How to control Algae growth in cooling towers, air conditioning cooling systems, and evaporative condensers?
RXSOL-40-4009-210 MICRO BIOCIDE Cooling Water RXSOL is an organic chlorine releasing microbiocide which will effectively control the growth of algal slimes on cooling Water distribution decks, fill, and basins.
This product is recommended for use in industrial process cooling towers, air conditioning cooling systems, and evaporative condensers. It is particularly recommended for use in systems where algae growth is especially difficult to control.
MICRO BIOCIDE Cooling Water RXSOL manufacturer and supplier in United Arab Emirates Dubai, Abudhabi, Sharjah, Ajman, Fujairah, Muscat BArka, Sohar, Oman.
MiCRObiocide manufacturer and supplier in Surat, Gandhidham, Mumbai, Pune, Nashik, Kolkata, Chennai, Visakhapatnam, Paradip Odisha, Varanashi UP.
#CoolingWaterTreatment_Biocide
#Biocide_ManufacturerSupplier
RXSOL Biocide is completely enviroment friendly and is very effective in killing bateria of water. The excellent formulation of this product does not allow any toxic by products to be formed.
Biocide can be used in the following fields:
- Marine / Industrial circulating cooling water for both open and closed loops ( including food contact )
- Milk & Dairy products processing and packaging plants.
- Wineries, vineyards and breweris plant
- Meat, Seafood, poultary and vegetable processing plants
- Cleaning, sanitising and disinfections of UF & RO membranes
- Waste water treatment ( odour control agent, disinfectant and cleaner )
- Hospital & Health care facilities, veterinary clinics
- Hatcheries and egg processing unit
- Dish and table ware sanitizer
RXSOL Biocide is completely enviroment friendly and is very effective in killing bateria of water. The excellent formulation of this product does not allow any toxic by products to be formed.
Why RXSOL CORROSION INHIBITOR for cooling Water System Required ?
Corrosion damage metal surface by chemical or electrochemical reaction which results failure of equipment with the resultant cost of replacement and plant downtime.
Due to Deposition of CORROSION result fouling in of heat exchanger fouling caused by the accumulation of corrosion products., Heat Transfer efficiency decreases. Which resulting loss of plant efficiency due to loss of heat transfer.
HOW to CONTROL CORROSION in COOLING SYSTEM?
Primary Step : Use calcium carbonate bleanded RXSOL-40-4090-025 to increase alkalinity in the water which results to form a protective film on METAL SURFACE.
Second Step : Remove the corrosive oxygen from the water, either by mechanical or chemical deaeration Oxygen Scavenger RXSOL-50-5023-025. Excess of OXYGENT is mother of CORROSION.
Third Step : Add corrosion inhibitors RXSOL-40-4011-025
Which material is used to protect COPPER METAL in Water System?
Copper Corrosion Inhibitors. The most effective corrosion inhibitors for copper and its alloys are the aromatic triazoles, such as benzotriazole (BZT) and tolyltriazole (TTA).
How to change fouled cooling water into clear phase ?
Bio-Dispersant effectively cleans and disperse heavily fouled Cooling Water Systems. Fouling by microbiological slimes is reducing overall system efficiency. RXSOL bio dispersant is the powerful and concentrated product to remove and disperse the unwanted deposits, Which is resulting in water clarity. Our dual mechanism of RXSOL-40-4093-210 also effectively controlling oil based fouling and is the ideal solution for use in both re-circulating and once-through cooling water systems.
RXSOL-40-4093-210 is a high-performance cooling water bio-dispersant that incorporates powerful surface active agents. It is scientifically formulated for the treatment of cooling systems including recirculating and once-through cooling water systems.
RXSOL-40-4093-210 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.
RXSOL-40-4093-210 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, teflon, polyethylene, acrylic resin or polypropylene.
Dosage levels for RXSOL-40-4093-210 will be in the range of 1100ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled.
How to change fouled cooling water into clear phase ?
