosion Inhibitor can be used?
Prolongs the life of equipment by keeping it scale and corrosion free. Since RXSOL-40-4001-025 is alkaline, it will suppress acid corrosion, which would otherwise result in sever pittings. It improves cooling efficiency by maintaining clean heat transfer surfaces , from Radiators, DG - sets, Closed Cooling and chiller System.
FIELDS ::: --- Suitable for use in closed water cooling systems, ice melting systems and transformer cooling systems. The product may be used in all kinds of diesel & petrol engines, compressor or heating cooling water circuits.
( Used as a corrosion inhibitor for all ferrous and non-ferrous metals found in water systems )
How to Protect internal combustion engines, compressors, chiller system and DG sets from Corrosion from Nitrite Borax Corrosion Inhibitor Liquid?
Nitrite Borax Corrosion Corrosion Inhibitor is a unique formulation with highly concentrated liquid cooling treatment compound, ferrous & Non ferrous corrosion inhibitors, antiscalants, dispersant and buffer solution of non carbonate.
Nitrite Borax Corrosion Inhibitor is specialized such a way which can be use in high or low temperature closed cooling water systems for the prevention of corrosion and scale formation in internal combustion engines, compressors, chiller system and DG sets. Also Usefull to Protects all metals including cast iron, mild steels and copper. Recommended ppm levels are easily controlled by standered RXSOL test kit Nitrite / Chloride.
The stable protective microfilm prevents corrosion caused by electrolytic action and the alkaline nature of this product prevents acid attack.
The stability of the added polymers are very useful for water treatment processes. Such polymers with low molecular weights cannot only inhibit calcium, magnesium, and silica scale in cooling towers and boilers, but also help corrosion control by dispersing iron oxide.
FIELDS ::: --- Suitable for use in closed water cooling systems, ice melting systems and transformer cooling systems. The product may be used in all kinds of diesel & petrol engines, compressor or heating cooling water circuits.
Where Nitrite Borax Corrosion Inhibitor can be used?
Prolongs the life of equipment by keeping it scale and corrosion free. Since RXSOL-40-4001-025 is alkaline, it will suppress acid corrosion, which would otherwise result in sever pittings. It improves cooling efficiency by maintaining clean heat transfer surfaces , from Radiators, DG - sets, Closed Cooling and chiller System.
FIELDS ::: --- Suitable for use in closed water cooling systems, ice melting systems and transformer cooling systems. The product may be used in all kinds of diesel & petrol engines, compressor or heating cooling water circuits.
( Used as a corrosion inhibitor for all ferrous and non-ferrous metals found in water systems )
DOSES and Using procedure of Nitrite Borax Corrosion Inhibitor?
GENERAL RECOMMENDATION : ( The dosage chart may be used as a guide to adjust treatment to obtain the optimum level.)
Nitrite (as PPM NO2) 0 100-200 300-600 700-900 1100-1300
RXSOL-40-4001-025 / 1000L 8.0 7.3 7-8 5-7 1.5-3.5
NOTE ::: -- If nitrite level becomes 1440-2400 then doses should be ZERO.
The initial dosage for an untreated system is 8 liters of product per 1000 liters of water. Such a dose will bring nitrite levels over 1200 ppm. Maximum nitrite level is considered to be 2400 ppm. Frequent tests should be carried out in order to maintain pH values within the limit (8.3-10.0), while levels of chloride should be maximum 50 ppm.
Initial dosage for an untreated system is 9 litres of RXSOL-40-4001-025 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL-40-4001-025 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval. Specially designed for use in water systems of internal combustion equipment. pH should be maintained between 8.3 and 10 by the treatment.
RXSOL-40-4001-025 will react with sludge and in most cases, facilitate sludge gradual removal. On badly fouled systems with oil or scale, a prior degreasing by using DEGREASER HEAVY DUTY or descaling by using DEGREASER HEAVY DUTY, SCALE REMOVER LIQUID or SCALE REMOVER POWDER is highly recommended.
• Excellent corrosion inhibitor for cooling water
• Minimises metal oxide deposits
• Protects ferrous and non-ferrous metals
• Compatible with glycol-based antifreeze
• Reduces cleaning & maintenance costs
• Cost effective, easy to apply and use
Nitrite Level range in the cooling system is 1200 - 2000 PPM NO2. The experiment shows that to avoid any corrosion and cavity nitrite level always should be maintained above 1200 PPM. The initial dosage of Cooltreat is 6 ltr for every ton of cooling water can result in this level. Various Experiment also shows that presence of bacterial contamination in water cooling system also lowers the results of Nitrite LEVEL.
Where is Rigwash used?
Rigwash significantly cleans greasy surfaces of rigs drilling platforms, Oil refineries, Ship cargo vessels and other oily soily greasy equipment in the oil and gas industry. Simply spray Rig Wash liquid with low pressure to the desired surfaces and leave for 0.5 to 3 minutes. Finally, use high-pressure water to rinse the detergent.
RXSOL Rigwash ingredient is 100% Biodegradable and environment-friendly. And RIG WASH also classified as cost effective surfactant cleaner.
Rig wash detergent is available in 1000, 210, 50 and 25 liter packing. And we are one of largest supplier of Rig wash at Kakinada - Visakhapatnam, Chennai - Ennore, Manglore, Mumbai - JNPT, Kandla - Gandhidham, Surat, Kolkata - Haldia, Fujairah - Abu Dhabi, Sharjah - Dubai
Email : mail@rxmarine.com
Apply full strength to remove thick deposits of oil and grease, varnish, floor wax, and to wash rig floor and equipment. Tips to save Rig Wash - Manual Cleaning stripping of excess oil - soil deposited mass always be wise decision to save extra qty required of RIG WASH degreaser. After removal of excess deposition simply apply RIG WASH degreaser by brushing or spraying on surface to be cleaned, And wait for 5 to 10 minutes to get complete emulsification effect then finally rinse / hose off entire surface.
