Apply full strength to remove thick deposits of oil and grease, varnish, floor wax, and to wash rig floor and equipment. Tips to save Rig Wash - Manual Cleaning stripping of excess oil - soil deposited mass always be wise decision to save extra qty required of RIG WASH degreaser. After removal of excess deposition simply apply RIG WASH degreaser by brushing or spraying on surface to be cleaned, And wait for 5 to 10 minutes to get complete emulsification effect then finally rinse / hose off entire surface.
General Cleaning : Use in 1:10 dilution with water for general purpose cleaning.
Soak Method : For smaller items dilute ths solution Use in 1:5 dilution with water and soak for 30 minutes to 3 Hrs, then use pressure sprayers to clean parts item perfectly. Otherwise use in 1:5 dilutionwith kerosene for solvent wash tanks and to clean mechanical parts.
Principal of RIG WASH : RXSOL Rig Wash Cleans effectively rig floors and equipment and degreases shop floors by disperses in petroleum-based fluids and solubilizes in water
RXSOL RIG WASH cleaner can be used to remove grease and oil-based compounds.
RIG WASH cleaner is a cost effective surfactant solution used for surface cleaning applications
Avialable Stock : 25, 50, 210 Ltrs packing at Visakhapatnam - Kakinada, Chennai - Ennore, Kolkatata - Haldia - Paradip, Surat - Kandla - Mundra - Sikka, Mumbai - JNPT. Fujairah - Dubai- Sharjah - Abu Dhabi
Email : mail@rxmarine.com
Where is Rigwash used?
Rigwash significantly cleans greasy surfaces of rigs drilling platforms, Oil refineries, Ship cargo vessels and other oily soily greasy equipment in the oil and gas industry. Simply spray Rig Wash liquid with low pressure to the desired surfaces and leave for 0.5 to 3 minutes. Finally, use high-pressure water to rinse the detergent.
RXSOL Rigwash ingredient is 100% Biodegradable and environment-friendly. And RIG WASH also classified as cost effective surfactant cleaner.
Rig wash detergent is available in 1000, 210, 50 and 25 liter packing. And we are one of largest supplier of Rig wash at Kakinada - Visakhapatnam, Chennai - Ennore, Manglore, Mumbai - JNPT, Kandla - Gandhidham, Surat, Kolkata - Haldia, Fujairah - Abu Dhabi, Sharjah - Dubai
Email : mail@rxmarine.com
RIG WASH LIQUID is popular in Oil Rigs field as a classified alkaline degreaser, Which is free from caustic Alkali. Its concentrated RIG WASH LIQUID formula enable industrial strength degreasing and cleaning product. Rig wash also contains chelating agent which makes to work with all types of water ( Hard or Soft water ). We are one of largest ri wash supplier for Drilling, Oil & Gas industries in India. And our multi location ware house helps our customer to get materials with zero transit time during Shutdown and Turnaround. RX MARINE INTERNATIONAL keeping ready stock of RIG WASH in various size and packing which includes 1000L, 210L, 25Ltrs.
We are RIG WASH supplier in Kakinada, Visakhapatnam, Chennai, Ennore, Kolkata - Haldia, Mumbai, Kandla, Goa, Manglore, Fujairah, Dubai, Sharjah, Abudhabi.
Email : mail@rxmarine.com
RXSOL Teepol is Anionic in nature, which is resulting very good emulsification with most of oily and greasy contents. TEEPOL RXSOL multiple cleaning formula increasing its application field widely. TEEPOL RXSOL not only used in Household, industrial cleaning application but also commonly used in Laboratory, Pharamceutical, MARINE cleaning operation.
We are supplying teepol rxsol widely in INDIA - Middle East and Oman. And we are supplier of RXSOL TEEPOL in Navi Mumbai MIDC, Mumbai, Gandhidham, Mundra, Sikka Jamnagar, Surat, Visakhapatnam, Kolkata, Haldia, Paradip, Fujairah, Dubai, Abudhabi, Ajman, Sharjah Muscat Sohar Oman... http://rxmarine.com/Teepol-RXSOL-Supplier
MSDS of RXSOL TEEPOL and Price : mail@rxmarine.com
Also refer this link : http://rxmarine.com/Marinechemical-supplier
There are many advantages of using Demuslfier manufactured by RX Marine International. We have been in this market for more than 25 years and have developed a modern, cost effective, efficient and remarkable result showing porduct.
