From: Reny
Date: Wed, Jan 31, 2018 at 10:51 AM
To: rxmarine.com, dubichem.com
Need a reply
1.Is Biosol cleaner RXSOL-20-2019-025) compatible with Titanium plate and Nitrile gasket?
2.Is Descalex Polymer (RXSOL-40-1048-025) compatible with Titanium plate and Nitrile gasket?
3 If the plate heat exchanger volume is 2797 litres on the sea water side.That's the side where there has been contamination with heavy oil , how many litres of bio sol cleaner and Descaler Polymer do we need to order?
Need your feedback to the above queries
Thanks Regards
Reny
Dubai
General Manager
Gulf Sondex FZCO
Danfoss Heating Segment
Jebel Ali, Dubai – U.A.E
Reply:
Dear Sir,
1.Biosol cleaner RXSOL-20-2019-025 contians oil soluble formula it doesn't effect Titanium plate and Nitrile gasket.
2.Descalex Polymer (RXSOL-40-1048-025) is derivative form or ACIDIC polymer, it doesn't react with Titanium metal and Nitrile gasket
3.Recirculation is best option to clean heat exchanger, And if volume is 2797 litres on the sea water side means same or aditional 30% volume tank required to circulate the liquid. And required percentage of Biosol is 5 - 10 % of total liquid volume which means 100 to 150 Ltr BIOSOL is more then suffiecient to circulate in this case to clean as contaminatied with heavy oil. And after circulation of BIOSOL, remove all contaminated water from heat exchanger and tank. Then take other sea water / fresh water to dose Descaler Polymer, Its dose ratio is completely depends on deposition of scale inside the plate of heat exchanger. The solid mass of mineral deposits approximate mass calculation will help to use proper volume of RXSOL-40-1048-025 Descaler. As per gallon in concentrated form of RXSOL-40-1048-025 has the ability to dissolve approximately 1.5kg of scale mass So 3 to 20 percent of total volume depending on deposition of scaling materials required. 150 Ltr to 600 Ltr descalex polymer can be use to clean scale deposits. After use of RXSOL-40-1048-025 a 0.5% solution of Alkalinity Control infresh water should be used for neutralization.
Regards
Technical Support Team
How to control Algae growth in cooling towers, air conditioning cooling systems, and evaporative condensers?
RXSOL-40-4009-210 MICRO BIOCIDE Cooling Water RXSOL is an organic chlorine releasing microbiocide which will effectively control the growth of algal slimes on cooling Water distribution decks, fill, and basins.
This product is recommended for use in industrial process cooling towers, air conditioning cooling systems, and evaporative condensers. It is particularly recommended for use in systems where algae growth is especially difficult to control.
MICRO BIOCIDE Cooling Water RXSOL manufacturer and supplier in United Arab Emirates Dubai, Abudhabi, Sharjah, Ajman, Fujairah, Muscat BArka, Sohar, Oman.
MiCRObiocide manufacturer and supplier in Surat, Gandhidham, Mumbai, Pune, Nashik, Kolkata, Chennai, Visakhapatnam, Paradip Odisha, Varanashi UP.
#CoolingWaterTreatment_Biocide
#Biocide_ManufacturerSupplier
RXSOL Biocide is completely enviroment friendly and is very effective in killing bateria of water. The excellent formulation of this product does not allow any toxic by products to be formed.
Biocide can be used in the following fields:
- Marine / Industrial circulating cooling water for both open and closed loops ( including food contact )
- Milk & Dairy products processing and packaging plants.
- Wineries, vineyards and breweris plant
- Meat, Seafood, poultary and vegetable processing plants
- Cleaning, sanitising and disinfections of UF & RO membranes
- Waste water treatment ( odour control agent, disinfectant and cleaner )
- Hospital & Health care facilities, veterinary clinics
- Hatcheries and egg processing unit
- Dish and table ware sanitizer
RXSOL Biocide is completely enviroment friendly and is very effective in killing bateria of water. The excellent formulation of this product does not allow any toxic by products to be formed.
Why RXSOL CORROSION INHIBITOR for cooling Water System Required ?
Corrosion damage metal surface by chemical or electrochemical reaction which results failure of equipment with the resultant cost of replacement and plant downtime.