Bio-Dispersant effectively cleans and disperse heavily fouled Cooling Water Systems. Fouling by microbiological slimes is reducing overall system efficiency. RXSOL bio dispersant is the powerful and concentrated product to remove and disperse the unwanted deposits, Which is resulting in water clarity. Our dual mechanism of RXSOL-40-4093-210 also effectively controlling oil based fouling and is the ideal solution for use in both re-circulating and once-through cooling water systems.
RXSOL-40-4093-210 is a high-performance cooling water bio-dispersant that incorporates powerful surface active agents. It is scientifically formulated for the treatment of cooling systems including recirculating and once-through cooling water systems.
RXSOL-40-4093-210 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.
RXSOL-40-4093-210 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, teflon, polyethylene, acrylic resin or polypropylene.
Dosage levels for RXSOL-40-4093-210 will be in the range of 1100ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled.
Biocide can be used in the following fields:
- Marine / Industrial circulating cooling water for both open and closed loops ( including food contact )
- Milk & Dairy products processing and packaging plants.
- Wineries, vineyards and breweris plant
- Meat, Seafood, poultary and vegetable processing plants
- Cleaning, sanitising and disinfections of UF & RO membranes
- Waste water treatment ( odour control agent, disinfectant and cleaner )
- Hospital & Health care facilities, veterinary clinics
- Hatcheries and egg processing unit
- Dish and table ware sanitizer
BILGE COAT is advanced formulation ALKALINE COMPOUNDS to neutralize ACID formed by cargo like SULPHUR and water. RXSOL BILGE COAT neutralizer formula protects bilge lines and bilge wells from corrosion, during voyages when the cargo holds are loaded with Sulphur.
RXSOL ADVANCE BILGE COAT CHEMICALLY neutralize ACID, As RXSOL BILGE COAT specialized with ALKALI FORMULATION with inhibitors and antifoaming agents.
RXSOL BILGE COAT manufacturer and supplier in MUMBAI, Kandla, Chennai, Vizag, Kolkata, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat Sohar Oman, Nairobai, Kenya, Canada.
Email : rxmarinegroup@gmail.com
#BilgeCoat_SupplierIndiaOmanUAE
#BilgCoat_ManufacturerIndiaOmanUAE
Hi Silvi / Aaron 01-04-2018
Good day
Just to make sure, please confirm the supplied hold block are suitable for loading “cargo - bulk formed and/or granular sulphur – group c”
Pleased to hear
Thank you
Regards
::::::::::::::::::::::::::::::::::::
Reply
Dear Sir,
GD DAY.
Hold block is polymer emulsion, Which is unreactive towards most of the corrosive materials including Sulphur compound. Its application on hold surface will give protection for HOLD METAL surface.
when SULPHUR comes in contact with moisture - Water, releasing ACIDIC solution. Which is very corrosive, Its time to time neutralization also helpful to keep hold surface damage free.
For After application of HoldBlock on surface area, When matter comes to load sulphur then uses of Sulphur ACID neutralizer is also a wise decesion ...
Bilge Coat (Sulphur Acid Neutralizer)
RXSOL Bilge Coat is highly effective chemicals and an alkaline Solution for the Bilge Line and well during the carry of cargo as like Sulphur. This Product act as a neutrilizer for the collection of Acidic Bilge Water. Bilge coat is more safer and effective in use compare than other alkaline Materials.
Acts as Acid Neutralizer formed during sulphur voyages.
SKU: RXSOL-22-2209-025
Application:
Dose and Using Procedure
• Use a clean Drum or any plastic tank. Fill the water up to 190 Ltrs and add the RXSOL concentrated Bilge coat 2-4 Ltrs. Stir well and now it is ready RXSOL BILGE COAT SOLUTION to use.
• Pour 15 to 20 litres of RXSOL BILGE COAT SOLUTION directly into each hold sounding pipe from on deck. Replenish each time after the bilge water is pumped out.
For more details... Pl. refer this link http://rxmarine.com/bilge-coat-sulphur-resistance-alkaline