Deck cabin galley Maintenance-25

Cement Remover and Cleaner supplier in Krishnapatnam, Visakhapatnam, Gangavaram, Ennore, Chennai, Kolkata, Haldia, Paradip, Cochin, Goa, Manglore, Mumbai, Surat, Kandla, Mundra, Sikka - INDIA.

RXSOL-22-2202-025 turned this vulnerability into an opportunity. "Back-Set" safely removes hardened concrete from a variety of difficult to clean surfaces. It break down the ionic bond in portland cement, releasing the cement from any surface to which it has adhered.

This liquid mixture specifically designed to deal with hard cases of cement cargo deposits or dry cement stains. Its proven advantage is the provision of immediate penetration and complete dissolution of cement, the result being a thorough cleaning.

Chemically Back-Set converts the positive ions in the hardened matrix into negative ions, which dissolves the cement into mud that can be rinsed away. Because it works chemically, rather than mechanically, Back-Set may be used to remove cured concrete, mortar, grout, and stucco from virtually any surface without harm.

ACTIVE MATTER         : 98-100 %

WHY RXSOL-22-2202 is better ?

Biodegradable & non flammable , Economical very cost effective
Non-hazardous
Non-fuming
Safe for paint, chrome, aluminum, glass, rubber, plastic, brass & stainless
Dissolves cured cement, concrete, mortar, grout, stucco
Cleans aluminum
Also comes with a foaming spray nozzle
Will not remove rubberized cement
Suitable for the removal of cement deposits and dry stains.
Due to its higher concentration its chemical reaction is very fast.

It's chemical combination meet the requirements of paragraph 1.8.2 of the P&A Standards.

Cement Remover cum cleaner plays an important role to clean cement without scrubbing, which is resulting and damaging the smooth surface.  Its simple application method also helps to save manpower. Youtube cement remover video available with this link https://www.youtube.com/watch?v=GJzrh60-q5w

Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver as an alt

Cement remover from steel surface, cement remover chemicals manufacturer supplier and exporter from India and Middle East - UAE, cement remover from tiles, marble, granite, cement remover for car and automobiles, cement dissolver, grout and cement remover, removing cement stains, clean cement stains, cement remover from ship cargo hold, Cement remover bulk carrier, Cement remover railway carrier.

  

GREEN CR, Ship Hold Cleaning Cement Remover

Cement remover cleaner manufacturer, supplier, exporter Mumbai, JNPT, Kandla, Sikka, Navlakhi, Manglore, Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Haldia, Paradip, Fujairah, Sharjah, Abudhabi, Dubai, Barka Muscat OMAN.

34029019

HCF cleaner is neutral multi purpose tank cleaner which is colourless liquid with a characteristic odour. Its strong emulsifying and specific formula makes it miscible with sea water and fresh water. HCF Neutral is also suitable for most tank lining as zinc-silicate, epoxy  coatings , Stainless, Aluminium, Phenolic and most common metal surfaces (ferrous alloys, tin, zinc, aluminium and galvanized surfaces). HCF neutral is most popular tank cleaner for removal of vegetable and/or animal oils and fats and light mineral oils etc. Also know as Neutral HCF.

Characteristics: -

• Removes grease, oil, carbon deposits, soil and grime.
• Keeps loosened deposits in suspension preventing re-deposition.
• Low toxic.  , Non-flammable.
• Free from hydrocarbon solvents.
• Effective and economical in use , Water-based cleaner.
• RXSOL-20-2007-025 has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
• Non-corrosive to ferrous metals.  Suitable for all tank-coatings.
• Can be used for gas and hydrocarbon freeing of tanks.
• Can be used for deodorizing
• Contains wetting agents.

Note:- Completely miscible with sea water.

RXSOL-20-2007-025 HCF Cleaner is a very strong low foaming multipurpose cleaner. 

Neutral HCF is free from solvents to clean Vegetable, Animal oil etc from Ship and marine Tanks. Excellent neutral tank cleaner cum degreaser. This product is most popular among tanker operating charter and shipping agent.

