How can I clean Engine Room?
Enviro Degreaser can be hand sprayed neat or diluted up to 5 parts water and allow 15 to 20 minutes contact time to penetrate deposits. Finally, wash off with a water jet. The best results will be obtained when wash water is heated to 40-60°C.
Otherwise
Also diluted Enviroclean 1:15 is useful for Platform Mopping.
Enviro Degreaser is available in 5, 10, 20, 25, 50, 210 Ltr packing.
We are Enviro Degreaser supplier in Mumbai, Kandla - Deen dayal Port, Visakhapatnam - Vizag, Chennai - Ennore, Kolkata, Fujairah - Dubai
Nitrite Borax Corrosion Inhibitor is one of classified corrosion inihibitor for cooling water system. Ferrous and Non ferrous metal parts of cooling water system gets corrosion and changes into pitting formation which results in the form of leakage and many more. But presence of balance level of nitrite and borax which is main compenent of Nitrite Borax Corrosion Inhibitor Liquid, effectively control corrosion on metal surface, This is the reason why uses of Nitrite Borax Corrosion Inhibitor liquid is most common in COOLING WATER SYSTEM on the other hand we can say that Nitrite Borax Corrosion Inhibitor Liquid is the ideal corrosion inhibitor for closed heating or cooling systems, such as diesel engines, compressors, process cooling systems, etc.
MSDS and Specification of products, You can email us ::: mail@rxmarine.com
RXSOL-16-1076-020 must be used in open or sufficiently ventilated areas. RXSOL-16-1076-020 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1076-020. Never use RXSOL-16-1076-020 on a running generator or motor.
Never use ELECTROSOL on a WORKING AND Running Motor / Generator area.
USE Electrosol concentrated form only, Never Dilute before application.
Useful to clean all electrical parts and equipment components. Avoid to use on rubber and plastic.
Use in Well Ventillated AREA.
Never USE flame, during usage of ELECTROSOL Electrical Contact Cleaner.
Email us to get marine chemicals and special shipchandler's discounted price for ELECTROSOL Electrical Parts Cleaner ::: marinechemical@gmail.com
RXSOL-16-1076-020 must be used in open or sufficiently ventilated areas. RXSOL-16-1076-020 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1076-020. Never use RXSOL-16-1076-020 on a running generator or motor.
Never use ELECTROSOL on a WORKING AND Running Motor / Generator area.
USE Electrosol concentrated form only, Never Dilute before application.
Useful to clean all electrical parts and equipment components. Avoid to use on rubber and plastic.
Use in Well Ventillated AREA.
Never USE flame, during usage of ELECTROSOL Electrical Contact Cleaner.
Email us to get marine chemicals and special shipchandler's discounted price for ELECTROSOL Electrical Parts Cleaner ::: marinechemical@gmail.com
For General cleaning it Should be diluted ,at the rate of 1-parts RXSOL-16-1007-210 to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend on nature of dirt / contamination . For Heavy deposition , immerse the stainless Steel DISCS in the container with concentrated RXSOL-16-1007-210 for 15 minutes to 3 Hrs. At 50 to 60°C ( Heating is not necessary ) .
After the unit or parts have been satisfactorily cleaned, remove the discs by using RUBBER GLOVES and rinse thoroughly with fresh water. It is recommended that this product is not used on soft metal, Zinc,Tin, Galvanized surfaces or Anodized Aluminium. Then separator discs can be used immediately.
NOTE:-
Recirculation and heating will improves the cleaning action.
Contact us for Factory Sale and Discounted price of Disc Cleaner ::: mail@rxmarine.com
TSP Used in detergent mixtures, soaps, removing boiler scales, textiles processing, clarifing sugar, paper, water softner, leather tanning, laundering, paint remover,emulsifing fats oils, dairy food processing equipments, metal industrial cleaners.
The most common use of Tri-sodium Phosphate is in cleaning agents.
Tri-sodium Phosphate is used in photographic developers, in clarifying sugar and also in removing boiler scale.
TSP is also used in manufacturing paper, in softening water and in tanning leather
TSP Trisodium Phosphate Anhydrous supplier Oman Muscat, UAE MiddleEast Gulf, Nairobi Kenya
Email ::: mail@rxmarine.com
LAC Liquid Alkaline cleaner is specialized tank cleaning marine chemical product to clean ferrous metal surface as well as aluminium alloys. LAC Liquid alkaline cleaner also contains corrosion protective element, which is resulting as a corrosion protective film after cleaning residual. Also LAC Liquid Alkaline Cleaner is highly concetrated product to make cost effective and low consumption during application.