General Cleaning : Use in 1:10 dilution with water for general purpose cleaning.
Soak Method : For smaller items dilute ths solution Use in 1:5 dilution with water and soak for 30 minutes to 3 Hrs, then use pressure sprayers to clean parts item perfectly. Otherwise use in 1:5 dilutionwith kerosene for solvent wash tanks and to clean mechanical parts.
Principal of RIG WASH : RXSOL Rig Wash Cleans effectively rig floors and equipment and degreases shop floors by disperses in petroleum-based fluids and solubilizes in water
RXSOL RIG WASH cleaner can be used to remove grease and oil-based compounds.
RIG WASH cleaner is a cost effective surfactant solution used for surface cleaning applications
Avialable Stock : 25, 50, 210 Ltrs packing at Visakhapatnam - Kakinada, Chennai - Ennore, Kolkatata - Haldia - Paradip, Surat - Kandla - Mundra - Sikka, Mumbai - JNPT. Fujairah - Dubai- Sharjah - Abu Dhabi
Email : mail@rxmarine.com
Where is Rigwash used?
Rigwash significantly cleans greasy surfaces of rigs drilling platforms, Oil refineries, Ship cargo vessels and other oily soily greasy equipment in the oil and gas industry. Simply spray Rig Wash liquid with low pressure to the desired surfaces and leave for 0.5 to 3 minutes. Finally, use high-pressure water to rinse the detergent.
RXSOL Rigwash ingredient is 100% Biodegradable and environment-friendly. And RIG WASH also classified as cost effective surfactant cleaner.
Rig wash detergent is available in 1000, 210, 50 and 25 liter packing. And we are one of largest supplier of Rig wash at Kakinada - Visakhapatnam, Chennai - Ennore, Manglore, Mumbai - JNPT, Kandla - Gandhidham, Surat, Kolkata - Haldia, Fujairah - Abu Dhabi, Sharjah - Dubai
Email : mail@rxmarine.com
RIG WASH LIQUID is popular in Oil Rigs field as a classified alkaline degreaser, Which is free from caustic Alkali. Its concentrated RIG WASH LIQUID formula enable industrial strength degreasing and cleaning product. Rig wash also contains chelating agent which makes to work with all types of water ( Hard or Soft water ). We are one of largest ri wash supplier for Drilling, Oil & Gas industries in India. And our multi location ware house helps our customer to get materials with zero transit time during Shutdown and Turnaround. RX MARINE INTERNATIONAL keeping ready stock of RIG WASH in various size and packing which includes 1000L, 210L, 25Ltrs.
We are RIG WASH supplier in Kakinada, Visakhapatnam, Chennai, Ennore, Kolkata - Haldia, Mumbai, Kandla, Goa, Manglore, Fujairah, Dubai, Sharjah, Abudhabi.
Email : mail@rxmarine.com
RXSOL Teepol is Anionic in nature, which is resulting very good emulsification with most of oily and greasy contents. TEEPOL RXSOL multiple cleaning formula increasing its application field widely. TEEPOL RXSOL not only used in Household, industrial cleaning application but also commonly used in Laboratory, Pharamceutical, MARINE cleaning operation.
We are supplying teepol rxsol widely in INDIA - Middle East and Oman. And we are supplier of RXSOL TEEPOL in Navi Mumbai MIDC, Mumbai, Gandhidham, Mundra, Sikka Jamnagar, Surat, Visakhapatnam, Kolkata, Haldia, Paradip, Fujairah, Dubai, Abudhabi, Ajman, Sharjah Muscat Sohar Oman... http://rxmarine.com/Teepol-RXSOL-Supplier
MSDS of RXSOL TEEPOL and Price : mail@rxmarine.com
Also refer this link : http://rxmarine.com/Marinechemical-supplier
There are many advantages of using Demuslfier manufactured by RX Marine International. We have been in this market for more than 25 years and have developed a modern, cost effective, efficient and remarkable result showing porduct.
Some of the advantages of using RXSOL Demulsifier are:
- Contains surface-active materials
- Separates water from oil
- Free from defilements
- Excellent stability
- Precise chemical composition
- Easy to Handle
Difference between Cement Retarder and Cement Accelerator
Retarding admixtures : Generally used in HOT Weather.
Chemicals : Sodium Gluconate, Gypsum,sugar,strach etc
Retarding admixtures helps and work as water reducing agent and Cemenrt retarder keep concrete workable during placement and delay the initial set of concrete. Chemically retarder slow the setting rate of concrete, are used to counteract the accelerating effect of hot weather on concrete setting. High temperatures often cause an increased rate of hardening which makes placing and finishing difficult. Retarders keep concrete workable during placement and delay the initial set of concrete. Most retarders also function as water reducers and may entrain some air in concrete. Retarder use for increase setting time of cement.
Accelerating admixtures : Generally used in COLD Weather.
Chemicals : Refined silicates, Aluminium sulfate and synthetic plasticizer, calcium chloride etc.
Accelerators make concrete set faster rapidly after mixing with concrete. This product can be added to a concrete batch either immediately before or during mixing to kick the set time of a batch of concrete into high gear and initiate setting time one to three times faster than normal mortar and concrete. On the other hand Accelerating admixtures increase the rate of early strength development, reduce the time required for proper curing and protection, and speed up the start of finishing operations. Chloride Free and Accelerating Compund for Concrete and Mortar. Accelerator is use for reduce setting time.
Accelerating admixtures are especially useful for modifying the properties of concrete in cold weather.