How Coal remover cleaning property can be enhanced?
Coal Remover is very effective on COAL stains and deposits, But if coal is containing oily residue then mixing of coal Remover with ANY alkaline Detergent must be required. This is due to the oily nature of COAL RESIDUE.
Email us to get discounted price of COAL REMOVER.
#CoalRemover_Supplier
#Coalremover_Manufacturer
#coalcleaningchemical_ShipHoldCleaningChemical
Oily deposits in steam boilers are a result of oil contamination of the feed water. Most often, the source of the oil is some part of the condensate and return system.
Fuel oil and cargo oils may contaminate the condensate via leaks in the oil heaters or tank heating coils. Lubricating oils may be picked up from steam driven machinery.
Oil deposits can be removed from boilers, L.P. steam generators, etc., by circulating a 2-5% solution of Heavy Duty Cleaner (Emulsifier) through the equipment. Heavy Duty Cleaner (Emulsifier) should never be used as an on-line cleaner. All cleaning should be done off-line.
For maximum cleaning efficiency, the cleaning mixture should be heated to 50° - 60°C (122° - 140° F) and maintained at this temperature during the cleaning operation. If adequate heat is not available, effective cleaning can be accomplished at temperatures as low as 25° C (77° F) using additional time. Carbonized oil or coke may require a two-step cleaning process using FOTTM fuel oil treatment followed by Heavy Duty Cleaner.
Heavy Duty Cleaner available in 25 Ltrs packing. And we are most popular Heavy Duty Cleaner manufacturer and supplier in Mumbai, Fujairah, Muscat, Kolkata, Visakhapatnam, Chennai, Ennore, Haldia, Gandhidham
Email : mail@rxmarine.com
1. Is the product for removal of hard water scale.? When applied on the effected areas how much it will be get removed. about thickens of the film or suggest us the right procedure for removal of thick & minor accumulations. also suggest for right application procedure.
Ans : Quantities of descaler is directly depends up on quantities of mineral scale, This product chemically dissolve SCALE. Scale is a composite mixture of mineral deposits which can be dissolve by using descaler. For application and using procedure pl. visit our product manual.
2. Does it harm full for humans.
Ans : This product contain acidic component along with buffer and corrosion inhibitor, So precaution required before handling of this product.
3.Can it will be used in closed rooms like bath rooms & Labs, or you suggest something else for this type of applications.
Ans : This product is without fumes, So it can be use in closed room.
4.We are requesting to get clarify this from concerned technical / chemical person to avoid any hazard.at our end. ::: Before uses of this product, You must read MSDS.
Total dissolved solids in Alkali cleaner - includes all solids present in a Alkali Cleaner. Determined by evaporating in a 105 oC oven for 24 hours to evaporate the liquid solution.
Procedure:
Weigh an evaporation dish to the nearest 0.1 mg. Accurately measure a known volume (as much as will fit without spilling) of your sample into an evaporation dish and place in the 105 oC oven for 24 Hrs. After all of the Liquid has evaporated, let the dish cool in a desiccator, weigh the dish plus the remaining solids and record.
Calculation of solids by differentiating "A" and "B"
A = weight of dried residue + dish after 24 hrs at 105 oC (mg)
B = weight of dish (mg)
Finally, percentage mass can be calculated accordingly.
Alkleen Liquid plays very important role for cleaning of tanks, specially when cargo containing fats and oil. Alkleen Liquid effectively emulsify oily mass with water to get dissolve into water. Due to its non caustic based formula Alkaleen Liquid uses becomes wide and non corrosive towards metal surface. Alkleen liquid formulated with corrosion inhibitor to increase its suitability towards tank metal surface, Chemical expert claims that long duration of CARGO in a tank ionized the metal surface. Any chemicals contact can directly damage the metal surface, So presence of corrosion inhibitor in Alkleen cleaner results protection towards tank surface.
Alkleen Liquid supplier in Ennore - Chennai, Vizag - Visakhapatnam - Gangavaram, kolkata - haldia - Paradip, Mumbai - JNPT, Gandhidham - Kandla - Mundra - Sikka, Fujairah - Dubai- Sharjah - Abu dhabi.
Alkleen Liquid available packing is in 20, 25, 50, 210 Ltr
Alkaline Cleaner helps to emulsify and clean vegetable oil, Fish Oil, Animal Oil and Fatty acid containg cargo from tanks ( Steel and Epoxy )
Email : mail@rxmarine.com
Alkleen Liquid concentrate tank cleaner formula principally developed for emulsification of vegetable, animal and fish oils, drying, semi-drying and non-drying natural oils and fats etc, Alkleen Liquid emulsifying agents and other surfactants are biodegradable and water soluble in nature. Alkleen Tank Cleaner also Can be used for hydrocarbon freeing of cargo tanks.
As we observed that Alkleen powerful emulsification also resulting to clean tank from black to white. Alkleen Liquid emulsify easily oil and grease deposits which helps to clean heavy duty deposited cargo from tank, this is the reason why ALKLEEN LIQUID is popular as a tank cleaner.
