Carbohydrazide also Widely used in medicine, herbicides, plant growth regulators, dyes and other industries.

Carbohydrazide is widely used in the production of drugs, herbicides, plant growth regulators, and dyestuffs. Carbohydrazide is a white crystalline solid with a melting point of 153-154 °C. It decomposes upon melting. It is very water soluble and largely insoluble in organic solvents.

Carbohydrazide Uses and Application:

Oxygen scrubber: carbohydrazide is used as an oxygen scrubber in boiler systems. Oxygen scrubbers remove oxygen gas from the boiler system to prevent corrosion.

Polymers: carbohydrazide can react with many aromatic compounds to create polymers.Carbohydrazide can be used as a curing agent for epoxide-type resins.

Photography: carbohyrazide is used in the silver halide diffusion process as one of the toners. Carbohydrazide is used to stabilize color developers that produce images of the azo-methine and azine classes.

Carbohydrazide has been used to develop propellants stabilize soaps, and used a reagent in organic synthesis.

Why Traffic Film Remover TFR Cleaner ?

Traffic Film Remover TFR Cleaner is easy and effective to use. And safe TFR or the best way to wash your vehicle. Traffic film remover (TFR) products that will result and give your car a brand-new look without damaging its paintwork.

Email us to Get discounted Price for Traffic Film Remover... 

 How to Disinfect Water Using Calcium Hypochlorite 

A.)  Dissolve 1  teaspoon 60-78% granular calcium hypochlorite in 7 - 8 liters of water .
B.) Then add this solution 1 part to  disinfect water to 100 parts water to be treated. Finally keep mixed water to settle completely for 20 - 30 minutes before drinking.

NOTE ::: Freshly prepared ( A.) solution is recommended to make 2nd step ( B.) drinking water.

Calcium Hypochlorite Granules and Calcium Hypochlorite Chlorine Tablet Manufacturer and supplier in India, Middle East, Oman, Kenya Africa

Chlorine Granules and Chlorine Tablet supplier in Dubai, Muscat, Nairobi, Canada. 

Also feel free to ask for your chlorine Tablet and Chlorine Granules price, speciafication and supply for Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Barka, Sohar Suhar, Kenya.

Email : mail@rxmarine.com ( For India )
          : mail@dubichem.com ( For Middle East )

          : mail@muscatchemical.com ( For Oman )

          : mail@kenyachemical.com ( For Africa )
          : chemicals@canadachemical.com  ( for Canada )

MAGNESIUM SULPHATE (HEPTA HYDRATE 99.5% MIN are frequently used as RO CHEMICALS. To make water wholesome, testier and healthy many Mineral water manufacturers are adding these minerals frequently :

1st Option :Compbination of magnesium sulfate, potassium chloride

2nd Option :calcium chloride, magnesium chloride, and potassium bicarbonate.

sodium bicarbonate
3rd option : Magnesium sulphate and Potassium bicarbonate

Dose Level : 100ml of water, Mg=0.2mg; K=0.1mg

                       Per 100ml, Na=0.3mg; Mg=0.1mg

Follow these steps to prevent or to kill the moss from your lawn, garden, orchard or any other place.

• Mix 1/4 to 1/2 Pounds of RX Marine International Ferrous Sulfate with 4 gallons of water for every 1,000 square feet of lawn.
• Spray the solution you made on your entire lawn and concentrate on area with existing moss. (Note: you need to spray your entire lawn even the areas without moss to prevent future growth).
• Do NOT water the lawn after apply the Ferrous Sulfate treatment and allow several days to kill the moss.
• Get rid of the dead moss patches on your lawn. (Note: you could simply pick them out by hand.)
• Spread 5-10 Pounds of RXSOL Calcium Carbonate (Limestone) per 1,000 square feet of lawn to neutralize the acidifying effects of Ferrous Sulfate.

For further information like MSDS, Price, kindly mail us at: mail@rxmarine.com

Or give us a call at: +91 9322594669

 USES:

Deep cleaning of outdoor condenser coils to restore efficiency and increase performance of the system.

DILUTION RATIOS:

Because RXSOL-16-1697-005 is highly concentrated, it must be diluted prior to use. Dilution also improves penetration into the coil and increases product performance. Actual dilution ratios will vary according to the application. The following is intended as a general
guideline:

• Up to 8-10 parts water to 1 par tRXSOL COIL CLEANER for light cleaning and brightening, when expanding foam is not required.
• 3-5 parts water to 1 part RXSOL COIL CLEANER for foaming action on difficult cleaning tasks.
• 1-2 parts water to 1 part RXSOL COIL CLEANER for use as a high foaming,aluminum finned, air cooled condenser coil cleaner.Use the minimum concentration required to accomplish your task.

