Corrosion Inhibitor-44

RXSOL Odor Eliminator is different to nearly all other odour neutralisers or masking agents. The difference lies in the product makeup: nearly every product in the market is a blend of essential oils or plant extracts combined with a standard surfactant while RXSOL Odor Eliminator is made of food and cosmetic grade compounds and contain only 1% essential oils or plant extracts (by total volume of concentrate). Basic chemistry proves all essential oil and plant extract based products cannot truly neutralise odours; they can only mask them or encapsulate them for a period before releasing them again. Essential oils and plant extracts cannot bind to, and react with, a compound such as H2S and change the structure of that volatile compound into a non-volatile compound.

1) Fogging System 2) Vapour Phase System 3) Direct Dosing into liquid

It is worth explaining, that, unlike masking agents,RXSOL Odor Eliminator does not blow away in the wind. Being positively charged, it will seek out target molecules and bond to them resulting in a chemical reaction forming a non-volitile organic salt. If a RXSOL Odor Eliminator molecule does not find a target, it will attach itself to a negatively charged surface and wait for an odorous molecule. As with all gases, the odorous molecules are constantly moving and, given time, will come into contact with a  RXSOL Odor Eliminator molecule and be destroyed.

Fogging System:

Fogging systems spraying RXSOL Odor Eliminator  are used when odour is from open-air sources.RXSOL Odor Eliminator is sprayed on an interval basis depending on odour type and strength. An example of this is running the system for 30 seconds ON and 2 minutes OFF.

Some examples of facilities where fogging systems can be used:
 

• Waste Water/Sewage Treatment Plants
• Refuse Transfer Stations
• Steel Manufacturing Slag Beds
• Contaminated Soil Remediation
• Pig Farms
• Sludge Lagoons

Fogging systems spraying RXSOL Odor Eliminator  is also used in indoor facilities. Some examples are:
 

• Sewage Pumping Stations
• Slurry Pits

Vapour Phase Systems :

Vapour phase systems delivering  RXSOL Odor Eliminator is used when odour is from ducted, or confined, air sources. This type of application is designed to inject the vapour into a continuous flow air stream that is part of an exhaust or extraction process. These types of systems are delivering vapour into the air stream continuously. Some examples of these types of problems are:
 

• Manufacturing Process Exhaust Airflow
• Sewage Plant Air Extraction
• Sewage Pumping Stations
• ANY air emissions vented to atmosphere

Direct Dosing:

RXSOL Odor Eliminator  is exceptionally effective in capturing its target in a liquid solution. Liquid solutions only produce odours when they reach a point where cavitation occurs, say at the end of the pipe or weir. Odour is produced as a result of the reduction in water pressure and the odorous gases are stripped out of solution.

This method of application is ideal for waste treatment plants, animal and fish processing plants, and pig and chicken farms, which have wash down systems where waste water is collected and stored in a settlement pond system or holding tanks.

RXSOL Odor Eliminator  molecules will attach to the odorous compounds to remove toxins from the water and, over about seven days, will spread through the whole anaerobic/facultative/aerobic pond system to remove odours. This action chemically bonds (valency bond) to the odorous compound to form a non-toxic, non-odorous organic salt. Bacteria will then break down this salt. As a result, there is no increase in BOD, and no regeneration of foul odours.

RXSOL Odor Eliminator can best be thought of as a detoxifying catalyst that beneficially affects the pond ecology. It is extremely powerful.

RXSOL Odor Eliminator , which is not required to destroy toxic odorous compounds, will continue in the stream and neutralise any air that is stripped from the stream due to water turbulence at the treatment station or ponds.

Odor Eliminator Manufacturer Exporter and supplier in India UAE Oman Kenya Africa - Mumbai, Kandla Surat Gujrat, VASHI TURBHA NAVI MUMBAI Pune Nashik, Kolkata Haldia Paradip, Chennai Ennore, Visakhapatnam, Fujairah Dubai Ajman, Abudhabi, Sharjah Muscat Barka, Sohar, Nairobi Kenya Africa

APPLICATION : Boilers, calorifiers, heat exchanges, diesel engine cooling system, condensers, evaporators & other type of equipment where rust & scale form. 

