RXSOL Metal Clean Bright is a superior heavy duty and highly concentrated liquid blend of surfactants & organic compounds containing rust penetrating agents , solubilizer and inhibitors. Acts as rust proofing agent for the application of paint or coatings.
RXSOL Metal Clean Bright is specially designed for to remove rust from any steel surface and from brass, copper, stainless steel, aluminum, wood and ceramic surfaces with the least amount of effort and high effeciency.
RXSOL Metal Clean Bright also acts as a surface brightener and acts as rust proofing agent before the application of paint or coatings.
Thus RXSOL Metal Clean Bright completely eradicates the rust for the effecient functioning of the machinery.
We provide RXSOL Metal Clean Brightr in packing of 500 ml, 1 Ltr, 4 Ltr and 25 Ltrs and can be firther modified as per customer requirement.
For any queries contact us through the details provided here.
We have ready stock of our product for our regular customers at our warehouse all over India and the Middle East. You can get the location of our warehouses here.
Did you Know Marine cleaning agent for removal of cabin wall Oxides?
RXSOL-16-1011-210 is UNIQUE and Advanced Formulation to used as Marine cleaning agent for removal of cabin wall Oxides. RXSOL-16-1011-210 Specially designed for removal of rust from any steel surface area and deposits left from the caustic based cargos like caustic soda. Also acts as SURFACE BRIGHTNER.
#MetalCleaner
#MetalBrightner
#RustRemover
#OxideCleaningAgent
#MarineCleaningAgent
#MARINEchemicals
#RXSOLDUBAI
#RXSOLOMAN
#RXSOLMUMBAI
#RXSOLGandhidham
#RXSOLVizag
#RXSOLkolkata
#RXSOLchennai
RXSOL is most popular name in MARINE and Oil Field Chemicals.
Metal Clean Britte is Cargo hold and Tank Rust Stain cleaning detergent chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing.
Before application of Metal Clean Britte, we have to understand its cleaning principal...
In general terms and thumb rule for Metals Britte is MORE RUST required more Metals Britte. Chemically Rust { iron oxide (FeO) } is soluble in pH values below 4.0, . Thus, the oxide (oxygen) dissolves as it is formed instead of depositing on the metal's surface. So it is clear more rust required more Metal clean Britte to get dissolve. In practical if the area is fully rusted corroded then direct Metal Clean Britte can be used to dissolve rust particles, while in light contaminated part Metals Clean Britte can be diluted in between 20 to 70% .
HINTS : MORE RUST required MORE METAL CLEAN RUST DISSOLVING SOLUTION, So before uses try to remove loose RUST PARTICLE, This trick will save lot of CHEMICAL USE.
2nd factor is the time which is directly affecting the cleaning result. If base metal is Aluminium then use Metals Clean Britte concentration 10 to 30% for not more then 5 Minutes. For removal of rust stains on painted or iron surfaces, use 10-30% of Metals Clean Britte soultion for 15-20 minutes. And for heavily rusted and corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20-50%, for 15-40 minutes.
The 3rd important point always be noted, After cleaning of rust from Metals clean Britte all area should be fully rinsed and clean properly with fresh water. And for best long time result to keep rust free surface, Surface can be chemically neutralized with RXSOL-41-8896-025 ( dilution ration 1 Ltr RXSOL-41-8896-025 with 10 Ltr water ). The scientific reason behind that is As With the Rust oxide gone with Metals Clean Britte, the metal surface is in direct contact with the acidic solution, and the corrosion reaction proceeds at a greater rate than it does at higher pH values. For increasing pH values greater than pH 10, the rusting rate seems to fall as pH is increased with help of RXSOL-41-8896-025.(http://www.rxmarine.com/Professional-Heavy-Duty-Alkaline-Cleaner)
To get discounted price of Rust Remover Metal Clean Britte, Email us : mail@rxmarine.com
Did You Know? Rust Dissolving Formula.
In chemical terms, RUST is an oxide of the metal. This can be easily dissolve by specialized advances in chemically detergent formulation.
RXSOL Derusting and metal cleaning chemical not only removes rust from the metal surface but also provide a protective rustproof layer.