HCF Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of HCF Cleaner at a competitive price from us. We have ready stock of HCF Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

We are classified as Marine Chemical Products and Tank Cleaning Chemicals supplier. We cover the full range of Marine Cleaning Chemicals which is Heavy Duty and economical to use. We are keeping ready stock of  Industrial Chemical Products, marine cleaning maintenance Chemicals, Boiler water treatment Chemicals, Cooling Water Treatment Chemicals, Fuel Oil treatment, Deck Cleaning Items, Oil Spill Dispersant, Tank Cleaner, Tank Clean, Rig wash, Carbon Remover, Deck Cleaner, Teak Renewer, Epoxy paint Solvented, water free hand cleaner, water free hand wash, biological toilet cleaner, all pupose cleaner, Oil Spill Dispersant, OSD Type I II, Heavy Duty Degreaser, Rigwash, Aqua Break, Sea-cleaner Plus, Alkaline Safety liquid etc at all INDIAN coastal and in Middle East.

Demineralised Water – Conductivity : < 10.0 Micromohms/cm.
TDS : 3 – 4 PPM,
Hardness – Nil  
Chloride – Nil,
Total Alkalinity : 5- 6 PPM
 

Total Matter, ppm Max : 100  - ASTM D5907

pH    : 6.5 - 8.5   ASTM D1293

Sodium + Potassium ppm, Max : 25 ASTMD4191 &4192

The water doesn’t contain larger suspended particle more then 100 microns

#DemineralisedWater_ManufacturerSupplier
#DMwater_ManufacturerSupplier
#DemineralisedWater_DUBAImuscatOMANsharjah

Demineralised Water DM Water manufacturer Turbhe Navi Mumbai, Gandhidham GIDC ANJAR, Howrah Andul Kolkata Haldia, Visakhapatnam, Chennai Dubai, Sharjah, Ajman, Abudhabi, Fujairah UAE, Muscat Barka Ruwi Ghala Oman, Kenya Nairobi, Canada

The products that we manufacture and supply are as per the  following standards:

• Indian Standard (IS) 1069, 1070, 7029
• International Standards Organisation (ISO) 3696 grade 1, 2, 3
• American Standards- A.S.T.M D-1193 grade & types 1,2,3,4

Distilled Water, Battery Distilled Water, Windshield Wiper Fluid, Distilled Water For Home, Industrial Water, SPA & Saloon Distilled Water, Radiator Coolant Water, Laboratory Water, Medicated Water, Aquarium Water and Saloon Distilled Water.

#DistilledWater_NaviMumbai
#DistilledWater_Dubai
#DistilledWater_Muscat
#DistilledWater_Nairobi
#Batterywater_Manufacturer
#Batterywater_Supplier

Distilled Water Battery grade manufacturer and supplier in Mumbai, Gandhidham, Visakhapatnam, Chennai, Ennore, Kolkata Haldia, Fujairah, Dubai, Sharjah, Abudhabi. RXSOL Brand Distilled Water Battery Grade largest manufacturer and supplier in Muscat Ghala, Barka Ruwi Oman, Nairobi Kenya Sudan Yemen

MAINTENANCE SCHEDULE ::: The maintenance schedule given here is divided in daily, weekly, monthly and yearly maintenance. The actions to be taken, checks and recording required are given herewith.
A.DAILY MAINTENANCE
1. A daily general maintenance should include a check and record of the following :
2. Overall float voltage measured at the battery terminals
3.Charger output current and voltage
4.Specific gravity, voltage and temperature of pilot cells.

B.WEEKLY MAINTENANCE
A weekly maintenance should include all the items mentioned in "daily maintenance" and the following :
1. Check electrolyte level of all cells and if required, top-up with battery grade water conforming to IS 1069. Never use metal vessels for topping up because of the risk of electrolyte continuation and accidental short circuit.
2. Visually check the conditions of each cell and battery bank. If abnormal or very high amount of sulphation on the terminals or connectors are observed, take immediate action in removing them.
3.Visually check the cleanliness of battery, battery stands and battery room area for accessibility, cell integrity and acid leakage.

