PRODUCT DATA SHEET
H2S TEST STRIP KIT
For rapid detection and confirmation of Salmonella and Citrobacter in potable water
•Easy to perform
•User-friendly
•Screening tests
•Low-cost rapid test
•Suitable for handling by untrained personnel for monitoring of rural drinking water sources
Kit contains
•Glass vial containing H2S test strip
*Store in a dry place, below 25°C and protect from direct Sunlight.
Instructions for use
Carefully open the bottle cap and fill the water sample up to the arrow mark. Quickly re-cap the test bottle and secure it tightly. Shake gently for few minutes to allow the medium to diffuse in water evenly. Incubate at 32 - 37ºC for 18 - 48 hours and take observation.
Observation Broth colour turns to black from initial light amber colour – Salmonella present Water is not suitable for drinking
Principle There is a need for rapid methods to quickly determine the pathogenic bacteria in water other than coliforms. Monitoring microbiological quality of drinking water also needs examination of water samples for presence of bacterialike Salmonella and Citrobactor freundiiusing rapid kits. H2S test strip kit contains media-impregnated paper strip containingall the essential nutrients for the growth of Salmonella and Citrobactor freundii. Presumptively,presence of these bacteriais indicated by H2S production, resulting in colour change of broth to black from initial light amber colour.
Microbiological parameters (Growth promotion test) Culture characteristics observed after inoculation (10-100 CFU) and incubation at 32 - 37°C for 18 – 48 hours.
Mail us : To get H2s discounted price --- mail@rxmarine.com
Test strainsATCCInoculum GrowthColour of the medium
Salmonella typhimurium1402810-100LuxuriantBlack
Citrobacter freundii8090 10-100LuxuriantBlack
Escherichia coli 25922 10-100 Luxuriant No change
Stock Point Mumbai, KandlaChennaiVisakhapatnamKolkata, Fujairah
Hydrogen sulfide formed due to anaerobic decomposition of organic matter in water. Sewage and industrial wastes are other sources of sulfide pollution. Highly toxic, this compound has a characteristic rotten egg odor, which can be detected long before harmful concentrations are reached. H2S vial (Bacteriological ) Kit
, sulfide discolors a detection paper. Results are obtained by comparison of the color
H2S Vial Test Kit is Most economical method for determining hydrogen sulfide content in water samples Uses reliable, cost effective color comparison method.
RXSOL H2S Vial Test kit supplier in Mumbai, Visakhapatanm, Chennai - Ennore, Kolkata - Haldia, Kandla - Gandhidham.
Where to Buy H2S Vial Test Kit :http://rxmarine.com/where-to-buy
What are the characteristics of a good Degreaser? It is a very important question as the asnwer to this question helps the consumers realize if to buy a degreasers or to reject it. Knowing the characteristics of a degreaser is very important as it helps rate a chemical degreaser. RXSOL Degreaser is one of the most demanded degreasers in Mumbai, Gandhidham, Mundra, Kandla, Kolkata, Howrah, Vishakhapatnam, Tuticorin, Chennai, India, UAE, Gulf, Canada. RX Marine International is one of the largest manufatcurers and suppliers of degreasers in Mumbai, Nhava Sheva, JNPT, Maharashtra, India. We also manufacturers and suppliers of Degreasers in Gandhidham, Kandla, Mundra, Bahruch, Kutch, Gujarat.
Know the characteristics of a good degreasers. The best option for you is to buy one of RXSOL Degreasers which are the best degreasers and come under the category of not good but best degreasers. All the characteristics of a great degreaser are present in RXSOL Degreasers. Therefore, instead of looking for degreasers all over the Internet, contact RX Marine International: manufacturer and supplier of best degreasers in India, UAE and Canada. Our humongous customer base has been constantly appreciating the quality of our degreasers and regarding it as one of the best degreasers in the market. Such are the sayings of players from Marine and Industrial chemicals field.
Below mentioned are some of the characteristics of a good degreaser.
Characteristics of a good degreaser :
- It is cost effective, easy to apply and use.
- High emulsification on mineral oils and petroleum based chemicals.
- Safe to use on most metal surfaces, painted surfaces and tank coatings.
- Cleans oil coolers, fuel oil pre heaters and lube oil heat exchangers.
- Removes general oil contamination from machinery and engine room.
- Economical cost effective.
- Used as a multi-purpose degreaser in extremely hard cleaning conditions
Contact us to buy the best degreasers in India, UAE, Canada
Mail us at: 123@rxmarine.com. RX Marine International is one of the largest manfacturers and suppliers of Degreasers in Kolkata, Howrah, Paradip, Haldia, West Bengal, India. RX Marine International also has made a strong foothold in Andhra Pradesh and we are manufacturers and suppliers of Degreasers in Vishakhapatnam. We also manufatcure degreasers in Chennai, Tutcorin. You can even contact us to buy degreasers in Dubai, Fujairah, Sharjah, Oman, Muscat, Kuwait, UAE, Gulf and Canada.