Some of the advantages of using RXSOL Demulsifier are:
- Contains surface-active materials
- Separates water from oil
- Free from defilements
- Excellent stability
- Precise chemical composition
- Easy to Handle
Difference between Cement Retarder and Cement Accelerator
Retarding admixtures : Generally used in HOT Weather.
Chemicals : Sodium Gluconate, Gypsum,sugar,strach etc
Retarding admixtures helps and work as water reducing agent and Cemenrt retarder keep concrete workable during placement and delay the initial set of concrete. Chemically retarder slow the setting rate of concrete, are used to counteract the accelerating effect of hot weather on concrete setting. High temperatures often cause an increased rate of hardening which makes placing and finishing difficult. Retarders keep concrete workable during placement and delay the initial set of concrete. Most retarders also function as water reducers and may entrain some air in concrete. Retarder use for increase setting time of cement.
Accelerating admixtures : Generally used in COLD Weather.
Chemicals : Refined silicates, Aluminium sulfate and synthetic plasticizer, calcium chloride etc.
Accelerators make concrete set faster rapidly after mixing with concrete. This product can be added to a concrete batch either immediately before or during mixing to kick the set time of a batch of concrete into high gear and initiate setting time one to three times faster than normal mortar and concrete. On the other hand Accelerating admixtures increase the rate of early strength development, reduce the time required for proper curing and protection, and speed up the start of finishing operations. Chloride Free and Accelerating Compund for Concrete and Mortar. Accelerator is use for reduce setting time.
Accelerating admixtures are especially useful for modifying the properties of concrete in cold weather.
Uses of Potassium permagnate for water treatment ?
Potassium permanganate is disinfectant ( control biological growth ) and control odor and taste, remove manganese, iron and color from the water. And potassium permagnate effectively removing sulfide odors from water.
NOTE : Give sufficient time to to complete reaction of potassium permagnate with polluted water, You may need a detention tank to give adequate time for iron and manganese to oxidize. If you are treating taste and odor, use doses of potassium permanganate ranging from 0.25 to 20mg per liter.
After treatment with potassium permagnate Filter drinking water to remove the manganese dioxide as well as the elemental sulfur precipitate that resulted from the treatment with the potassium permanganate. Potassium permanganate treatment is commonly filter with resin bed system. It’s best to have your filter professionally installed.
How Carbon Filters Work ?
Importance of CARBON increases due to its large surface area. Mathematical area calculation of one pound carbon can cover more then 120 acres of ground surface. And simple concept is MORE surface area can absorb large quanities of impurities present in water and other liquid materials.
In water carbon filtration case impurities present in water which can cause disease like cancer and other health problem. Carbon filters due to its large surface area absorbs easily large amount of chemicals and substances that pose serious dangers to the normal domestic water supply. work so well because of their large surface area.
Carbon granuals water filtering is a method to remove contaminants and impurities, removing chlorine, sediment, volatile organic compounds (VOCs), taste and odor from water.
Largest Exporter of carbon from Mumbai, Gujrat - INDIA.
Activated Carbon used in the field of Edible Oil, Dyes, Fertilizer,Pharmaceutical, Oil Refineries etc. We are exporter of activated carbon globally to countries like UK ,USA, Canada, UAE, Brazil, Chile, Dubai, Argentina Australia Austria Bahrain Bangladesh Belgium Brazil Czech Republic Denmark Finland France Germany Iran Iraq Ireland Japan South Korea Kuwait Mexico Netherlands New Zealand Norway Panama Portugal Qatar Russia Saudi Singapore South Africa Spain Sweden Switzerland Turkey Yemen Zimbabwe etc.