Efficiency :Rapid Softening, disintegration and dissolving of scales.

Economy

By reducing down-time, productivity is increased. by protecting metal and by uniform leaning of the surface equipment life is prolonged and performance made superior. The above information is adequate for commonly encountered problems of descaling.

Handling & Storage

Safety

•    No Fumes Avoid contact with skin or eyes. Wear Cup-type, rubber or soft plastic-framed goggles, protective clothing, and rubber gloves must be worn when handling.

•    Keep in a tightly closed container. Protect from physical damage.

•    Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities.

•    Containers containing this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

•    Ensure as low exposure as possible. Local exhaust ventilation is generally preferred as it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.

The self-indicating grade that changes colours to indicate that the efficiency of material has been finished.
Colourless Solution showing Powerful Strength.
Light Brown-Yellow Solution indication Poor strength, In this stage addition of more powder required to dissolve the scale.
Blue colour solution will result in neutralization of Acidic Power, After completion of Descaling process system must be neutralized with ALKALI SOLUTION. When we'll put alkali solution into the used descaler - solution, Acidic power will get neutralized and BLUE colour will develop.

Suitable and very popular product for DESCALING of high and low pressure boilers, Heat EXCHANGERS etc. Its corrosion inhibitor blend PROVIDE metal protection

This is mixed with fresh water 3 to 20 percent depending on deposition of scaling. After using RXSOL-37-8865-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025 at least 2-4 house, up to neutrial of PH valve.
 

Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-37-8865-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more RXSOL-54-1008-025  until the red colour reappears. This should not be done more than twice. RXSOL-37-8865-025  should not be used on Aluminium , Zinc, Tin or Galvanized surfaces.

Fields: Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descale Powder.If salt is not available, an acceptable alternative is to dissolve RXSOL-37-8865-025  in  water. After use of RXSOL-37-8865-025  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.

Evaporators, Calorifiers, Heat Exchangers:
The strength of the acid can be enhanced by adding 1 part sodium chloride (common salt) to 20 parts of Descale Powder RXSOL-37-8865-025. This enhancement of the cleaning solution, however, should not be used when descaling diesel engine cooling water systems. After use of Descale Powder a 0.5% solution of Alkalinity Control in fresh water should be used for neutralisation.

After using  RXSOL-37-8865-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
 

Why Use RXSOL Descaler?

• It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
• You do not have to heat RXSOL-37-8865-025 .
  RXSOL-37-8865-025  is safer for the employees to use than other acid products.
• Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
•  Cleans down to the original surface without pitting.
•  RXSOL-37-8865-025 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
•  RXSOL-37-8865-025  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
•  Removing the scale build up allows your equipment to operate more efficiently with less down time.

Descaling Chemical manufacturers, Descaling Chemical suppliers, Descaling Chemical producers, Descaling Chemical exporters

RXSOL-37-8865-025 Descaler Descalant Powder with Colour Indicator manufacturer and supplier in Kakinada, Visakhapatnam, Andhra pradesh, Mumbai, Navi Mumbai MIDC, Panvel, Taloja, Pune, Nashik, Gandhidham, Kandla - GIDC, Mundra, Jamnagara, Sikka, Surat Hazira, Chennai Ennore, Kolkata, Howrah, Paradip,Sohar, Barka Muscat Oman, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Diera, UAE Middle East, Varanashi, Patna, Ranchi, Tata, Munger, Nairobi Kenya Africa, Canada

#SulfamicACID_AlexandriaEgypt

Why use Heat Transfer molten salts?

Heat Transfer Salt extend the upper range of the temperature limits in which a liquid heat transfer media can be used.

Heat Transfer Salt manufacturer and supplier in Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Barka - Oman, Muscat, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Oman Muscat Barka, Canada, Nairobi Kenya, Uganda Africa, Bahrain

PRODUCT PROPERTIES :  

Specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S, wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner. Also acts as the rustproofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.
 

