Clean Air deodorizer-24

Seawater Hydrometer supplier in Dubai, Sharjah, AbuDhabi, Ajman, Fujairah UAE Middle East, Muscat Oman, Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Haldia, Howrah.

 INSTRUCTIONS FOR USE
1. A clean, representative sample of the supporting water should be obtained by means of a sampling can or other suitably designed sampling apparatus. A sample of at least 1 liter will help to ensure that the temperature and density do not change unduly between the collection of the sample and taking of the readings. The depth of water in the container must be sufficient to allow at least 25mm clearance between the bottom of the hydrometer and the bottom of the hydrometer and the bottom of the container. The internal diameter of the container or jar should be at least 50 mm.
2. The number of samples to be taken, also at which depths and at which positions outside the vessel they should be taken, may be important according to the circumstances.
3. Readings may be taken by lowering the hydrometer into a suitably shaped sampling apparatus or by transferring the water to a suitable glass test jar. If a metal or other non-transparent container is used for taking readings, ensure that it is full to the brim. If a glass test jar is used, it should preferably be rinsed first, so as to avoid undue temperature changes. The container or test jar should be shielded from draughts, which may affect the readings.
4. The reading must be taken in the sampling apparatus or glass test jar as rapidly as possible Undue delay in taking the reading could result in temperature changes leading to inaccurate results. In case of doubt, a repeat sample should be taken in order to verify the first observation
5. Ensure that the stem of the hydrometer and the surface of the water sample is free from grease and oil since the accuracy of the readings could be adversely affected
6. Hold the hydrometer vertically by the top of the stem and gently lower it into the water sample until it floats freely
7. Take the hydrometer reading where the level liquid surface meets the graduated scale.

CORRECTIONS TO HYDROMETER READING
1. For ydrometer the appropriate corrections should be applied.
2. For most Draft Survey purposes, no further corrections to the readings are needed.
Reading is most correct when the glass hydrometer is used at a temperature of 15°C. If immersed in water at temperatures higher or lower than 15°C, the instrument will expand or contract so that, for precise laboratory work, a small correction would be applicable However, for Draft Survey work, it should be noted that the ship itself will normally expand or contract according to the temperature of the water in which it is rating. The corrections required to compensate for these changes in volume are of opposite signs and tend to compensate for each other. As it is not practicable to calculate any temperature corrections for the ship, for most Draft Survey purposes no correction should be applied for the expansion or contraction of the hydrometer glass

Hydrometer Density supplier in India UAE Middle East Gulf Muscat Oman Nairobi Kenya.

Typical Properties :

Scale Inhibitor 4300 High Polymer supplier in Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Sharjah, Dubai, Ajman, Abudhabi, UAE, Ruwi, Barka, Muscat Oman, Yemen, Sudan, Canada

Odor: Odorless to acetic (Slight.)
Taste: Not available.
Boiling Point: Not available.
Melting Point: 324°C (615.2°F)
Critical Temperature: Not available.
Specific Gravity: 1.528 (Water = 1)
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water.
Solubility: Easily soluble in cold water, hot water.

Sodium Acetate CH3COONa manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Sodium Acetate CH3COONa at a competitive price from us. We have ready stock of Sodium Acetate CH3COONa in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Silica Gel Details
CAS No. : 112926-00-8
Chemical Name : Silica gel
CBNumber : CB1199389
Molecular Formula : O2Si
Formula Weight : 60.08

For proper functioning of transformer dehumidification of Silica Gel crystals & removal of dust particles from breathed air is necessary.

Moisture is removed from Silica Gel crystals by heating it inside a ventilated oven at to 150 C, until the color becomes deep blue again.

Dusts particles are filtered by the oil in the oil cup.Pressure value for air passage into the breather are: 0.003 Kg/cm inlet or 0.005 Kg/cm outlet.

Criteria for Selecting Silica Gel Breather :
Keeping in view the above functions of Silica Gel Breather the main criteria for selecting the breather becomes,

• Gel changes color from deep blue to pinkish white as it absorbs moisture. By reheating, the Gel becomes free from moisture & hence transformer always breathe in dry air. Visibility of Gel color is very important to decide when to reheat the Gel.
• Oil in the oil cup allows dust particles of air to settle in the oil. By changing the oil & cleaning the oil cup air becomes free from dust particles. Visibility of oil level & dust particle in the oil cup is very important to decide when to change the oil.
• Transformer should breath from breathing holes (provided in breather) only. If air enters through any other portion of the breather except breathing holes it is called leakage of air.
• Leakage of air will lead to entrance of air with moisture & particles in the transformer, which ultimately may lead to formation of spark, and short circuit in the transformer.

Breathing Process of Transformer :
Breathing is the process where the transformer Breather-In or Breather our the air from its body due to thermal contraction & expansion of oil mass. When the transformer is loaded or unloaded, the oil temperature inside the transformer tank rises or falls accordingly the air pressure inside the tank changes by either breathing in or breathing out the air. This phenomenon is called "Breathing" of the transformer. Now, the air which is being breathed in contains either dust particles and/or humidity that change the dielectric strength of the oil. For proper functioning of transformer, it is absolutely necessary that dielectric strength of transformer oil remains unimpaired. Hence, it is necessary that, the air entering into the transformer is free from moisture & dust particles.