In India and UAE we have Sales Representatives in the following cities -
Ennore - Chennai , Surat , Vishakapatnam (Vizag), Navi Mumbai , Kolkata , Kandla Gandhidham - INDIA
Fujairha - UAE
MOHR'S METHOD
Principle
Chlorides are estimated as sodium chloride by titration against silver nitrate using potassium chromate as indicator. Silver nitrate is added until all the chloride ions present in the SAMPLE WATER have combined with the silver ions. Any further silver nitrate added is now free to combine with the potassium chromate indicator to yield a red precipitate of silver chromate. The solution at this point suddenly changes from pale yellow to faint brick-red colour.
NaCl + AgNO3→AgCl + NaNO3
Reagents
1.
Standard silver nitrate solution (2.906 g of silver nitrate is dissolved in and made up to 1 litre with distilled water). Keep in an amber bottle and standardize against an accurately prepared sodium chloride solution containing 500 mg NaCl per 100 ml using the method described below. Check at frequent intervals, and determine the factor.
1 ml standard AgNO3 equal to 1 mg NaCl
2. 5 per cent potassium chromate solution.
Procedure :
1. Pipette 1.0 ml SAMPLE WATER into a conical flask containing about 10 ml of distilled water and 2–3 drops of potassium chromate.
2. Slowly add the silver nitrate from a 10 ml burette and continuously rotate the flask, to ensure thorough mixing.
3. As the end-point nears, the silver nitrate solution should be added slowly and carefully to avoid adding excess of the reagent.
4. Note the titre and repeat the titration again if sufficient SAMPLE WATER is available.
5. Normal fluid usually requires between 7.0 and 7.6 ml of silver nitrate.
Reaction :
NaCl + AgNO3 = AgCl + NaNO3
From the above equation it can be seen that 58.5 g of sodium chloride are equivalent to 170 g of silver nitrate.
Therefore 58.5 mg NaCl ≡ 170 mg AgNO3
Now the standard solution of AgNO3 contains 2.906 g per litre or 2.906 mg per ml
Hence 2.906 mg or 1 ml of standard AgNO3 corresponds to
2.906 X ( 58.5 / 170 mg of NaCl )
1 ml AgNO3 = 1 mg NaCl
If the titre was 7.3 ml of AgNO3 (or 7.3 ml × factor), then mg NaCl per 100 ml CSF = titre X 1 X ( 100 / Amount Taken )
7.3 X 1 X 100 = 730 mg per 100 ml
Notes—
(a) It is now desirable to express the NaCl value in terms of mmol per litre, in which case the following formula is used.
mmol per litre = ( mg per 100 ml X 10 ) / molecular weight
= ( 730 X 10 ) / 58.5 = 124.8
(b) A solution of AgNO3 containing 5.812 g/litre can be used in which case 1 ml of AgNO3 = 2 mg NaCl.
Phenol liquid is an amino acid derivate which is used to protect plants from infections and pests and is made by the natural degradation of organic waste products. It is popularly known as Carbolic Acid Liquid and acts as an antimicrobial agent and is used in a variety of pesticides, insecticides, and herbicides.
Molecular Formulae- C6H5OH
Alternative Names- Hydroxybenzene, Phenic Acid
BENEFITS AND USES-
Phenol liquid is used in pesticides to ward off pests and pathogens from infecting the plants and to promote plant growth.
It deters pests and small insects from eating the plants and destroying the yields.
It helps in improving the productivity of crops by protecting them from microbes.
It is simple to administer during the planting season.
It does not get absorbed by the plants and is therefore safe for use on plants and crops.
It has a longer shelf life and is highly stable.
HOW IT WORKS-
It works by protecting the plants and crops from insects, microbes, pests, and weeds.
It works by forming a layer on top of the soil and releasing substances that kill pests.
TIME OF APPLICATION-
It can be used during the dry summer or winter months.
It should be used at least once every three months to avoid a resurgence of pests and insects in the fields.
RECOMMENDED USAGE-
For spraying, the recommended usage is 2% weight by volume.
Use 5–10 kg/acre for solid application.
HOW TO USE-
Spray it directly onto the soil early in the morning or late in the evening.
Our phenol liquid should be added to a sprayer or mixing tank that is already filled with fresh water.