CHLORIDE TEST for DRILLING FLUID
Drilling and Completion Fluids
Chlorides
First of all test pH value of Mud, If it shows alkaline then neutralized by using phenolphthalein indicator with Sulfuric Acid. Then titrated with standard silver nitrate solution, using potassium chromate as indicator. The results are reported as parts per million chloride ion, although actually measured in terms of mg Cl ion per 1000 cm3 of filtrate. To determine the chloride content of an oil mud, the sample is diluted with isopropyl alcohol and then mixed with distilled water, neutralized to the phenolphthalein end point, and then titrated in the usual way.
The end point is difficult to detect using the silver nitrate method, and the results depend to some extent on the operator. Titrating with mercuric nitrate, using bromophenol blue as an indicator, is an alternative. The method gives a much sharper end point, which is particularly advantageous when titrating whole mud, especially oil muds.
We are well known name for Mercuric Nitrate supplier, Bromophenol blue supplier, Phenolphthalein supplier, Iso Propyl Alcohol supplier, Silver Nitrate supplier, Potassium Chromate, Distilled water supplier in Mumbai, Gandhidham, Chennai, Visakhapatnam, Kolkata, Fujairah, Sharjah, Ajman, Abudhabi, Dubai, Muscat - Oman.
Antifouling Hull Cleaning agent. specially formulated to Clean boat hull by quickly removing algae, lime, scale and chalking remove those hard to shift stains from fibreglass boats, Hull shaft area. Hull Cleaner uses a unique acid-surfactant blend designed to remove marine growth, hard water stains, rust, and calcium buildup.
Other Valuable Product for Engine room, cleaning and maintenance. Deck and hull. Tank and cargo hold cleaning:
AQUATUFF
METAL BRITE
BOLL CLEAN 2000 CLEANING AGENT
DISCLEANER
ENVIROCLEAN
RUST CONVERTER
AIR COOLER CLEANER
COLD WASH HD
CARBON REMOVER
DESCALING LIQUID
ULTRASONIC CLEANER
SODIUM HYPOCHLORITE (10-15 PCT)
Investigations have shown sodium hypochlorite to be an effective disinfectant having broad applications. Although a number of other disinfectants have been investigated, sodium hypochlorite appears to offer the best mix of low cost, ease of use, safety, and effectiveness in areas where there is enough water and water is not excessively turbid.
Mainly Condensate storage tank is specialized tank to get and store oil after condensation of fossil fuels during production. While the exact properties of any particular condensate tank may vary product wise, but generally used to store a mixture of hydrocarbon gases. After periodic interval of time its cleaning can help to reduce down time. We have one of our successful and powerful product called ORG-3, which is effectively dissolves and emulsify fossil fuels and mixture of hydrocarbon trapped in condensate tank.
We are keeping ready stock of ORG-3 at Fujairah, Mumbai, Chennai, Kolkata, Kandla. Our standard packing of Condensate storage tank cleaner - ORG-3 is 25 Ltr and 210 Ltr. For Middle East requirement pl. drop email at chemicals@dubichem.com while for India's supply use mail@rxmarine.com
From: Reny
Date: Wed, Jan 31, 2018 at 10:51 AM
To: rxmarine.com, dubichem.com
Need a reply
1.Is Biosol cleaner RXSOL-20-2019-025) compatible with Titanium plate and Nitrile gasket?
2.Is Descalex Polymer (RXSOL-40-1048-025) compatible with Titanium plate and Nitrile gasket?
3 If the plate heat exchanger volume is 2797 litres on the sea water side.That's the side where there has been contamination with heavy oil , how many litres of bio sol cleaner and Descaler Polymer do we need to order?
Need your feedback to the above queries
Thanks Regards
Reny
Dubai
General Manager
Gulf Sondex FZCO
Danfoss Heating Segment
Jebel Ali, Dubai – U.A.E
Reply:
Dear Sir,
1.Biosol cleaner RXSOL-20-2019-025 contians oil soluble formula it doesn't effect Titanium plate and Nitrile gasket.
