Recirculation Method for ship tank cleaning -
1) First of all heat the remaining oil in tanks .
2) By stripping constantly. flush the tank with sea water,
3) Close all suction and discharge valves .
4) Then make solution Voyage Tank Clean, RXSOL Emulsifier Solvent Degreaser with water with percentage ratio of 2-6% Voyage Tank Clean, RXSOL Emulsifier Solvent Degreaser ( 2 Ltr to 6 Ltrs in 100 Ltr Water ) concentration value can be increase as per cleaning demand and contamination and condition of tank. Circulate cleaning solution via the automatic tank washing system pump and heater to the tank to be cleaned, wherefrom the solution is returned to the chemical solution tank via the stripping line. The same solution can be repeated for 2 - 3 tanks, then new cleaning solution required if same solution repeated for more then 2-3 tanks. Finally after recirculation the tanks should be rinsed thoroughly with sea water or fresh water depending on availability and requirements.
Pre-wash with Hot water ( 50 degrees C) is helpful before cleaning with SEA Voyage Tank CLEAN. This trick will help to remove excess of oil contaminates and also hot water releasing bond between metal and oil contamination. But never follow this step for crude oil, drying and semi-drying oils as these products can reverse cleaning effect with hot water. In this case, prewash with cold water should be applied to remove excess of oil from tank and metal surface area.
Oil Emulsifier based cleaner is best option to clean the Oily Tanks... To know more details about Tank Cleaning chemicals, mail us : mail@rxmarine.com
Sea Voyage Tank clean ORG is blend of higher concentration of emulsifier which can disperse oil in sea water also its solution strength 2-6% can effectively clean Double Bottom Tank. Pl. be note Time, temperature and agitation of chemical solution plays very important role to achieve optimum result. After chemical cleaning the tanks can be rinsed thoroughly with seawater or fresh water depending on availability and requirements.
Email us to get discounted price and tank cleaning tips for TANK CLEAN. mail@rxmarine.com
FAQ 1 :
On Thu, Jan 3, 2019 at 3:49 PM Prasad, M.G.S.R.D - EStIL - CHITRAKONDA wrote:
Dear Sir,
As discussed, below is the brief description of our requirement.
· Need suitable chemicals to descale, remove rust and decrease roughness of the 16” dia pipe internally.
· Pipeline length need to cleaned is around 64 km initially. Can send the estimated quantity of chemicals need to be obtained.
· The chemicals should be water based, so that we can mix in the water and pump through pipeline for its cleaning.
· Using rubber diaphragm positive displacement pumps for the pipeline. So the chemicals should not damage pump rubber components.
· Main material transported in the pipeline is iron ore with solids around 70%.
· Operating pressure in the pipeline in water is around 90 bar.
Kindly submit your techno commercial order along with catalogues and cleaning procedure.
Regards
Thanks & Regards,
Prasad Meesala.G.S.R.D | Manager - O&M, Slurry pipeline | Essar
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Dear Sir,
GD DAY,
Thanks a lot for your email, CLEANING of RUST and scale from metal surface " RXSOL ORG - 4 " is most powerful scale dissolver which have unique features as water soluble as well as fully compatible with rubber component.
This product is easy to use and results even in diluted ratio of 1:100 ( 1 Ltr RXSOL ORG 4 and 100 Ltr Water )
RXSOL ORG -4 unit price is 36 INR / Kg ( Liquid ) + GST
Pl. feel free to ask for further support.
Thanking you
WBRGDS
Silvi
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
FAQ 2 :
On Fri, Jan 4, 2019 at 7:54 AM Prasad, M.G.S.R.D - EStIL - CHITRAKONDA <m_prasad@essarsteel.co.in> wrote:
Dear Sir,
Thank you for your reply.
Also please clarify on below points before proceeding further.
What is the Reaction time of chemical for descaling? Based on the reaction time we can choose the quantity of chemical to be obtained to flush 64 km length of pipeline. Attached is the sample pic showing the level of scaling/rust and surface roughness. This pic is at the discharge end of pump, Scaling intensity may be more while moving away from the pump throughout pipeline. Tuberculation formations were observed in overall length of pipeline which increased roughness. Based on this please suggest the chemical flushing time to remove rust, tubercles and scaling.
· Our pipeline material is Carbon steel of grade API 5L x60. Is the recommended chemical (RXSOL ORG-4) compatible with the based material of pipe? There should not be other effects. Also provide us any of your previous experience in similar application.
· Presently we are using Sodium sulphite & Cobalt sulphate as oxygen scavenger while pumping water. So while using RXSOL ORG-4, can I mix in conjunction with these oxygen scavengers or need to mix only with non-treated water. Pl suggest.
· Is this chemical environment safe, can we dispose as like of water in the dump or flush ponds?
Regards
Thanks & Regards,
Prasad Meesala.G.S.R.D | Manager - O&M, Slurry pipeline
Scindia Road, Nr. Fly Over,Vizag-530004 | Andhra Pradesh | India |
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Dear Sir,
GD DAY,
Thanks for your Email, Pl. find herewith point wise reply...