Due to Deposition of CORROSION result fouling in of heat exchanger fouling caused by the accumulation of corrosion products., Heat Transfer efficiency decreases. Which resulting loss of plant efficiency due to loss of heat transfer.
HOW to CONTROL CORROSION in COOLING SYSTEM?
Primary Step : Use calcium carbonate bleanded RXSOL-40-4090-025 to increase alkalinity in the water which results to form a protective film on METAL SURFACE.
Second Step : Remove the corrosive oxygen from the water, either by mechanical or chemical deaeration Oxygen Scavenger RXSOL-50-5023-025. Excess of OXYGENT is mother of CORROSION.
Third Step : Add corrosion inhibitors RXSOL-40-4011-025
Which material is used to protect COPPER METAL in Water System?
Copper Corrosion Inhibitors. The most effective corrosion inhibitors for copper and its alloys are the aromatic triazoles, such as benzotriazole (BZT) and tolyltriazole (TTA).
How to change fouled cooling water into clear phase ?
Bio-Dispersant effectively cleans and disperse heavily fouled Cooling Water Systems. Fouling by microbiological slimes is reducing overall system efficiency. RXSOL bio dispersant is the powerful and concentrated product to remove and disperse the unwanted deposits, Which is resulting in water clarity. Our dual mechanism of RXSOL-40-4093-210 also effectively controlling oil based fouling and is the ideal solution for use in both re-circulating and once-through cooling water systems.
RXSOL-40-4093-210 is a high-performance cooling water bio-dispersant that incorporates powerful surface active agents. It is scientifically formulated for the treatment of cooling systems including recirculating and once-through cooling water systems.
RXSOL-40-4093-210 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.
RXSOL-40-4093-210 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, teflon, polyethylene, acrylic resin or polypropylene.
Dosage levels for RXSOL-40-4093-210 will be in the range of 1100ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled.
How to change fouled cooling water into clear phase ?
Bio-Dispersant effectively cleans and disperse heavily fouled Cooling Water Systems. Fouling by microbiological slimes is reducing overall system efficiency. RXSOL bio dispersant is the powerful and concentrated product to remove and disperse the unwanted deposits, Which is resulting in water clarity. Our dual mechanism of RXSOL-40-4093-210 also effectively controlling oil based fouling and is the ideal solution for use in both re-circulating and once-through cooling water systems.
RXSOL-40-4093-210 is a high-performance cooling water bio-dispersant that incorporates powerful surface active agents. It is scientifically formulated for the treatment of cooling systems including recirculating and once-through cooling water systems.
RXSOL-40-4093-210 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.
RXSOL-40-4093-210 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, teflon, polyethylene, acrylic resin or polypropylene.
Dosage levels for RXSOL-40-4093-210 will be in the range of 1100ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled.
Biocide can be used in the following fields:
- Marine / Industrial circulating cooling water for both open and closed loops ( including food contact )
- Milk & Dairy products processing and packaging plants.
- Wineries, vineyards and breweris plant
- Meat, Seafood, poultary and vegetable processing plants
- Cleaning, sanitising and disinfections of UF & RO membranes
- Waste water treatment ( odour control agent, disinfectant and cleaner )
- Hospital & Health care facilities, veterinary clinics
- Hatcheries and egg processing unit
- Dish and table ware sanitizer
BILGE COAT is advanced formulation ALKALINE COMPOUNDS to neutralize ACID formed by cargo like SULPHUR and water. RXSOL BILGE COAT neutralizer formula protects bilge lines and bilge wells from corrosion, during voyages when the cargo holds are loaded with Sulphur.
RXSOL ADVANCE BILGE COAT CHEMICALLY neutralize ACID, As RXSOL BILGE COAT specialized with ALKALI FORMULATION with inhibitors and antifoaming agents.
RXSOL BILGE COAT manufacturer and supplier in MUMBAI, Kandla, Chennai, Vizag, Kolkata, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat Sohar Oman, Nairobai, Kenya, Canada.
Email : rxmarinegroup@gmail.com
#BilgeCoat_SupplierIndiaOmanUAE
#BilgCoat_ManufacturerIndiaOmanUAE