Drilling Fluids & Mud Oil Field chemicals-81

Solvent Naphtha 150 exporter and supplier in Fujairah, Dubai, Sharjah, Abudhabi, UAE Middle East, Barka Sohar Muscat Oman, Mumbai Kandla, Kolkata, Chennai, Vizag, Gandhidham, Kenya Nairobi Africa, Canada, Sudan

Description: Solvent Naptha 150

Product name:Polyacrylamide

Mf:(C3H5NO)n 

CAS NO.:9003-05-8

EINECS No.:201-173-7

Other name:Polyacrylamide absorbent Gel; Polyacrylamide solution; Acrylamide resin ,pam/cpam/apam/polyacrylamide/cationic polyacryamide/anionic polyacrylamide.; 

Acrylamide resin (high M.Wt.); Acrylamide gel solution; Polyacrylamide,hydrolyzed; Polyacrylamide; PAM

Appearance:white powder or granule

Polyacrylamide is, simply called PAM, a water- soluble high polymer and widely used in petroleum, paper-making, metallurgical, textile, chemical and environment protection fields. There are three categories of anionic, cationic and non-ionic type. 

Polyacrylamide according to different uses and users of the product performance requirements can choose to use different molecular weight.

Mineral Processing Chemicals,For mineral processing,we normally choose anionic polyacrylamide and nonionic polyacrylamide according to the different geological conditions. 

4.  Acrylamide, Acrylamide is made By Microbiological Method. With the characteristics of higher purity and no copper and lower iron content, it is especially suitable for polymer production and uniform molecular weight spread. It is mainly used to produce different kinds of homopolymers and modified polymers and also is widely applied to medicine, dyestuff, painting and daily chemicals industries. Molecular formula:CH2CHCONH2 Properties:White crystals,colorless,toxic proportion:1.122(20/4) Melting:84-85°C Boiling point:99-104°C

5.  Super Absorbent Polymer, is a high performance super absorbent polymer based water retainer scientifically formulated using an innovative cross-linked co-polymer of acrylamide and potassium acetate. Acceptas super absorbent polymer has a range of applications but is primarily used as a highly effective water retainer for soils and substrates in farming, agriculture and horticulture

Anionic Polyacrylamide (PAM)/Polyelectrolyte, for water treatment, for suldge treatment.  which is widely used as flocculant.Our products are widely used in paper making industries, rubber industries, leather industries for waste water treatment chemicals.oil extraction(EOR), environment protection,construction materials and agriculture,As well, they can be used in mineral dressing industries. 

PHPA(Partially Hydrolyzed Polyacrylamide) for drilling mud additive in the oilfield.

Acrylamide Acrylic Amide manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Acrylamide Acrylic Amide at a competitive price from us. We have ready stock of Acrylamide Acrylic Amide in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Boiler Water Treatment products

CHARACTERISTIC :

• Convenient liquid treatment, which provides the basic alkalinity on which successful water treatment depends.
• Provides optimum conditions for hardness control to function.
• Neutralizes acid conditions.
• Will assist in keeping silica in suspension.
• Simple test to determine level of treatment.
• Can be used in boilers of all pressures.
• Can be used as a neutralizer after acid cleaning operations
• Suitable for use with all auxiliary boilers; waste heat units; economizers, package boilers, smoke and water tube boilers.
• Dispersant action suspends sludge and sediment particles for efficient blow down.
• Oxygen scavenging for optimum protection.
• Protects boiler, steam lines, condensate lines and feed water lines from corrosion.
• Fast action due to catalyst.
• Simple test to determine level of treatment.

Basic Boiler System Schematic

Below is a summary of problems associated with the common impurities in water and solutions to each problem.

List Of Problems Caused By Impurities In Water

Chemical feed should be continuous. Chemical pumping rates can create problems especially for neat feed set ups. Using on/off feed systems such as a recycle timer can create problems. Chemical feed pumps should be sized or product strengths should be adjusted to allow continuous feed.

Steam and carbon dioxide leave continuously, so setting up a neutralizing amine pump to feed intermittently can lead to wide variations in condensate pH control. If sampling is done from a condensate receiver, the tank volume may buffer the variations and the changes may not be noticed, but corrosion could be occurring to areas of the piping that see the rapidly changing pH.


If polymeric dispersants, phosphonates, phosphate, or chelants are fed intermittently into the feedwater using a recycle timer, and the amines are not fed continuously, a cycle of iron slugs returning in the condensate can be followed by slugs of high dispersancy cleaning of the iron from the deaerator and dragging it into the boiler.

Load changes can affect chemical concentrations when the chemical feed is base fed. Example: Steam production of one million lbs./day; 4% blowdown; 20% active boiler polymer product fed at 5 pounds per day. The calculated daily average polymer concentration would be 24 ppm. Assume peak plant production load is 60,000 lbs./hr., but during the overnight hours the load is only 5,000 lbs./hr. If the dispersant is being fed continuously over the 24 hours, during the 8- hour low load period, the boiler polymer concentration would have increased to over 200 ppm. Upon high fire when production resumes, carryover is very possible because of over concentrating the polymeric dispersant.