Coldwash is specified marine degreasing and Cleaning Chemicals. Cold wash Cleaning application in Maintenance sector is most popular due to its non hazardous emulsifying agents. Cold wash effectively cleans greasy soiled mass from surface as well as machinery parts.
We are one of popular supplier of cold wash in INDIA - Mumbai, Kandla - Gandhidham, Chennia - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia - Paradip. And in Middle East - Dubai - Fujairah - Sharjah.
We have new advanced formulation of COLD WASH chemicals, Which is more effective and powerful. New Generation Product - NEW ORG ( http://www.rxmarine.com/new-org )
India - mail@rxmarine.com
Middle East : dubichem@rxmarine.com
COLD WASH developed to clean any oily and greasy surface by simple cleaning method. By spraying neat undiluted Coldwash onto the surface of oily greasy components to be cleaned is also one of simple cleaning uses method of cold wash. Cold wash also emulsify and remove most of mineral oils and fats from cargo and storage tanks.
Cold Wash is classified Cleaning Chemicals and degreaser. Due to the presence of heavy-duty emulsifying agent in selected solvents, its penetration power on soiled greasy and oily mass becomes very effective this is the reason why coldwash is one of important part in Cleaning and Maintenance group of chemicals. We selected biodegradable emulsifying agent in COLD Wash to makes handling easy.
We are one of largest cold wash supplier in Mumbai, Kandla - Deen dayal port, Mundra, Surat, Visakhapatnam - Vizag, Gnagavaram, Manglore, Chennai - Ennore, Kolkata - Haldia, Paradip, Fujairah - Dubai - Sharjah.
If the cooling system is contaminated with oil, fat and other greasy deposits then simply make 100 ltr solution of cold wash with water by the proportion of 10 Ltr Coldwash in to 100 Ltrs water ( or depend on contamination of oil deposits on the surface, cold wash ratio can vary 5 10% in freshwater ). Then circulate emulsion ( prepared solution of the cold wash with water ) for 8 - 12 hrs. And if solution temperature can maintain 50 - 60 degree, then cleaning performance can be increased within a short period of time. Finally, drain all soiled cleaning liquid followed by fresh water until outcome water remains clear.
Cleaning of the cooling system becomes compulsory when system required DESCALING, removal of scale deposits. As oily surface doesn't allow descaler to react with lime deposits.
COLD WASH developed to clean any oily and greasy surface by simple cleaning method. By spraying neat undiluted Coldwash onto the surface of oily greasy components to be cleaned is also one of simple cleaning uses method of cold wash. Cold wash also emulsify and remove most of mineral oils and fats from cargo and storage tanks.
Cold Wash is classified Cleaning Chemicals and degreaser. Due to the presence of heavy-duty emulsifying agent in selected solvents, its penetration power on soiled greasy and oily mass becomes very effective this is the reason why coldwash is one of important part in Cleaning and Maintenance group of chemicals. We selected biodegradable emulsifying agent in COLD Wash to makes handling easy.
We are one of largest cold wash supplier in Mumbai, Kandla - Deen dayal port, Mundra, Surat, Visakhapatnam - Vizag, Gnagavaram, Manglore, Chennai - Ennore, Kolkata - Haldia, Paradip, Fujairah - Dubai - Sharjah.
USES:
Deep cleaning of outdoor condenser coils to restore efficiency and increase performance of the system.
DILUTION RATIOS:
Because RXSOL-41-8672-025 is highly concentrated, it must be diluted prior to use. Dilution also improves penetration into the coil and increases product performance. Actual dilution ratios will vary according to the application. The following is intended as a general
guideline:
- Up to 8-10 parts water to 1 part RXSOL-41-8672-025 coil cleaner for light cleaning and brightening, when expanding foam is not required.
- 3-5 parts water to 1 part RXSOL-41-8672-025 coil cleaner on difficult cleaning tasks.
- 1-2 parts water to 1 part RXSOL-41-8672-025 coil cleaner for use as a high foaming,aluminum finned, air cooled condenser coil cleaner.Use the minimum concentration required to accomplish your task.
Note: Do not use RXSOL-41-8672-025 coil cleaner at concentrations greater than 1:1 (less than 1 part water to 1 part RXSOL-41-8672-025 coil cleaner. Rinse the treated surfaces as well as the surrounding area thoroughly after use.
APPLICATION METHODS:
Low pressure, acid resistant tank sprayers are recommended.
Regardless of application method, avoid inhalation of mist or contact of liquid or mist with skin.
SUGGESTED INSTRUCTIONS FOR USE:
- When handling RXSOL-41-8672-025 coil cleaner or any other strong chemical, be sure to wear chemical imperviousgloves,apron and splash goggles.
- Determine required dilution ratio for the specific application. It is recommended to start with a dilution ratio of 10:1 and increase concentration until the desired results are achieved.
- As with mixing all acids, place the desired amount of water into the tank and then add RXSOL-41-8672-025 coil cleaner
- Turn off fans and allow hot coils to cool before applying.
- Using plain water, wet both the condenser coil as well as the area surrounding the equipment. Wetting the coil with water aids in product penetration and performance.