Note: Do not use RXSOL-16-1697-005 at concentrations greater than 1:1 (less than 1 part water to 1 part RXSOL-16-1697-005 ). Rinse the treated surfaces as well as the surrounding area thoroughly after use.

APPLICATION METHODS:

Low pressure, acid resistant tank sprayers are recommended.
Regardless of application method, avoid inhalation of mist or contact of liquid or mist with skin.

SUGGESTED INSTRUCTIONS FOR USE:

•  When handling RXSOL-16-1697-005 or any other strong chemical, be sure to wear chemical imperviousgloves,apron and splash goggles.
   
• Determine required dilution ratio for the specific application. It is recommended to start with a dilution ratio of 10:1 and increase concentration until the desired results are achieved.
   
• As with mixing all acids, place the desired amount of water into the tank and then add RXSOL-16-1697-005.
   
• Turn off fans and allow hot coils to cool before applying.
   
• Using plain water, wet both the condenser coil as well as the area surrounding the equipment. Wetting the coil with water aids in product penetration and performance.
   
• Apply the properly diluted product to the coil surface. Whenever possible, apply solution from the outlet side of the coil. Allow product to remain on surface, normally 5-10 minutes. Do not allow product to dry on the coil. Note: In extreme cases, application may have to be repeated to achieve desired results.
• If foaming does not occur, check for extreme grease buildup which will slow cleaning process. Foaming may not occur if coil is coated or painted.
   
•   Rinse coils, tools and surrounding area thoroughly after completing the coil cleaning process

Condensor Coil Cleaner manufacturer and supplier in India UAE Oman Kenya Uganda Canada ::: rxmarinegroup@gmail.com

CHLORIDE TEST for DRILLING FLUID
Drilling and Completion Fluids

Chlorides

First of all test pH value of Mud, If it shows alkaline then neutralized by using phenolphthalein indicator with Sulfuric Acid. Then titrated with standard silver nitrate solution, using potassium chromate as indicator. The results are reported as parts per million chloride ion, although actually measured in terms of mg Cl ion per 1000 cm3 of filtrate. To determine the chloride content of an oil mud, the sample is diluted with isopropyl alcohol and then mixed with distilled water, neutralized to the phenolphthalein end point, and then titrated in the usual way.

The end point is difficult to detect using the silver nitrate method, and the results depend to some extent on the operator. Titrating with mercuric nitrate, using bromophenol blue as an indicator, is an alternative. The method gives a much sharper end point, which is particularly advantageous when titrating whole mud, especially oil muds.

We are well known name for Mercuric Nitrate supplier, Bromophenol blue supplier, Phenolphthalein supplier, Iso Propyl Alcohol supplier, Silver Nitrate supplier, Potassium Chromate, Distilled water supplier in Mumbai, Gandhidham, Chennai, Visakhapatnam, Kolkata, Fujairah, Sharjah, Ajman, Abudhabi, Dubai, Muscat - Oman.

Antifouling Hull Cleaning agent. specially formulated to Clean boat hull by quickly removing algae, lime, scale and chalking remove those hard to shift stains from fibreglass boats, Hull shaft area. Hull Cleaner uses a unique acid-surfactant blend designed to remove marine growth, hard water stains, rust, and calcium buildup.

Other Valuable Product for Engine room, cleaning and maintenance. Deck and hull. Tank and cargo hold cleaning:

AQUATUFF

METAL BRITE

BOLL CLEAN 2000 CLEANING AGENT

DISCLEANER 

ENVIROCLEAN

RUST CONVERTER

AIR COOLER CLEANER

COLD WASH HD

CARBON REMOVER

DESCALING LIQUID

ULTRASONIC CLEANER 

SODIUM HYPOCHLORITE (10-15 PCT)

Investigations have shown sodium hypochlorite to be an effective disinfectant having broad applications. Although a number of other disinfectants have been investigated, sodium hypochlorite appears to offer the best mix of low cost, ease of use, safety, and effectiveness in areas where there is enough water and water is not excessively turbid.

Mainly Condensate storage tank is specialized tank to get and store oil after condensation of fossil fuels during production. While the exact properties of any particular condensate tank may vary product wise, but generally used to store a mixture of hydrocarbon gases. After periodic interval of time its cleaning can help to reduce down time. We have one of our successful and powerful product called ORG-3, which is effectively dissolves and emulsify fossil fuels and mixture of hydrocarbon trapped in condensate tank. 

We are keeping ready stock of ORG-3 at Fujairah, Mumbai, Chennai, Kolkata, Kandla. Our standard packing of Condensate storage tank cleaner - ORG-3 is 25 Ltr and 210 Ltr.  For Middle East requirement pl. drop email at  chemicals@dubichem.com  while for India's supply use mail@rxmarine.com