Recirculation Method for ship tank cleaning -
1) First of all heat the remaining oil in tanks .
2) By stripping constantly. flush the tank with sea water,
3) Close all suction and discharge valves .
4) Then make solution Voyage Tank Clean, RXSOL Emulsifier Solvent Degreaser with water with percentage ratio of 2-6% Voyage Tank Clean, RXSOL Emulsifier Solvent Degreaser ( 2 Ltr to 6 Ltrs in 100 Ltr Water ) concentration value can be increase as per cleaning demand and contamination and condition of tank. Circulate cleaning solution via the automatic tank washing system pump and heater to the tank to be cleaned, wherefrom the solution is returned to the chemical solution tank via the stripping line. The same solution can be repeated for 2 - 3 tanks, then new cleaning solution required if same solution repeated for more then 2-3 tanks. Finally after recirculation the tanks should be rinsed thoroughly with sea water or fresh water depending on availability and requirements.
Direct Hand Spraying Method some time becomes necesory for cleaning of heavily contaminated tank. On the otherhand we can also say that expert always selecting hand spray method before going to any other tank cleaning method to make there job easy. Expert shortlisting all tuff and heavily contaminated area and directly spraying neat Sea Voyage Tank clean all over soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation for stubborn deposits. Then they are following other method like direct injection method, Recirculation method, Rock and roll method etc...
Direct Injection Method for Cargo Tanks
Undiluted Sea Voyage Tank clean should be injected at a predetermined rate into the pressure side of the automatic tank cleaning system line on deck by means of an air-operated drum (barrel) pump. Usually an injection rate of 0.1 0.2 liter Sea Voyage Tank clean per 100 liters of tank wash water is sufficient. Cleaning time 2-6 hours. Subsequently rinse with water.
Sea Voyage Tank Cleaner manufacturer and supplier. Email us to get discounted price of marine chemicals : mail@rxmarine.com
Dose value of Sea VOYAGE TANK CLEAN Plus can varies depends up on contamination and deposition of oil on the surface area. For tank cleaning " direct Injection Method " also one of the popular method. In this method, neat Sea VOYAGE TANK CLEAN can be injected directly from the drum through air-operated drum (barrel) pump. During this method this barrel pump can be connected to the pressure side of the automatic tank cleaning system line. Barrel Pump can be fixed at a predetermined rate as an injection rate of 0.1 0.2 liter Sea VOYAGE TANK CLEAN per 100 litres of tank wash water is sufficient. Cleaning time 2-6 hours. Finally wash and rinse the tank with water.
Spraying Method : If specific area of tank are heavily contaminated Use neat Sea VOYAGE TANK CLEAN overall soiled areas. Allow 10-20 minutes for reaction, then rinse with high pressure water hose., Scrubbing will assist the cleaning operation for stubborn deposits. Then above method can be started.
Use Handgloves, Goggles and safety mask before using in Tank. Keep container tightly closed and away from direct heat, fire and sunlight.
Pre-wash with Hot water ( 50 degrees C) is helpful before cleaning with SEA Voyage Tank CLEAN. This trick will help to remove excess of oil contaminates and also hot water releasing bond between metal and oil contamination. But never follow this step for crude oil, drying and semi-drying oils as these products can reverse cleaning effect with hot water. In this case, prewash with cold water should be applied to remove excess of oil from tank and metal surface area.
Oil Emulsifier based cleaner is best option to clean the Oily Tanks... To know more details about Tank Cleaning chemicals, mail us : mail@rxmarine.com
RXSOL Sea Voyage Cleaner ORG is developed marine product to maintain its effectiveness emulsifying action in sea water to disperses the oil - grease particle. Sea Voyage Clean is specialized blend of surfactant, emulsifying agent with solvents to perform cleaning action in double bottom, deep and wing tanks, fuel oils tanks etc... Due to its effectiveness in sea water, Sea Voyage Clean also popular in RIGS oil field sector to clean RIGS PLATFORM as RIG WASH detergent.
Sea Voyage Tank clean ORG is blend of higher concentration of emulsifier which can disperse oil in sea water also its solution strength 2-6% can effectively clean Double Bottom Tank. Pl. be note Time, temperature and agitation of chemical solution plays very important role to achieve optimum result. After chemical cleaning the tanks can be rinsed thoroughly with seawater or fresh water depending on availability and requirements.
Email us to get discounted price and tank cleaning tips for TANK CLEAN. mail@rxmarine.com
Mud & Silt remover is always be a good decision for Ship Ballast Tank. As its regular uses doesn't allow mud to hardened and make big LUMPS deposition. Its electrostatic forces repels mud particle each other. Due to repulsion forces of electrolyte of MUD AND SILT CONDITIONER Keeps mud in suspension form in side the BALLAST TANKS, this concept helps to Keeps mud in suspension and cleans fouled systems. Removes mud, silt, and sedi-ments from ballast.
Discounted prices of Mud And Silt remover available with us. And We are largest Mud and Silt supplier in JNPT, Nhava SEVA, Mumbai, Pirpav, MUNDRA, Sikka, Kandla - Gandhidham, Vizag - Visakhapatanam - Gnagavaram, Kolkata, Haldia - Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi.
Dear Sir,
Pl. suggest product Tank Cleaner to clean Cracker Fuel Oil which is not water soluble so Hydrocarbon Remover may also be required to complete the cleaning process. This cargo is not considered a good prior cargo for loading other high grade chemicals."
Thanks and Best Regards,
Vinod Nair
Ans :
Dear Sir,
GD DAY.
New ORG tank cleaner is highly effective on BLACK cargo - FUEL OIL. Its cleaning principle is based on emulsifier basis, which is effectively makes OIL deposited particle into water miscible. Its long chain compound penetrates into deposited mass and increases affinity towards water. Pl. review this link http://rxmarine.com/new-org , After using this product if cargo requirement is Hydrocarbon Free then CLEANING process can be repeated by using this prodcut http://rxmarine.com/ballast-tank-cleaner
One more advanced formulation products for same utility is available through this link ...http://rxmarine.com/tank-cleaner-hd
Super Dilac Acidic Detergent is a low foaming, high active, non-fuming nitric / phosphoric acid detergent descaler.
Super Dilac is a low foaming, high active, non-fuming nitric / phosphoric acid detergent descaler for use in a wide range of CIP applications in the Food and Beverage industry.
Na2S2O3xH2 also used for dechlorination. Chlorine residuals can be dechlorinated by the addition of sodium thiosulfate. The amount of dechlorinating agent to be used is specified as 0.1 ml of a 10 percent solution for a 125 ml sample.
Sodium thiosulfate is white colourless crystal solid. RX MARINE INTERNATIONAL is popular chemicals solvent powder supplier in Kolkata, Mumbai, Kandla, Chennai, Visakhapatnam, Fujairah, Dubai, Sharjah, Abu Dhabi.
Email for sodium thiosulfate requirement - INDIA : mail@rxmarine.com
For Gulf requirement mail us at : mail@dubichem.com