Antifouling Hull Cleaning agent. specially formulated to Clean boat hull by quickly removing algae, lime, scale and chalking remove those hard to shift stains from fibreglass boats, Hull shaft area. Hull Cleaner uses a unique acid-surfactant blend designed to remove marine growth, hard water stains, rust, and calcium buildup.
Other Valuable Product for Engine room, cleaning and maintenance. Deck and hull. Tank and cargo hold cleaning:
AQUATUFF
METAL BRITE
BOLL CLEAN 2000 CLEANING AGENT
DISCLEANER
ENVIROCLEAN
RUST CONVERTER
AIR COOLER CLEANER
COLD WASH HD
CARBON REMOVER
DESCALING LIQUID
ULTRASONIC CLEANER
SODIUM HYPOCHLORITE (10-15 PCT)
Alkaline High foam ship hold cleaning detergent Cleaner is so important during Ship Hold Cleaning?
Alkaline High foam ship hold cleaning detergentis alkaline in nature which neutrilizes the acidic residue created due to the presence of moisture and products like coal, sulphur, salt etc. And emulsification effect of aquaatuff makes alll oil stain water soluble. It means Alkaline High foam ship hold cleaning detergent major role is to neutralize the acidic residue and emulsifying Oil residue. One more important feature of Aquaatuff high foam results in the formation of dense foam with high-pressure machines, which can easily be applied even on vertical surfaces.
Alkaline High foam ship hold cleaning detergent - Acts as an Acid Neutralizer - Useful for coal, Sulfur, Salt as its residue when in contact with water, is acidic in nature which directly damages the painted and metal surfaces.
Alkaline High foam ship hold cleaning detergent - Acts as an Oil residue Emulsifier - Useful for removal of coal and oily residue.
Alkaline High foam ship hold cleaning detergent - Results in Dense foam - Can be applied on the vertical surface for long duration.
Alkaline High foam ship hold cleaning detergentis absolutely free along with the purchase of slip coat - Hold block ( Pre load ) materials. Aquaatuff High foam Free 1000 Ltr with the purchase of 1000 ltrs Slip Coat Plus is available at Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf
The largest supplier of Alkaline High foam ship hold cleaning detergent in Asia ( India and Middle East). More details of Alkaline High foam ship hold cleaning detergent like MSDS and Using procedure of will be available through our email mail@rxmarine.com
Alkleen Liquid plays very important role for cleaning of tanks, specially when cargo containing fats and oil. Alkleen Liquid effectively emulsify oily mass with water to get dissolve into water. Due to its non caustic based formula Alkaleen Liquid uses becomes wide and non corrosive towards metal surface. Alkleen liquid formulated with corrosion inhibitor to increase its suitability towards tank metal surface, Chemical expert claims that long duration of CARGO in a tank ionized the metal surface. Any chemicals contact can directly damage the metal surface, So presence of corrosion inhibitor in Alkleen cleaner results protection towards tank surface.
Alkleen Liquid supplier in Ennore - Chennai, Vizag - Visakhapatnam - Gangavaram, kolkata - haldia - Paradip, Mumbai - JNPT, Gandhidham - Kandla - Mundra - Sikka, Fujairah - Dubai- Sharjah - Abu dhabi.
Alkleen Liquid available packing is in 20, 25, 50, 210 Ltr
Alkaline Cleaner helps to emulsify and clean vegetable oil, Fish Oil, Animal Oil and Fatty acid containg cargo from tanks ( Steel and Epoxy )
Email : mail@rxmarine.com
If we can understand the composition of petcoke, then its cleaning becomes easy and smooth. Chemically PET coke is heavy oil residue in solid form, So for cleaning of heavy and hard deposition of petcoke, its softness must be required. Coldwash HD ( For better result can be used more powerful product RXSOL ORG3 ) easily penetrate in PET COKE residue and its cleaner, emulsifier and much more reacts with coke deposition to make a water-soluble emulsion. Then use water with the high-pressure machine, if water temperature can maintain 50 - 60 degree, then cleaning performance result can be achieved.