Mail us to get specialized technical suggestion and easy delivery of Alkleen Liquid in INDIAN and Middle East Port : alkleenliquid@rxmarine.com
OTHER USES
ALKLEEN conncentrate Liquid also helpful for removing oil, carbon and greasy compounds from steam sides of condensers and heat exchangers, Steam Jennys or steam guns etc... Also effectlvely cleans removing oil from the water side of boilers.
Multi Clean Tank Wash Detergent Using-Procedure:-
First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method:- Spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
**Make sure to take all safety precautions are followed when handling / spraying as other GENERAL TANK CLEANER **
Injection Method:- Not applicable.
Re- Circulation Method:- Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and MULT CLEAN to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
**Use a strainer at the pump stack when circulating any solution.** Tank Lining– Stainless / Epoxy / Phenolic.
What is procedure to cleam Lime from ship hold surfaces?
LIME REMOVER HD is concentrated liquid product specifically engineered to attack, penetrate and remove lime deposit from cargo hold. It is a liquid product designed to Clean and eliminate limestone caustic lime deposits and dry lime stains from cargo.
Best results can obtain on dry surface of LIME. It break down the ionic bond in lime, releasing the lime from any surface to which it has adhered.
Lime Remover HD must be used according to the hold surface area that is to be covered, the extent of contamination, the available downtime and the application method being used. Lime Remover HD is covering 10-12 Squire Meter area.
Using Procedure
I - Spray Method
Spray Method is applicable where spray machine is available, suitable to process chemical solutions, is used with a 50% Lime Remover HD/water solution to SPRAY directly onto the surface area. Then, the solution must be left to act for 15 minutes followed by thorough rinsing using a high–pressure water supply source. After , the surface must be left to dry. The percentage of dilutions may vary depending on the thickness and hardness of the deposited lime.
II – Soaking Method
Soaking is a method where Lime Remover HD is used undiluted and applied with conventional methods such as an elongated thick and hard brush, a hard sponge etc. Once applied, Lime Remover HD must be left to soak for 30 minutes. Rinse with water, and followed by leaving the surface to dry. Usually, this method is applicable to heavily contaminated small and large tank surface areas and installations.
To get more details of Lime wash clenaing chemicals, Please share your querry through our email address mail@rxmarine.com
We are one of largest Lime remover and other hold cleaning detergent manufacturer and supplier in Paradip, Haldia, Kolkata, Hazira, Navlakhi, Kandla, Mundra, Dharamtar, JNPT Mumbai, Fujairah, Muscat, Barka, Chennai, Ennore, Visakhapatnam, Kakinada
Lime Remover available in 25 Ltrs / 50 Ltr / 210 Ltrs packing with Quality protected Sealed container.
Lime Remover also helpful to clean CEMENT deposits.
WhatsApp No : 0091 9821214367 ( Feel free to get direct Technical Support for Lime Remover and many other hold cleaning detergent )
Query :::
Moncy Thomas
Attachments12:51 PM (21-03-2018)
to RXSOL, 123
Dear sir,
Good day
Please note that our last discharging cargo is STEAM (NON-COKING) COAL IN BULK OF INDONESIA ORIGIN, pls confirm the Chemical- Sodium Hypochlorite solution(12%) is for removing coal residue, not cement bulk etc..
Kindly consider your rate and reply us urgently.
Matter is most urgent for us.
Awaiting your prompt and valued reply.
Thanks & Regards
Mr. Moncy Thomas / Jitu
Solution :
GD DAY.
As per our experience and general practises we observed that cleaning of STEAM coke becomes very easy and more effective by following this cleaning method...
1st Step spray Sodium Hypo on the entire surface area then continuously followed by Aquatuff High Foam ( dilution ratio 1 Ltr Aquatuff High Foam with 20 Ltr Water). Chemically Sodium Hypo Soften coal deposited particle, while Aquatuff resulting excessive foam with super detergency cleaning action which is resulting in the more satisfactory result.
Thanking you
WBRGDS
Kiran
Malara Group - Kailash.S
Dear Mr. Tiwari,
Kinldy suggest RXSOL hold cleaning chemicals for below details:
Last cargo: grain/bale
Hold size: approx. 15500 cbm (20m x 18m)
No. of hold: 3
Kindly advice suitable grade of chemical as per above specification & approx. quantity require per hold.
Awaiting yours….
Tks & Brgds,
KAILASH H. SONI
DY.G.M.(ADMIN)
MALARA SHIPPING PVT. LTD.
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Answer :-
RXMARINE.com mail
to Malara, rxmarine.com, a.j
Dear Sir,
GD DAY.
Thanks a lot for your inquiry, SUITABLE and most common product to clean FOOD GRAIN is alkleen Safety Liquid. Which is very effective to clean grain deposited stain and masses. Kindly refer the link to get more information of product http://rxmarine.com/Alkaatuff-emulsifier-liquid-alkaline-ship-cargo-hold-cleaning-marine-chemical-detergent-manufacturer-supplier-exporter
And materials required for Each cargo cleaning is approx 200 Ltr. And to clean all 3 cargo required materials quantity is 600 Ltr.
Stock is available at : http://rxmarine.com/where-to-buy.