· What is the Reaction time of chemical for descaling? Based on the reaction time we can choose the quantity of chemical to be obtained to flush 64 km length of pipeline. Attached is the sample pic showing the level of scaling/rust and surface roughness. This pic is at the discharge end of pump, Scaling intensity may be more while moving away from the pump throughout pipeline. Tuberculation formations were observed in overall length of pipeline which increased roughness. Based on this please suggest the chemical flushing time to remove rust, tubercles and scaling.
Ans : Exact cleaning time can be calculated, by getting counter sample of scale from your end. We can do in our LAB scale dissolving experiment. THis will not only help to evaluate timing, but also helps to get required qty for this project.
· Our pipeline material is Carbon steel of grade API 5L x60. Is the recommended chemical (RXSOL ORG-4) compatible with the based material of pipe? There should not be other effects. Also provide us any of your previous experience in similar application.
Ans : RXSOL ORG-4 is compatible with CARBON STEEL, Chemically this is not reacting with steel. And we are supply and exporting this product for various industries and its application.
· Presently we are using Sodium sulphite & Cobalt sulphate as oxygen scavenger while pumping water. So while using RXSOL ORG-4, can I mix in conjunction with these oxygen scavengers or need to mix only with non-treated water. Pl suggest.
Ans : RXSOL ORG-4 is compatible with Sodium Sulphite and Cobalt Sulphate, Only extra ALKALINE materials can't be use with RXSOL ORG-4
· Is this chemical environment safe, can we dispose as like of water in the dump or flush ponds?
Ans : RXSOL ORG-4 can be neutralized at end point and in storage area, before disposal.
Thanking you
WBRGDS
Silvi
If the cooling system is contaminated with oil, fat and other greasy deposits then simply make 100 ltr solution of cold wash with water by the proportion of 10 Ltr Coldwash in to 100 Ltrs water ( or depend on contamination of oil deposits on the surface, cold wash ratio can vary 5 10% in freshwater ). Then circulate emulsion ( prepared solution of the cold wash with water ) for 8 - 12 hrs. And if solution temperature can maintain 50 - 60 degree, then cleaning performance can be increased within a short period of time. Finally, drain all soiled cleaning liquid followed by fresh water until outcome water remains clear.
Cleaning of the cooling system becomes compulsory when system required DESCALING, removal of scale deposits. As oily surface doesn't allow descaler to react with lime deposits.
FAQ 1 :
On Thu, Jan 3, 2019 at 3:49 PM Prasad, M.G.S.R.D - EStIL - CHITRAKONDA wrote:
Dear Sir,
As discussed, below is the brief description of our requirement.
· Need suitable chemicals to descale, remove rust and decrease roughness of the 16” dia pipe internally.
· Pipeline length need to cleaned is around 64 km initially. Can send the estimated quantity of chemicals need to be obtained.
· The chemicals should be water based, so that we can mix in the water and pump through pipeline for its cleaning.
· Using rubber diaphragm positive displacement pumps for the pipeline. So the chemicals should not damage pump rubber components.
· Main material transported in the pipeline is iron ore with solids around 70%.
· Operating pressure in the pipeline in water is around 90 bar.
Kindly submit your techno commercial order along with catalogues and cleaning procedure.
Regards
Thanks & Regards,
Prasad Meesala.G.S.R.D | Manager - O&M, Slurry pipeline | Essar
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Dear Sir,
GD DAY,
Thanks a lot for your email, CLEANING of RUST and scale from metal surface " RXSOL ORG - 4 " is most powerful scale dissolver which have unique features as water soluble as well as fully compatible with rubber component.
This product is easy to use and results even in diluted ratio of 1:100 ( 1 Ltr RXSOL ORG 4 and 100 Ltr Water )
RXSOL ORG -4 unit price is 36 INR / Kg ( Liquid ) + GST
Pl. feel free to ask for further support.
Thanking you
WBRGDS
Silvi
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
FAQ 2 :
On Fri, Jan 4, 2019 at 7:54 AM Prasad, M.G.S.R.D - EStIL - CHITRAKONDA <m_prasad@essarsteel.co.in> wrote:
Dear Sir,
Thank you for your reply.
Also please clarify on below points before proceeding further.
What is the Reaction time of chemical for descaling? Based on the reaction time we can choose the quantity of chemical to be obtained to flush 64 km length of pipeline. Attached is the sample pic showing the level of scaling/rust and surface roughness. This pic is at the discharge end of pump, Scaling intensity may be more while moving away from the pump throughout pipeline. Tuberculation formations were observed in overall length of pipeline which increased roughness. Based on this please suggest the chemical flushing time to remove rust, tubercles and scaling.
· Our pipeline material is Carbon steel of grade API 5L x60. Is the recommended chemical (RXSOL ORG-4) compatible with the based material of pipe? There should not be other effects. Also provide us any of your previous experience in similar application.