If the ship hold surface is contaminated with oil, fat and other greasy deposits then simply spray cold wash ( or RXSOL ORG3, more powerful ) on surface area and leave to get dissolved fully. Then after 20 minutes to 1 Hrs apply water with high-pressure machine And if solution temperature can maintain 50 - 60 degree, then cleaning performance can be increased.
Note::: After spot cleaning of pet coke, Entire hold should be wash with alkaline high foam detergent cleaner RX TUFF High foam. ( http://www.rxmarine.com/rx-tuff-high-foam )
Suggestion: Above suggested method is useful for SPOT cleaning, where petcoke is heavily deposited. As Cold Wash or RXSOL ORG3 price is costlier than any alkaline high foam cleaner. At present, our unit price for RXSOL ORG3 is 2 US$/ Ltr + GST, While Alkaline High foam cleaner price is 1 US$ / Ltr
RXSOL ORG3 and all ship hold cleaning related products are easily available at our all Indian and Middle East coastal major port which includes Kolkata - Dhamra - Haldia - Paradip, Vizag Visakhapatnam - Gangavararm - Kakinada, Gandhidham - Kandla - Mundra Navlakhi- jakhau, Surat - Hazira, Mumbai - Dharmatar, Nhava Seva - JNPT, Chennai - Ennore - Krishnapatnam, Fujairah - Mina Zeyad - Dubai - Sharjah
For Middle East mail us directly this link to get discounted price of coldwash : mail@dubichem.com
For India : mail@rxmarine.com
The principal behind cleaning of CARGO hold...
The 1st segment to clean and neutralize coal residue :
Coal contain sulphur and many more others materials which is resulting corrosive effect on metal and painted surface. In chemical terms its proper cleaning means not only removal of its deposit to make surface clear and bright, But chemically neutralization effect also required. Coal remover having chemical neutralization and cleaning formula, This product can be mixed with Alkaline safety liquid in open drums / Tanks as follows :::
1st of all take 100 Ltr COAL remover and mix with 80 Ltr water then add 20 Ltr alkaline safety liquid in drum. Spray this solution on entire surface area, And then use high pressure machine to achielve high dense foam to clean vertical surface of hold effectively. On heavily deposited spotted area This solution can apply directly to get emulsification of solid deposited mass easily.
2nd segment to prepare hold up to Grain standard :
After completion 1st step, dilute alkaline safety liquid again with water and sprayed diluted solution on cargo hold. Use high pressure machine water followed by fresh water rinsing will result cargo hold for Grain loading standard.
Note : Rusted and paint scale Area / part cleaning must required before using of any cleaner including 1st segment suggestion. For RUST REMOVING our product code is ( RXSOL-16-1088-025 ) and for Paint removing chemicals our code is RXSOL-18-1013-025
General cleaning tips :
Preparing Cargo Holds for loading Grain depends on the previous cargo.
1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames, beams, girders, and other structure.
2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds, Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.
3. There should not be traces of live & dead insect & weevils.
4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge cover needs to be grain tight but not watertight.
5. Bilge well should be cleaned of previous cargo dray and odour free.
6. Bilge suction should be operational at all the times.
Removal of cargo residue:
Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept, scrapped & collected in a drum. Attention to be given
• Australian ladder and its platforms and stanchions
• Beams and girders under cross decks
• Frames, beams, girders, and other structure
• Large pipes holding brackets behind the pipes
Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member
Loose Rust & Paint Scale:
A sharp hand scraper shall be used to take off the peeling rust & paint scale
Special attention to following areas:
• Australian ladder and its platforms, hand rails and stanchions
• Australian ladder and its platforms and stanchions
• Beams and girders under cross decks
• Frames, beams, girders, and other structure
• Large pipes holding brackets behind the pipes
• Hatch coamings and under hatch covers
• Booby hatches & cover
Tank top loose rust
Tank top should be free of loose rust and cargo residue
Any rust which can be scraped by hand scrapers should be removed.
The tank top should be rinsed with fresh water
Cleanliness of cargo hold bilges
Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.
The filter (Rose Box) must be cleaned thoroughly
The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water
How Coal remover cleaning property can be enhanced?
Coal Remover is very effective on COAL stains and deposits, But if coal is containing oily residue then mixing of coal Remover with ANY alkaline Detergent must be required. This is due to the oily nature of COAL RESIDUE.