RXSOL METAL CLEAN BRIGHT MCB RUST REMOVER chemically clean and dissolves oxide scales & rust from the surface.
RXSOL METAL CLEAN BRIGHT MCB RUST REMOVER chemical used whenever parts contain heavy rust and light oil.
Base: Corrosion Inhibited Phosphoric Acid and other acidic mixture Chemical.
Solubility: Thoroughly soluble in water.
Color: Colourless.
DOSE Concentration: One part of the chemical is diluted with three parts of water. Dilution depends on the amount of rust present.
Temperature: The chemical is used cold.
Coverage Yield: 250 - 300 Sq. Ft. per liter.
Rust Dissolver, Metal Cleaner, METAL CLEAN BRIGHT MCB RUST REMOVER, RUST Cleaner manufacturer and supplier in Mumbai, Gandhidham, Chennai, Visakhapatnam, Kolkata, Haldia, Ajman, Dubai, Sharjah, Fujairah, Abudhabi, Muscat, Oman, Canada, BC
Available packing of Rust Cleaner, METAL CLEAN BRIGHT MCB RUST REMOVER, Rust Stain Remover Cleaner is 1 Ltr, 4 Ltr, 25 Ltrs packing
Mail us to get Discounted sale price of Rust Remover METAL CLEAN BRIGHT MCB RUST REMOVER: mail@rxmarine.com
Wet down entire surface with neat Metalic Brightner Eco Rust Clean and allow to dry. Second wash may be necessary if Surface should have a grey/white appearance when the Metalic Brightner Eco Rust Clean is dry. Steel surfaces will have a resistance to rust and will render a good base for paint.
Regular Metal Cleaning and Rust removing helps to maintain good condition of instrument and metal surface area. Metal Cleaning and brite shining also gives good working atmosphere to work manforce.
Metal Cleaning and for brightning of metal surface available with us in various size and packing of 500 ml, 1 Ltr, 4 Ltr and 25 Ltrs pack.
Mail us to get factory sale price of rust cleaing chemicals Metal Clean Bright : mail@rxmarine.com
Rust cleainng Detergent is also called Metal Clean Bright and Metal rust dissolving brite chemicals.
Rust Cleaning Agent Metal Clean Bright manufacturer and supplier in Mumbai, Navi Mumbai Maharastra, Gujrat Kandla Surat Hazira, Jamnagar, Sikka, Mundra, Navlakhi port, Visakhapatnam, Gangavaram Andhra Pradesh, Chennai Ennore Tamilnadu, Kolkata Haldia Westy Bengal, Varanasi, Fujairah Dubai, Sharjah, Ajman, Abudhabi, Muscat Oman
Rig wash is a very easy to use product. The procedure to use Rig wash can be briefly stated as below:
Can be used through hot or cold pressure washing machines to penetrate, loosen and flush away hardened grease, dirt and grime.
Apply the solution from the spray lance working upwards. Always test first with small area for the best dilution rate.
( General terms 20-50 % with fresh water )
Powerful and fast emulsifier to remove heavy deposits of oil, dirt and grease from concrete or metal surfaces, vessel bilge decks, engine room and drill floor etc. Its High penetration formula deep into recesses and crevice of equipment and machinery to chase out soils without disassembling. The resultant run-off will not harm tarmac or asphalt and painted surfaces.
Lime dissolver/remover/cleaner is the new generation and advanced formulatory product to clean Lime without mechanical actions. Lime dissolver helps to save manpower as well as time to clean the lime deposit. A few common methods to use lime remover are:
I - Spray Method
Spray Method is applicable where a high–pressure machine, suitable to process chemical solutions, is used with a 50% Lime Remover HD/water solution to inject directly onto the surface area. Then, the solution must be left to act for 15 minutes followed by thorough rinsing using a high–pressure water supply source. After , the surface must be left to dry. The percentage of dilutions may vary depending on the thickness and hardness of the deposited lime.
II – Soaking Method
Soaking is a method where Lime Remover HD is used undiluted and applied with conventional methods such as an elongated thick and hard brush, a hard sponge etc. Once applied, Lime Remover HD must be left to soak for 30 minutes. Rinse with water, and followed by leaving the surface to dry. Usually, this method is applicable to heavily contaminated small and large tank surface areas and installations.