· Presently we are using Sodium sulphite & Cobalt sulphate as oxygen scavenger while pumping water. So while using RXSOL ORG-4, can I mix in conjunction with these oxygen scavengers or need to mix only with non-treated water. Pl suggest.
· Is this chemical environment safe, can we dispose as like of water in the dump or flush ponds?
Regards
Thanks & Regards,
Prasad Meesala.G.S.R.D | Manager - O&M, Slurry pipeline
Scindia Road, Nr. Fly Over,Vizag-530004 | Andhra Pradesh | India |
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Dear Sir,
GD DAY,
Thanks for your Email, Pl. find herewith point wise reply...
· What is the Reaction time of chemical for descaling? Based on the reaction time we can choose the quantity of chemical to be obtained to flush 64 km length of pipeline. Attached is the sample pic showing the level of scaling/rust and surface roughness. This pic is at the discharge end of pump, Scaling intensity may be more while moving away from the pump throughout pipeline. Tuberculation formations were observed in overall length of pipeline which increased roughness. Based on this please suggest the chemical flushing time to remove rust, tubercles and scaling.
Ans : Exact cleaning time can be calculated, by getting counter sample of scale from your end. We can do in our LAB scale dissolving experiment. THis will not only help to evaluate timing, but also helps to get required qty for this project.
· Our pipeline material is Carbon steel of grade API 5L x60. Is the recommended chemical (RXSOL ORG-4) compatible with the based material of pipe? There should not be other effects. Also provide us any of your previous experience in similar application.
Ans : RXSOL ORG-4 is compatible with CARBON STEEL, Chemically this is not reacting with steel. And we are supply and exporting this product for various industries and its application.
· Presently we are using Sodium sulphite & Cobalt sulphate as oxygen scavenger while pumping water. So while using RXSOL ORG-4, can I mix in conjunction with these oxygen scavengers or need to mix only with non-treated water. Pl suggest.
Ans : RXSOL ORG-4 is compatible with Sodium Sulphite and Cobalt Sulphate, Only extra ALKALINE materials can't be use with RXSOL ORG-4
· Is this chemical environment safe, can we dispose as like of water in the dump or flush ponds?
Ans : RXSOL ORG-4 can be neutralized at end point and in storage area, before disposal.
Thanking you
WBRGDS
Silvi
Mainly Condensate storage tank is specialized tank to get and store oil after condensation of fossil fuels during production. While the exact properties of any particular condensate tank may vary product wise, but generally used to store a mixture of hydrocarbon gases. After periodic interval of time its cleaning can help to reduce down time. We have one of our successful and powerful product called ORG-3, which is effectively dissolves and emulsify fossil fuels and mixture of hydrocarbon trapped in condensate tank.
We are keeping ready stock of ORG-3 at Fujairah, Mumbai, Chennai, Kolkata, Kandla. Our standard packing of Condensate storage tank cleaner - ORG-3 is 25 Ltr and 210 Ltr. For Middle East requirement pl. drop email at chemicals@dubichem.com while for India's supply use mail@rxmarine.com
Super Dilac Acidic Detergent is a low foaming, high active, non-fuming nitric / phosphoric acid detergent descaler.
Super Dilac is a low foaming, high active, non-fuming nitric / phosphoric acid detergent descaler for use in a wide range of CIP applications in the Food and Beverage industry.
How to USE RXSOL 666 ISO Tank Cleaner?
FAQ : How to USE RXSOL 666 ISO Tank Cleaner?
1> Cleaning the surface of the tank exposed to air for LONG times, also creating issues during cleaning. As OXYGEN from air reacts with oily / chemicals to get oxidized. So SMART way to perform cleaning is ALWAYS keep the container tightly closed, before cleaning the OPERATION.
2> 666 is ACIDIC in nature, So never allow any alkaline materials during cleaning or before cleaning, As resulting in poor effectiveness of 666.
3> Best way to clean any hard or Viscous surface, Directly spray 666 on the surface, from top to bottom. And lock the container for 30 minutes to 2 Hrs for complete emulsification.
#TankCleaner_ManufacturerSupplierKandlaGandhidhamMundraJamnagar
#TankCleaningChemicalManufacturerSupplier
#TankCleaner_FujairahTankTerminal
#TankCleaner_SoharMuscatOman
Dosage Chart for Rock and Roll Cleaning
Fuel Oil Viscositry Centistokes at 50°C
RXSOL-20-2027-210 1000 Lts of water
1st Stage
2nd Stage
Over 320 and sludge tanks
1 litre
1 litre
150 - 300
1 litre
0.75 litre
Up to 50
0.5 litre
…
Physical Properties
Colour
Light brown liquid
Density
In g/cm3 at 15°C: 0.9
Flash Point
Above 70 °C
PACKAGING
Order No
RXSOL-20-2027-210
Size (in litres)
20 , 25 , 35 , 210.
Sea Voyage Clean Tank Cleaning detergent manufacturer and supplier in India, UAE Middle East, Muscat Sohar Oman, Kenya Nairobi Africa.