Chemical feed needs to be paced to steam production, especially where significant load changes occur.

Carbon dioxide can concentrate in steam and condensate making neutralizing amine treatment impractical. Carbon dioxide levels can be relatively low in steam exiting a boiler at only a few ppm, but if there are areas where it becomes “trapped” and can accumulate, concentrations can reach extremely high levels into the hundreds or even thousands of ppm.

CO2 is a non-condensable gas. It has a distribution ratio in the steam piping and condenses at points throughout the system. At the boiling point, the solubility of the gas in water is extremely low. The solubility of the CO2 is actually lower in the condensate than it is in the steam. For the CO2 to escape from the steam into the water it will accumulate in the steam space just above the water level until the partial pressure becomes high enough for the CO2 in the incoming steam to be able to exit into the condensate. This creates a steady state condition of CO2 coming in and exiting, but an area of severe localized corrosion occurs where the carbon dioxide concentration is high.

The highest CO2 concentration normally occurs just above the condensate water level. If there is an area where condensation is occurring and running down pipes or the sides of vessels, the CO2 concentration will be very high and the pH will be about 5.3 – 5.5 in that location creating high corrosion rates.


The solubility of CO2 increases dramatically as the condensate temperature falls below 212 °F. When there is an accumulation of CO2 in an area and the condensate temperature is relatively low, the amount of carbon dioxide going into solution will be extremely high. Where low-pressure steam is used that contains CO2 and the heat exchange process has relatively close temperature differentials between the steam and the condensate, there is potential for high uptake of the CO2 into the condensate and localized low pH.

Neutralizing amines are selected in an effort to condense in the right concentrations to carbon dioxide condensation levels throughout the steam system. Neutralizing amines cannot control corrosion where this localized accumulation of carbon dioxide occurs since the high CO2 overwhelms the demand for the amine. Even point source addition of amine may not be able to satisfy the demand.

Where the concentrating effect of CO2 occurs, methods of reducing the problem include eliminating or minimizing CO2 in the steam, venting off the CO2 in the localized area, eliminating condensate in the area, applying a filming amine or metal passivator, or using higher temperature steam and increasing condensate temperature to reduce the CO2 content in the condensate.

#BoilerWaterTreatmentCHEMICAL_supplierDUBAI
#BoilerWaterTreatmentCHEMICAL_supplierMUSCAT
#BoilerWaterTreatmentCHEMICAL_supplierMUMBAI
#BoilerWaterTreatmentCHEMICAL_supplierNAIROBI

A one-step and one SHOT treatment to control the formation of rust and scale in boilers. Contains alkaline compounds, scale and corrosion inhibitors, oxygen scavengers and sludge conditioners. which resulting in a scale and corrosion control by one shot operation.

Boiler water treatment speacialized chemical products One Shot Universal Liquitreat  Exporter, manufacturer, supplier in Mumbai, Gandhidham - Kandla, Mundra, Sikka, Surat, Kolkata - Haldia, Buz Buj, Paradip, Visakhapatnam - Gangavaram, Fujairah, Dubai, Sharjah, Abu Dhabi, Ruwi Barka Muscat Sohar, Oman, Sudan, Yemen, Nairobi Kenya

BOILER WATER TREATMENT chemicals manufacturer and supplier in INDIA, MUSCAT OMAN, UAE DUBAI, Nairobi

TESTING PROCEDURE :::
ANLYSIS PROCEDEURE OF SODIUM SILICATE : Take 5gm of sodium dilute it to 250ml in SMF with dist. Water , take 50 ml of the diluted solution add 2-4 drops of  methyl red indicator.  Then titrate it against IN {approx.}  HCL  Light Pink is the end point. Take this reading as “A” ml. To this solution add 5 gm of sodium fluoride dissolve properly add  6-7 drops of methyl red indicator titrate against IN HCL  appearance of slight pink colour is the end point . Take this reading as “B” ml 

Sodium Silicate Liquid Neutral, Sodium Silicate Liquid Alkaline & Sodium Silicate Powder Neutral Manufacturer. We also keeping ready stock of these materials...
Sodium Silicate Liquid Neutral

Sodium Silicate Liquid Alkaline
Sodium Silicate Powder Neutral
Sodium Silicate Powder Alkaline
Sodium Silicate Glass Neutral
Sodium Silicate Glass Alkaline
Silica Gel
Sodium Silicate
Activated Carbon
Sodium Metasilicate
Silicate Chemicals

We are manufacturing and exporting a broad range of  sodium silicate including Activated Carbon, Sodium Metasilicate and Sodium Silicate Glass Neutral. These products are used in Laundry soap, Detergent, Cement, Casting, Precept silica, Zeolite, Construction chemicals, Electrodes, Silica Gel, Oilfield chemicals, Paper making, Paper cones, tubes, Paints, Pigments and Foundry fluxes. 

Our manufacturing unit is situated in Gujarat India.  We are exporting our products in the international market successfully in Netherlands, Iraq, Malaysia, Saudi Arabia and UAE, Dammam, Gulf, and Africa.

Sodium Silicate Water Glass manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Sodium Silicate Water Glass at a competitive price from us. We have ready stock of Sodium Silicate Water Glass in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.