C.MONTHLY MAINTENANCE
1. A monthly maintenance shall include all checks listed under "daily" and "weekly" maintenance schedule and also the following:
2.Check and record specific gravity, voltage and temperature of all cells in the battery bank.
3.Adjustment of specific gravity by addition of battery grade water is to be done only after charging and under skilled supervision (Never use acid for this purpose unless specifically suggested by manufacturer). After adjustment of specific gravity, charge the battery at a voltage around 2.4 volts per cell for a period of 2 hours for mixing of the electrolyte properly.

D.QUARTERLY MAINTENANCE
A quarterly maintenance shall include all checks listed under "daily","weekly" and "monthly" maintenance schedule and also the following :
1. Check and record specific gravity, voltage and temperature of all cells in the battery bank.
2.If the specific gravity of most of the cells are found to be lagging by an average of 10 to 15 points, the battery bank would call for an equalizing charge at a current equivalent to 3% - 5% of its rated value for 6-10 hours to restore the state of charge to full..
3.The temperature of the electrolyte normally is higher than the ambient. But for a bank, unless it has undergone a discharge within previous 24 hours, the electrolyte temperature should lie within 3
5 deg. C higher than the corresponding ambient temperature. In case of a deviation from this range, the charger needs to be checked for its quality of power output in terms of the ripple contents in the charging voltage and current. Corrective action should be immediately taken to avoid any deterioration in the battery bank due to this anomaly

E.HALF YEARLY MAINTENANCE
A half yearly maintenance shall include all checks listed under "daily", "weekly", "monthly" and "quarterly"
maintenance schedule and also the following :
1.Remove all corrosion product and clean connector thoroughly. Use enough amount of petroleum jelly on the connectors to prevent farther corrosion and put back shrouds in place.
2. Check the tightness of fasteners on inter-cell, inter-row and inter-tier connections to prescribed torque values as suggested by manufacturer. If required, tighten the connections to the required torque value .

F.YEARLY MAINTENANCE
A yearly maintenance should include all items listed under "daily", "weekly" and "monthly" maintenance schedule and also the following : Discharge the battery at C10 current for 10 hours followed by a constant current recharge.
The charging to start at the "starting rate" as mentioned in the product catalogue for the respective size till the cell voltage
reached 2.36 volts per cell followed by charging at "finishing rate" pertaining to the specific size of the battery as mentioned in manufacturer's catalogue. The charging to be stopped when the cell voltage and specific gravity readings are constant for four consecutive half hourly readings. The expected end-of-charge voltage is of the order of 2.7 2.75 volts per cell.
During charging it has to be ensured that a minimum Ah input of 125% of the previous discharged Ah is administered to the battery.
The temperature during charging should not increase beyond 450 C. In such cases, the charging to be stopped and the cells to be allowed to cool down till 400 C when the charging can be resumed. The timings are to be noted so that the duration of charge can be compensated accordingly to ensure that the minimum Ah input requirement is fulfilled. After the charging is over, gravity and level adjustments are to be carried out after a rest of 4 hour.
The battery bank, then, is to be given an equalisation charge at a current equivalent to 3% - 5% of rated C10 capacity for 12-24 hrs. The battery bank can be given back to the system after the equalising charge is over
.

Form: Clear liquid

Color: Light yellow

Specific Gravity: >1

pH value: 4.5 - 5.5 ( Effective over a broad pH range 5 - 9 Compatible with feed waters that contain aluminum and iron oxides )

Solubility in water: 100% soluble

Antiscalant Antifoulant Corrosion Inhibitor 704 Exporter, Manufacturer and supplier in India, UAE, Oman, Kenya. Antiscalant Antifoulant Corrosion Inhibitor 704 available ready stock at Mumbai, Nairobi, Kenya, Chennai, Kolkata, Visakhapatnam, Gandhidham, Kandla, Fujairah, Dubai, Ajman, Abudhabi, Dubai, Sharjah UAE Middle East, Canada, Jinja Uganda, Canada

Antiscalant Antifoulant Corrosion Inhibitor 704  helps to extend the membrane life and reduce the running cost.