LAC Liquid alkaline Cleaner Product details http://rxmarine.com/lac .
Also
LAC Liquid Alkaline Cleaner Contains silicates and low foam based alkaline detergent, Which make LAC ideal to use with HIGH PRESSURE MACHINE.
LAC Liuid Alkaline solution is suitable for aluminium alloy derivative means LAC can be use as cleaner on aluminum alloys series as 5000, 6000 and 7000
LAC contains ORGANIC SYNDET which makes LAC Liquid Alkaline cleaner compatible with HARD WATER also.
LAC also free from hazardous product like Contains no phosphates, no nitrites or no silicones.
LAC Liquid Alkaline Cleaner is available on discounted price Pl. feel Free to contact us through email to get LAC Product specification and MSDS mail@rxmarine.com
RXSOL MARINE chemical is most popular LAC Liquid Alkaline Cleaner supplier in Mumbai JNPT, MIDC Navi Mumabi, Kandla Gandhidham, Hazira Surat, Visakhapatnam, Gangavaram, Kolkata Haldia, Chennai Ennore, Fujairah Dubai, Sharjah, Ajman, Abudhabi, Muscat Barka Oman
Problem :
Dear Sir,
We are a HDPE pipe manufacturer and we are using many heat exchanger coils. Due to the water hardness of our chilled water system, scales deposits are accumulating in our heat exchanger coil and sometimes blocking it. In this regard, may I ask if you can supply descaling liquid to clean the deposits in our coils during preventive maintenance of our machines.
Appreciate your quick reply.
Regards,
Dario Manlubatan
Operation Manager
::::::::::::::::::::::::
Solution :
Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment. This descaler specifically formulated and developed to rapidly clean mineral scale from passages in water-cooled or heated equipment. It improves Plant Efficiency, Lowers Cost, Conserves Energy, Decreases Down-Time. Pl. click here for more details http://rxmarine.com/Polymer-Descaling-Chemical
scale @ rxmarine
Email : mail@rxmarine.com
RIG WASH LIQUID is popular in Oil Rigs field as a classified alkaline degreaser, Which is free from caustic Alkali. Its concentrated RIG WASH LIQUID formula enable industrial strength degreasing and cleaning product. Rig wash also contains chelating agent which makes to work with all types of water ( Hard or Soft water ). We are one of largest ri wash supplier for Drilling, Oil & Gas industries in India. And our multi location ware house helps our customer to get materials with zero transit time during Shutdown and Turnaround. RX MARINE INTERNATIONAL keeping ready stock of RIG WASH in various size and packing which includes 1000L, 210L, 25Ltrs.
We are RIG WASH supplier in Kakinada, Visakhapatnam, Chennai, Ennore, Kolkata - Haldia, Mumbai, Kandla, Goa, Manglore, Fujairah, Dubai, Sharjah, Abudhabi.
Email : mail@rxmarine.com
Heavy Duty Oil Cleaner is Marine equipment Cleaner that is seriously contaminated with fuel or lubricating oils. Also effectively clean oily contaminated Cooling and Boiler system.
Cleaning Procedure
- Drain the Oily contaminated Cooling / Boiler system and refill with fresh water. With the engine stopped, circulate and heat until the water temperature reaches about 60° C (140° F).
- Add 2% by volume (20 liters/metric ton) Heavy Duty Cleaner (Emulsifier) to the circulating water. Heavy Duty Oil Cleaner (Emulsifier) may be introduced by means of the chemical feed system or added to the expansion tank.
- Circulate water through the system for a minimum of 4 hours.
- After 4 Hours cool to normal draining temperatures. Drain the system and refill with warm water to prevent thermal shock. Recirculate for 1-2 hours. No heating is required during this circulation period. Be sure to overflow the system through the expansion tank to the bilge.
- Drain the cooling water system and wherever possible, inspect the interior. If the system is not completely free of oil, repeat the above procedure.
If medium to heavy rust is present, it can be removed by using treatment or a solution of RXSOL SAFE ACID / DESCALEX POWDER and rock salt. If any sacrificial anodes are present in the system, they must be removed prior to cleaning. After cleaning, the anodes can be replaced