2.Descalex Polymer (RXSOL-40-1048-025) is derivative form or ACIDIC polymer, it doesn't react with Titanium metal and Nitrile gasket
3.Recirculation is best option to clean heat exchanger, And if volume is 2797 litres on the sea water side means same or aditional 30% volume tank required to circulate the liquid. And required percentage of Biosol is 5 - 10 % of total liquid volume which means 100 to 150 Ltr BIOSOL is more then suffiecient to circulate in this case to clean as contaminatied with heavy oil. And after circulation of BIOSOL, remove all contaminated water from heat exchanger and tank. Then take other sea water / fresh water to dose Descaler Polymer, Its dose ratio is completely depends on deposition of scale inside the plate of heat exchanger. The solid mass of mineral deposits approximate mass calculation will help to use proper volume of RXSOL-40-1048-025 Descaler. As per gallon in concentrated form of RXSOL-40-1048-025 has the ability to dissolve approximately 1.5kg of scale mass So 3 to 20 percent of total volume depending on deposition of scaling materials required. 150 Ltr to 600 Ltr descalex polymer can be use to clean scale deposits. After use of RXSOL-40-1048-025 a 0.5% solution of Alkalinity Control infresh water should be used for neutralization.
Regards
Technical Support Team
How to control Algae growth in cooling towers, air conditioning cooling systems, and evaporative condensers?
RXSOL-40-4009-210 MICRO BIOCIDE Cooling Water RXSOL is an organic chlorine releasing microbiocide which will effectively control the growth of algal slimes on cooling Water distribution decks, fill, and basins.
This product is recommended for use in industrial process cooling towers, air conditioning cooling systems, and evaporative condensers. It is particularly recommended for use in systems where algae growth is especially difficult to control.
MICRO BIOCIDE Cooling Water RXSOL manufacturer and supplier in United Arab Emirates Dubai, Abudhabi, Sharjah, Ajman, Fujairah, Muscat BArka, Sohar, Oman.
MiCRObiocide manufacturer and supplier in Surat, Gandhidham, Mumbai, Pune, Nashik, Kolkata, Chennai, Visakhapatnam, Paradip Odisha, Varanashi UP.
#CoolingWaterTreatment_Biocide
#Biocide_ManufacturerSupplier
RXSOL Biocide is completely enviroment friendly and is very effective in killing bateria of water. The excellent formulation of this product does not allow any toxic by products to be formed.
Biocide can be used in the following fields:
- Marine / Industrial circulating cooling water for both open and closed loops ( including food contact )
- Milk & Dairy products processing and packaging plants.
- Wineries, vineyards and breweris plant
- Meat, Seafood, poultary and vegetable processing plants
- Cleaning, sanitising and disinfections of UF & RO membranes
- Waste water treatment ( odour control agent, disinfectant and cleaner )
- Hospital & Health care facilities, veterinary clinics
- Hatcheries and egg processing unit
- Dish and table ware sanitizer
RXSOL Biocide is completely enviroment friendly and is very effective in killing bateria of water. The excellent formulation of this product does not allow any toxic by products to be formed.
Why RXSOL CORROSION INHIBITOR for cooling Water System Required ?
Corrosion damage metal surface by chemical or electrochemical reaction which results failure of equipment with the resultant cost of replacement and plant downtime.
Due to Deposition of CORROSION result fouling in of heat exchanger fouling caused by the accumulation of corrosion products., Heat Transfer efficiency decreases. Which resulting loss of plant efficiency due to loss of heat transfer.
HOW to CONTROL CORROSION in COOLING SYSTEM?
Primary Step : Use calcium carbonate bleanded RXSOL-40-4090-025 to increase alkalinity in the water which results to form a protective film on METAL SURFACE.
Second Step : Remove the corrosive oxygen from the water, either by mechanical or chemical deaeration Oxygen Scavenger RXSOL-50-5023-025. Excess of OXYGENT is mother of CORROSION.
Third Step : Add corrosion inhibitors RXSOL-40-4011-025
Which material is used to protect COPPER METAL in Water System?
Copper Corrosion Inhibitors. The most effective corrosion inhibitors for copper and its alloys are the aromatic triazoles, such as benzotriazole (BZT) and tolyltriazole (TTA).