- Apply the properly diluted product to the coil surface. Whenever possible, apply solution from the outlet side of the coil. Allow product to remain on surface, normally 5-10 minutes. Do not allow product to dry on the coil. Note: In extreme cases, application may have to be repeated to achieve desired results.
- If foaming does not occur, check for extreme grease buildup which will slow cleaning process. Foaming may not occur if coil is coated or painted.
- Rinse coils, tools and surrounding area thoroughly after completing the coil cleaning process
USES:
Deep cleaning of outdoor condenser coils to restore efficiency and increase performance of the system.
DILUTION RATIOS:
Because RXSOL-16-1697-005 is highly concentrated, it must be diluted prior to use. Dilution also improves penetration into the coil and increases product performance. Actual dilution ratios will vary according to the application. The following is intended as a general
guideline:
- Up to 8-10 parts water to 1 par tRXSOL COIL CLEANER for light cleaning and brightening, when expanding foam is not required.
- 3-5 parts water to 1 part RXSOL COIL CLEANER for foaming action on difficult cleaning tasks.
- 1-2 parts water to 1 part RXSOL COIL CLEANER for use as a high foaming,aluminum finned, air cooled condenser coil cleaner.Use the minimum concentration required to accomplish your task.
Note: Do not use RXSOL-16-1697-005 at concentrations greater than 1:1 (less than 1 part water to 1 part RXSOL-16-1697-005 ). Rinse the treated surfaces as well as the surrounding area thoroughly after use.
APPLICATION METHODS:
Low pressure, acid resistant tank sprayers are recommended.
Regardless of application method, avoid inhalation of mist or contact of liquid or mist with skin.
SUGGESTED INSTRUCTIONS FOR USE:
- When handling RXSOL-16-1697-005 or any other strong chemical, be sure to wear chemical imperviousgloves,apron and splash goggles.
- Determine required dilution ratio for the specific application. It is recommended to start with a dilution ratio of 10:1 and increase concentration until the desired results are achieved.
- As with mixing all acids, place the desired amount of water into the tank and then add RXSOL-16-1697-005.
- Turn off fans and allow hot coils to cool before applying.
- Using plain water, wet both the condenser coil as well as the area surrounding the equipment. Wetting the coil with water aids in product penetration and performance.
- Apply the properly diluted product to the coil surface. Whenever possible, apply solution from the outlet side of the coil. Allow product to remain on surface, normally 5-10 minutes. Do not allow product to dry on the coil. Note: In extreme cases, application may have to be repeated to achieve desired results.
- If foaming does not occur, check for extreme grease buildup which will slow cleaning process. Foaming may not occur if coil is coated or painted.
- Rinse coils, tools and surrounding area thoroughly after completing the coil cleaning process
USES:
Deep cleaning of outdoor condenser coils to restore efficiency and increase performance of the system.
DILUTION RATIOS:
Because RXSOL-41-8672-025 is highly concentrated, it must be diluted prior to use. Dilution also improves penetration into the coil and increases product performance. Actual dilution ratios will vary according to the application. The following is intended as a general
guideline:
- Up to 8-10 parts water to 1 part RXSOL-41-8672-025 coil cleaner for light cleaning and brightening, when expanding foam is not required.
- 3-5 parts water to 1 part RXSOL-41-8672-025 coil cleaner on difficult cleaning tasks.
- 1-2 parts water to 1 part RXSOL-41-8672-025 coil cleaner for use as a high foaming,aluminum finned, air cooled condenser coil cleaner.Use the minimum concentration required to accomplish your task.
Note: Do not use RXSOL-41-8672-025 coil cleaner at concentrations greater than 1:1 (less than 1 part water to 1 part RXSOL-41-8672-025 coil cleaner. Rinse the treated surfaces as well as the surrounding area thoroughly after use.
APPLICATION METHODS:
Low pressure, acid resistant tank sprayers are recommended.
Regardless of application method, avoid inhalation of mist or contact of liquid or mist with skin.
SUGGESTED INSTRUCTIONS FOR USE:
- When handling RXSOL-41-8672-025 coil cleaner or any other strong chemical, be sure to wear chemical imperviousgloves,apron and splash goggles.
- Determine required dilution ratio for the specific application. It is recommended to start with a dilution ratio of 10:1 and increase concentration until the desired results are achieved.
- As with mixing all acids, place the desired amount of water into the tank and then add RXSOL-41-8672-025 coil cleaner
- Turn off fans and allow hot coils to cool before applying.
- Using plain water, wet both the condenser coil as well as the area surrounding the equipment. Wetting the coil with water aids in product penetration and performance.
- Apply the properly diluted product to the coil surface. Whenever possible, apply solution from the outlet side of the coil. Allow product to remain on surface, normally 5-10 minutes. Do not allow product to dry on the coil. Note: In extreme cases, application may have to be repeated to achieve desired results.
- If foaming does not occur, check for extreme grease buildup which will slow cleaning process. Foaming may not occur if coil is coated or painted.
- Rinse coils, tools and surrounding area thoroughly after completing the coil cleaning process