Metals Britte is one of popular maintenance and cleaning chemicals in marine, shipping lines and oil field industries. You shouldn't use Acid like, vinegar, or HCl on rust to clean it because, although it initially dissolves the rust, it leaves the steel very active and prone to immediate re-rusting ("flash rusting"). What you want is Rust remover like Metals Clean Brittee and Rust Converter, which is phosphoric acid based detergent which has the capability of converting the dusty, flaky red rust to stable "black rust". In general Alkalis like lye also peoples are using which is good at dissolving oil and grease, but don't convert rust so metal starts immediate re-rusting.

Dont expose your precious metal parts to any chemicals, Many chemicals supplier only engaged to provide cheaper solution doesn't know chemistry of rust.  Rust Dissolving is chemicals process, Metals Britte is combination of Corrosion Inhibitor, Phosphoric acid, Proprietory blend of detergent and most important things Buffer mixture which is stands to protect metal against acid attack. 

We are not only sailing product in large scale, but also building strong relation with our users. Our daily study and knowledge in chemistry given us opportunity to develop and research many new products. We are bounded to provide best product to our customer. 

Characteristics:-

• Non-flammable.
• Prevents further rusting.
• Economical  , cost effective.
• Surface brightening
• Protects and maintains from corrosion
• Acts as rust proofing agent before the application of paints or coatings.
• It doesn’t  affect rubber and plastic compounds
• removes corrosion of all metals
• excellent cleaner to remove contamination of fats and salts Marine application for trains, busses, tank containers and ship tanks
• odourless, so it can be used in enclosed space
• suitable for manual cleaning as well as high- and low pressure systems

Super Dilac Acidic low foaming Detergent Metal Clean Britte is Cargo hold and Tank cleaning chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing. 

Super Dilac Acidic low foaming Detergent Metals clean Britte supplier in Gandhidham ( Kandla, Mundra, Sikka ),  Mumbai ( Nhava Seva, JNPT, BPT, Navi Mumbai Maharastra ), Chennai ( Ennore, Tuticorin ), Vizag ( Visakhapatname, Gangavaram ), Kolkata - Haldia, Paradip. Fujairah, Dubai, Sharjah - Middle East - UAE, Sohar Muscat Oman, Canada, Nairobi Kenya Africa

Why RXSOL Super Dilac Acidic low foaming Detergent Metal Clean Britte?

Super Dilac Acidic low foaming Detergent METAL Clean Britte effectively gives detergency as well as rust stain removing cleaning action immediately. Many local brands defining Metals Clean Britte as dilution of phosphoric acid to stand in the market and supply at a very cheaper price. Our continuous development and support of our R&D team enable us to produce a top-notch quality of Metals Clean Britte. Since 1995 we make our self to keep on top then another brand who is supplying Metals Clean Britte. Small drops of RXSOL Metals clean Bright chemically change rust causing elements in the inert atmosphere and RXSOL Super Dilac Acidic low foaming Detergent METAL Clean bright emulsifying detergent property cleans surface effectively and most important things safely. As during our long span of working time we observed that unbranded metal clean bright rapidly damaging smoothness of surface, So before selection and uses of Metals Clean Britte from unknown sources think twice to save your precious metal surface. Principally before uses of any Acidic materials, its buffer action required. Strong ACID with Weak Base as well as a Weak ACID with a strong base. Buffer action of Super Dilac Acidic low foaming Detergent Metals Clean Britte only can gives protection towards the metal surface.

IMPA code of Metals Clean Britte : 551081

Very effective and suitable for loading washing machine and for manual wash . Formulated with with optical brightener to further brighten clothing, Softening agent and pleasant fragrance to ensure clothing are soft  and fresh  after  rinsing  and spin dry.

Grease Soil Cutter HD manufacturer and supplier in Muscat Barka Oman, Fujairah Dubai Sharjah Abudhabi Ajman UAE Middle East, Nairobi Kenya Africa, Mumbai, Gandidhdam Gujrat, Vizag Visakhapatnam, Chennai Tamilnadu, Kolkata Bengal, Canada