We have ready stock of Lime Remover at our stockpoints in Mumbai,Pirpaw, Dharamtar, Kandla, Chennai - Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Fujairah, Muscat, Kenya, Canada, Paradip, Budge Budge port. Lime Remover is available with us on factory sale . Contact us to get the discounted price on Lime Remover.
To get special price on lime remover for ship chandlers, shipping agents use CODE: SHIPLIME in the subject line of your email.
Email: mail@rxmarine.com
#limeremover_oman
#limeremover_india
#limeremover_uae
#limeremover_canada
#limeremover_kenya
It is highly concentrated and powerful penetrating agents materials which is effectively react with lime to loosen the bonding strength . Best results can obtain on dry surface of LIME. It break down the ionic bond in lime, releasing the lime from any surface to which it has adhered.
This liquid mixture specifically designed to deal with hard cases of lime cargo deposits or dry lime stains. Its proven advantage is the provision of immediate penetration and complete dissolution of lime, the result being a thorough cleaning.
Lime Remover HD must be used according to the hold surface area that is to be covered, the extent of contamination, the available downtime and the application method being used. Lime Remover HD is covering 10-12 Squire Meter area.
Using Procedure
I - Spray Method
Spray Method is applicable where a high–pressure machine, suitable to process chemical solutions, is used with a 50% Lime Remover HD/water solution to inject directly onto the surface area. Then, the solution must be left to act for 15 minutes followed by thorough rinsing using a high–pressure water supply source. After , the surface must be left to dry. The percentage of dilutions may vary depending on the thickness and hardness of the deposited lime.
II – Soaking Method
Soaking is a method where Lime Remover HD is used undiluted and applied with conventional methods such as an elongated thick and hard brush, a hard sponge etc. Once applied, Lime Remover HD must be left to soak for 30 minutes. Rinse with water, and followed by leaving the surface to dry. Usually, this method is applicable to heavily contaminated small and large tank surface areas and installations.
We are manufacturers and suppliers of Lime Remover. We have ready stock of Lime Remover at our stockpoints in Mumbai,Pirpaw, Dharamtar, Kandla, Chennai - Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Fujairah, Muscat, Kenya, Canada, Paradip, Budge Budge port. RXSOL Lime remover comes in the packing of 220ltrs, 50ltrs, 25ltrs. Lime Remover is available with us on factory sale . Contact us to get the discounted price on Lime Remover.
To get special price on lime remover for ship chandlers, shipping agents use CODE: SHIPLIME in the subject line of your email.
Email: mail@rxmarine.com
#limeremover_oman
#limeremover_india
#limeremover_uae
#limeremover_canada
#limeremover_kenya
Lime dissolver/remover/cleaner is the new generation and advanced formulatory product to clean Lime without mechanical actions. Lime dissolver helps to save manpower as well as time to clean the lime deposit. A few common methods to use lime remover are:
I - Spray Method
Spray Method is applicable where a high–pressure machine, suitable to process chemical solutions, is used with a 50% Lime Remover HD/water solution to inject directly onto the surface area. Then, the solution must be left to act for 15 minutes followed by thorough rinsing using a high–pressure water supply source. After , the surface must be left to dry. The percentage of dilutions may vary depending on the thickness and hardness of the deposited lime.
II – Soaking Method
Soaking is a method where Lime Remover HD is used undiluted and applied with conventional methods such as an elongated thick and hard brush, a hard sponge etc. Once applied, Lime Remover HD must be left to soak for 30 minutes. Rinse with water, and followed by leaving the surface to dry. Usually, this method is applicable to heavily contaminated small and large tank surface areas and installations.
We have ready stock of Lime Remover at our stockpoints in Mumbai,Pirpaw, Dharamtar, Kandla, Chennai - Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Fujairah, Muscat, Kenya, Canada, Paradip, Budge Budge port. Lime Remover is available with us on factory sale . Contact us to get the discounted price on Lime Remover.
To get special price on lime remover for ship chandlers, shipping agents use CODE: SHIPLIME in the subject line of your email.
Email: mail@rxmarine.com
#limeremover_oman
#limeremover_india
#limeremover_uae
#limeremover_canada
#limeremover_kenya