Email us to get discounted price of COAL REMOVER.
#CoalRemover_Supplier
#Coalremover_Manufacturer
#coalcleaningchemical_ShipHoldCleaningChemical
Oily deposits in steam boilers are a result of oil contamination of the feed water. Most often, the source of the oil is some part of the condensate and return system.
Fuel oil and cargo oils may contaminate the condensate via leaks in the oil heaters or tank heating coils. Lubricating oils may be picked up from steam driven machinery.
Oil deposits can be removed from boilers, L.P. steam generators, etc., by circulating a 2-5% solution of Heavy Duty Cleaner (Emulsifier) through the equipment. Heavy Duty Cleaner (Emulsifier) should never be used as an on-line cleaner. All cleaning should be done off-line.
For maximum cleaning efficiency, the cleaning mixture should be heated to 50° - 60°C (122° - 140° F) and maintained at this temperature during the cleaning operation. If adequate heat is not available, effective cleaning can be accomplished at temperatures as low as 25° C (77° F) using additional time. Carbonized oil or coke may require a two-step cleaning process using FOTTM fuel oil treatment followed by Heavy Duty Cleaner.
Heavy Duty Cleaner available in 25 Ltrs packing. And we are most popular Heavy Duty Cleaner manufacturer and supplier in Mumbai, Fujairah, Muscat, Kolkata, Visakhapatnam, Chennai, Ennore, Haldia, Gandhidham
Email : mail@rxmarine.com
1. Is the product for removal of hard water scale.? When applied on the effected areas how much it will be get removed. about thickens of the film or suggest us the right procedure for removal of thick & minor accumulations. also suggest for right application procedure.
Ans : Quantities of descaler is directly depends up on quantities of mineral scale, This product chemically dissolve SCALE. Scale is a composite mixture of mineral deposits which can be dissolve by using descaler. For application and using procedure pl. visit our product manual.
2. Does it harm full for humans.
Ans : This product contain acidic component along with buffer and corrosion inhibitor, So precaution required before handling of this product.
3.Can it will be used in closed rooms like bath rooms & Labs, or you suggest something else for this type of applications.
Ans : This product is without fumes, So it can be use in closed room.
4.We are requesting to get clarify this from concerned technical / chemical person to avoid any hazard.at our end. ::: Before uses of this product, You must read MSDS.
Total dissolved solids in Alkali cleaner - includes all solids present in a Alkali Cleaner. Determined by evaporating in a 105 oC oven for 24 hours to evaporate the liquid solution.
Procedure:
Weigh an evaporation dish to the nearest 0.1 mg. Accurately measure a known volume (as much as will fit without spilling) of your sample into an evaporation dish and place in the 105 oC oven for 24 Hrs. After all of the Liquid has evaporated, let the dish cool in a desiccator, weigh the dish plus the remaining solids and record.
Calculation of solids by differentiating "A" and "B"
A = weight of dried residue + dish after 24 hrs at 105 oC (mg)
B = weight of dish (mg)
Finally, percentage mass can be calculated accordingly.
Alkleen Liquid plays very important role for cleaning of tanks, specially when cargo containing fats and oil. Alkleen Liquid effectively emulsify oily mass with water to get dissolve into water. Due to its non caustic based formula Alkaleen Liquid uses becomes wide and non corrosive towards metal surface. Alkleen liquid formulated with corrosion inhibitor to increase its suitability towards tank metal surface, Chemical expert claims that long duration of CARGO in a tank ionized the metal surface. Any chemicals contact can directly damage the metal surface, So presence of corrosion inhibitor in Alkleen cleaner results protection towards tank surface.
Alkleen Liquid supplier in Ennore - Chennai, Vizag - Visakhapatnam - Gangavaram, kolkata - haldia - Paradip, Mumbai - JNPT, Gandhidham - Kandla - Mundra - Sikka, Fujairah - Dubai- Sharjah - Abu dhabi.
Alkleen Liquid available packing is in 20, 25, 50, 210 Ltr
Alkaline Cleaner helps to emulsify and clean vegetable oil, Fish Oil, Animal Oil and Fatty acid containg cargo from tanks ( Steel and Epoxy )
Email : mail@rxmarine.com