TestFAQ Question answer....
Here's a complete and practical guide on how to use a RXSOL Heavy Duty Degreaser, especially for Industrial, Marine, and Engine cleaning applications:
What is a Heavy Duty Degreaser?
A Heavy Duty Degreaser (like RXSOL DEGREASER HD) is a powerful alkaline or solvent-based cleaner formulated to remove:
Grease
Oil
Carbon residues
Fuel and tar deposits
Heavy dirt and grime
Where You Can Use RXSOL Heavy Duty Degreaser:
Engine rooms
Ship decks and bilges
Industrial floors
Workshop equipment
Cargo hold cleaning
Oil-stained concrete and machinery
How to Use RXSOL HEAVY DUTY DEGREASER?
Step-by-Step Instructions:
Dilution (if required):
For heavy contamination: use undiluted or 1:1 with water
For general cleaning: 1:5 to 1:20 (chemical:water) depending on surface and soil level
RXSOL HEAVY DUTY DEGREASER Application Methods:
Spray, brush, or mop directly onto the greasy surface, Can also be applied using a foam gun or pressure washer
Soaking Time:
Allow the degreaser to sit for 5–15 minutes
For thick grease or carbon, give it more dwell time but don’t let it dry
Agitate (Optional):
Scrub with a brush for stubborn areas to enhance effectiveness
Rinse:
Rinse thoroughly with high-pressure water (freshwater or hot water for best results)
Precautions:
Use gloves, eye protection, and protective clothing
Do not use on aluminum or painted surfaces unless confirmed safe (some formulas can dull them)
Store in a cool, dry place, away from direct sunlight
Tip:
For engine parts or machinery, soak smaller parts in a degreaser bath, then rinse and dry thoroughly.
#HeavyDutyDegreaser_ManufacturerSupplier
#HeavyDutyDegreaser_DubaiSharjahAjmanABudhabiFujairah
#HeavyDutyDegreaser_MuscatBarkaSoharOman
#HeavyDutyDegreaser_MumbaiKandlaSuratKolkataVisakhapatnamChennai
How to control of microbial biofilms, bacteria, algae, and fungi in cooling water system?
For the control of microbial biofilms, bacteria, algae, and fungi, add MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 in recirculating water cooling towers, industrial recirculating closed loop water cooling systems, brewery pasteurizer and can warmer systems. Add MICRO BIOCIDE Cooling Water RXSOL-40-4009-025 at some point in the system to insure uniform mixing.
CARGO HOLD CLEANING CHEMICAL FOR CLEANING COAL AND PET COKE CARGO CLEAN HD
HOW TO CLEAN COAL AND PET COKE SHIP CARGO HOLD?
Recommended CLEANING CHEMICAL FOR CLEANING -
For cleaning coal and pet coke residues from ship cargo holds, you need a specialized marine chemical that can handle stubborn carbon-based deposits, greasy films, and black dust. Here's a complete overview:
Recommended Chemical: RXSOL CARGO HOLD CLEANER (Alkaline Type)
Product Name: RXSOL HOLD CLEAN – ALKALINE or RXSOL ORG CLEANER
Type: Heavy-duty water-based alkaline cleaner with degreasing properties
Application: Designed specifically for removing residues of coal, petroleum coke, clinker, and oily carbon particles from steel surfaces.
Key Features:
Effectively removes carbon, soot, coal dust, and petroleum coke residues
Non-flammable and biodegradable
Safe on painted surfaces and steel
High emulsifying power lifts oily deposits easily
Can be used in hot or cold water
Application Instructions:
Dilution Ratio:
For heavy contamination: 1:2 to 1:5 (chemical:water)
For light contamination: 1:10 to 1:20
Cleaning Steps:
Remove loose Coal or Petcoke dust with compressed air or dry sweeping.
Prepare cleaning solution in a chemical spray machine or tank.
Apply chemical using a foam gun, sprayer, or brush on the contaminated surfaces.
Let it soak for 15–30 minutes (don’t allow to dry on surface).
Rinse thoroughly with high-pressure freshwater.
Repeat process if necessary for thick or stubborn deposits.
Safety & Handling:
Use PPE: gloves, goggles, face shield
Do not mix with acidic products
Ensure good ventilation during application
Product Availability:
Available in 25 Ltrs, 50 Ltrs, and 210 Ltrs drum packaging
Immediate stock in India, UAE, Oman via RXSOL group network
There are many advantages of using Demuslfier manufactured by RX Marine International. We have been in this market for more than 25 years and have developed a modern, cost effective, efficient and remarkable result showing porduct.
Some of the advantages of using RXSOL Demulsifier are:
- Contains surface-active materials
- Separates water from oil
- Free from defilements
- Excellent stability
- Precise chemical composition
- Easy to Handle
RXSOL Export quality Demulsifiers is very effective emulsion breakers to separate water in crude oil emulsion. Its excellent performance formulations enable the quick separation of produced water from oil. Acts as a dehydration chemicals.
Chemically RXSOL Demulsifiers reduce the interfacial tension between hydrocarbon and water, which helps to separate water content quickly.
Always Use fresh water for making the cleaning solution, uses of sea water entire heating coils have chances of hard solid salt deposits and salt deposits could become difficult to remove. But if uses of sea water for making the chemical solution is only option then during cleaning operation First, stop the steam in the heating coils at least 30 minutes before stopping recirculation. Finally rinse the tank with fresh water for 5-10 minutes immediately after chemical recirculation.
TSP Used in detergent mixtures, soaps, removing boiler scales, textiles processing, clarifing sugar, paper, water softner, leather tanning, laundering, paint remover,emulsifing fats oils, dairy food processing equipments, metal industrial cleaners.
The most common use of Tri-sodium Phosphate is in cleaning agents.
Tri-sodium Phosphate is used in photographic developers, in clarifying sugar and also in removing boiler scale.
TSP is also used in manufacturing paper, in softening water and in tanning leather
TSP Trisodium Phosphate Anhydrous supplier Oman Muscat, UAE MiddleEast Gulf, Nairobi Kenya
Email ::: mail@rxmarine.com
Why Traffic Film Remover TFR Cleaner ?
Traffic Film Remover TFR Cleaner is easy and effective to use. And safe TFR or the best way to wash your vehicle. Traffic film remover (TFR) products that will result and give your car a brand-new look without damaging its paintwork.
Email us to Get discounted Price for Traffic Film Remover...
Rock and Roll Method at sea Tank cleaning for double bottom tank:
Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.
1) First of all heat the remaining oil in tanks .
2) By stripping constantly. flush the tank with sea water,
3) Close all suction and discharge valves .
4)1st Dose Fill the tanks by ½ to 1 litre sea voyage Tank clean plus per tone of water through pipe or manhole , for 75-80% of capacity of tank to be cleaned.
5) Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.
6) Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7) Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8) Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9) For completion add second dose of Sea Voyage Tankclean, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10) Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11) To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.
One of largest Tank Cleaning Sea Marine Cleaning Chemical Supplier in Mumbai, Kandla, Sikka, Jamnagar, Kolkata, Ennore, Fujairah, Dubai, Abudhabi, Ajman, Sharjah, Muscat, Oman, Canada BC
Email : mail@rxmarine.com