RXSOL Export quality Demulsifiers is very effective emulsion breakers to separate water in crude oil emulsion. Its excellent performance formulations enable the quick separation of produced water from oil. Acts as a dehydration chemicals.
Chemically RXSOL Demulsifiers reduce the interfacial tension between hydrocarbon and water, which helps to separate water content quickly.
Always Use fresh water for making the cleaning solution, uses of sea water entire heating coils have chances of hard solid salt deposits and salt deposits could become difficult to remove. But if uses of sea water for making the chemical solution is only option then during cleaning operation First, stop the steam in the heating coils at least 30 minutes before stopping recirculation. Finally rinse the tank with fresh water for 5-10 minutes immediately after chemical recirculation.
TSP Used in detergent mixtures, soaps, removing boiler scales, textiles processing, clarifing sugar, paper, water softner, leather tanning, laundering, paint remover,emulsifing fats oils, dairy food processing equipments, metal industrial cleaners.
The most common use of Tri-sodium Phosphate is in cleaning agents.
Tri-sodium Phosphate is used in photographic developers, in clarifying sugar and also in removing boiler scale.
TSP is also used in manufacturing paper, in softening water and in tanning leather
TSP Trisodium Phosphate Anhydrous supplier Oman Muscat, UAE MiddleEast Gulf, Nairobi Kenya
Email ::: mail@rxmarine.com
Why Traffic Film Remover TFR Cleaner ?
Traffic Film Remover TFR Cleaner is easy and effective to use. And safe TFR or the best way to wash your vehicle. Traffic film remover (TFR) products that will result and give your car a brand-new look without damaging its paintwork.
Email us to Get discounted Price for Traffic Film Remover...
Rock and Roll Method at sea Tank cleaning for double bottom tank:
Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.
1) First of all heat the remaining oil in tanks .
2) By stripping constantly. flush the tank with sea water,
3) Close all suction and discharge valves .
4)1st Dose Fill the tanks by ½ to 1 litre sea voyage Tank clean plus per tone of water through pipe or manhole , for 75-80% of capacity of tank to be cleaned.
5) Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.
6) Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7) Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8) Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9) For completion add second dose of Sea Voyage Tankclean, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10) Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11) To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.
One of largest Tank Cleaning Sea Marine Cleaning Chemical Supplier in Mumbai, Kandla, Sikka, Jamnagar, Kolkata, Ennore, Fujairah, Dubai, Abudhabi, Ajman, Sharjah, Muscat, Oman, Canada BC
Email : mail@rxmarine.com
Recirculation Method for ship tank cleaning -
1) First of all heat the remaining oil in tanks .
2) By stripping constantly. flush the tank with sea water,
3) Close all suction and discharge valves .
4) Then make solution Voyage Tank Clean, RXSOL Emulsifier Solvent Degreaser with water with percentage ratio of 2-6% Voyage Tank Clean, RXSOL Emulsifier Solvent Degreaser ( 2 Ltr to 6 Ltrs in 100 Ltr Water ) concentration value can be increase as per cleaning demand and contamination and condition of tank. Circulate cleaning solution via the automatic tank washing system pump and heater to the tank to be cleaned, wherefrom the solution is returned to the chemical solution tank via the stripping line. The same solution can be repeated for 2 - 3 tanks, then new cleaning solution required if same solution repeated for more then 2-3 tanks. Finally after recirculation the tanks should be rinsed thoroughly with sea water or fresh water depending on availability and requirements.
Direct Hand Spraying Method some time becomes necesory for cleaning of heavily contaminated tank. On the otherhand we can also say that expert always selecting hand spray method before going to any other tank cleaning method to make there job easy. Expert shortlisting all tuff and heavily contaminated area and directly spraying neat Sea Voyage Tank clean all over soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation for stubborn deposits. Then they are following other method like direct injection method, Recirculation method, Rock and roll method etc...
Direct Injection Method for Cargo Tanks
Undiluted Sea Voyage Tank clean should be injected at a predetermined rate into the pressure side of the automatic tank cleaning system line on deck by means of an air-operated drum (barrel) pump. Usually an injection rate of 0.1 0.2 liter Sea Voyage Tank clean per 100 liters of tank wash water is sufficient. Cleaning time 2-6 hours. Subsequently rinse with water.
Sea Voyage Tank Cleaner manufacturer and supplier. Email us to get discounted price of marine chemicals : mail@rxmarine.com
Dose value of Sea VOYAGE TANK CLEAN Plus can varies depends up on contamination and deposition of oil on the surface area. For tank cleaning " direct Injection Method " also one of the popular method. In this method, neat Sea VOYAGE TANK CLEAN can be injected directly from the drum through air-operated drum (barrel) pump. During this method this barrel pump can be connected to the pressure side of the automatic tank cleaning system line. Barrel Pump can be fixed at a predetermined rate as an injection rate of 0.1 0.2 liter Sea VOYAGE TANK CLEAN per 100 litres of tank wash water is sufficient. Cleaning time 2-6 hours. Finally wash and rinse the tank with water.
Spraying Method : If specific area of tank are heavily contaminated Use neat Sea VOYAGE TANK CLEAN overall soiled areas. Allow 10-20 minutes for reaction, then rinse with high pressure water hose., Scrubbing will assist the cleaning operation for stubborn deposits. Then above method can be started.
Use Handgloves, Goggles and safety mask before using in Tank. Keep container tightly closed and away from direct heat, fire and sunlight.
Pre-wash with Hot water ( 50 degrees C) is helpful before cleaning with SEA Voyage Tank CLEAN. This trick will help to remove excess of oil contaminates and also hot water releasing bond between metal and oil contamination. But never follow this step for crude oil, drying and semi-drying oils as these products can reverse cleaning effect with hot water. In this case, prewash with cold water should be applied to remove excess of oil from tank and metal surface area.
Oil Emulsifier based cleaner is best option to clean the Oily Tanks... To know more details about Tank Cleaning chemicals, mail us : mail@rxmarine.com
RXSOL Sea Voyage Cleaner ORG is developed marine product to maintain its effectiveness emulsifying action in sea water to disperses the oil - grease particle. Sea Voyage Clean is specialized blend of surfactant, emulsifying agent with solvents to perform cleaning action in double bottom, deep and wing tanks, fuel oils tanks etc... Due to its effectiveness in sea water, Sea Voyage Clean also popular in RIGS oil field sector to clean RIGS PLATFORM as RIG WASH detergent.