Silica Gel Breather supplier in Fujairah, Dubai, Sharjah, Ajman, Oman- Muscat, Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham, Surat.

CASR No. : [7553 – 56 – 2]
EC-No. : 231-442-4
HS-No. : 2801 20 00
RTECSNN1575000
Poison class  : CH ) 2
Max. Allowable Concentration ( MAK ), Air : 1.1 mg / m3
LD 50 oral rat : 14 mg / kg
Packing category       : G
Road / Rail6.1 / 67 b
IMDG-Code61 / II UN 3290
IATA / DGR6.1 8 II UN 3290 CAO 615
PAX 613
Merck-Index10, 4881
Mol.  Formula : I2
Mol. Weight253.81
Specific Density, 20 0C4.93 g / cm3
Bulk Density~ 2100 kg / m3
Melting Range114 0C
Boiling Point185  0C
Vapour Pressure, 25 0C0.41 hPa
Solubility in H2O, 20 0C29 mg  per 100 ml
pH value ( saturated solution, H2O, 20 0C )~ 5.4
Atmospheric Susceptibilityslow sublimation

Iodine Derivatives Manufacturer in India

Iodine is the heaviest and the rarest of stable halogens that can be found on the crust of earth. Iodine is mostly used in nutrition. About fifty percent of all iodine produces and manufactured worldwide is used to form Organoiodine compounds.

Iodine deficiency in human body is the number one cause of preventable mental retardation and thyroid problems. Certain regions and especially coastal regions have iodine naturally in the soil. But it is rare in most of the Earth’s surface. Therefore iodine is added in small quantities in salt to provide the body with the much needed iodine. Generally, Potassium iodide or Potassium iodate is added to table/common salt, in order to prevent problems caused by iodine deficiency.

Iodine has several applications other than iodization of salt. It has a plethora of industrial as well as medical applications and is also used to provide nutrition to animals. The importance of application of iodine varies and some of the major uses of iodine derivatives are in colourants, dyes and pigments, animal nutrition products, catalysts, stabilizers, disinfectants and antiseptics, pharmaceutical, and photography. 

Iodine supplier and exporter from Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Dubai, Sharjah, Abu Dhabi, Ajman, Fujairah, Muscat, Oman and We are also pioneer as a Iodine supplier in Turbhe, Pawane, Mahape, Rabale, Taloja, Navi Mumbai - MIDC.  RX MARINE INTERNATIONAL is a leading Iodine derivatives manufacturer supplier in India.

Other Valuable Iodine and its derivative products :
Sr. No.Product Name                     CAS Number                   EC Number
1.3-5 – Di Iodosalicylic Acid           133-91-5                          205-124-0
2.Aluminium Iodide                         7784-23-8                        232-054-8
3.Ammonium Iodide                        12027-06-4                      234-717-7
4.Arsenic Iodide                               7784-45-4                       232-068-4
5.Barium Iodide                               13718-50-8                      237-276-9
6.Barium Mercuric Iodide                 10048-99-4                     231-831-9
7.Cadmium Iodide                            7790-80-9                       232-223-6
8.Calcium Iodate                              7789-80-2                       232-191-3
9.Calcium Iodide                              10102-68-8                     233-276-8
10.Clioquinol                                    130-26-7                         204-984-4
11.Copper Iodide                              7681-65-4                       231-674-6
12.Cuprous Mercuric Iodide             13876-85-2                     237-634-4
13.Ethyl Iodide                                  75-03-64                        232-191-3
14.Ethylenediamine Dihydroiodide   1774-47-6                      231-442-4
15.Hydriodic Acid   57%                  10034-85-2                      233-109-9
16.Iodic Acid                                     7782-68-5                       231-962-1
17.Iodine                                           7553-56-2                       231-442-4
18.Iodine Monochloride                    7790-99-0                       232-236-7
19.Iodophor                                      111453-42-0
20.Iohexol                                         66108-95-0                      266-164-2
21.Lithium Iodide                              10377-51-2                      233-822-5
22.Magnesium Iodide                       10377-58-9                      233-825-1
23.Mercuric Iodide                             7774-29-0                       231-873-8
24.Methyl Iodide                                7553-56-2                       200-819-5
25.Periodic Acid                                10450-60-9                     233-937-0
26.Potassium Iodate FCC                 12027-06-4                     231-831-9
27.Potassium Iodide                          7681-11-0                       231-659-4
28.Potassium Mercuric Iodide           7783-33-7                       231-990-4
29.Potassium Metaper Iodate            7790-21-8                       232-196-0
30.Potassium Tri Iodide Monohydrate12298-68-9                    235-567-5
31.Povidone Iodine                             25655-41-8                    215-034-3
32.Sodium Metaper Iodate                 7790-28-5                       232-197-6
33.Sodium Iodate                               7681-55-2                       231-672-5
34.Sodium Iodide                               7681-82-5                        231-679-3
35.Tetra Butyl Ammonium Iodide       311-28-4                          206-220-5
36.Tetra Ethyl Ammonium Iodide       68-05-3                            200-676-9
37.Tetra Methyl Ammonium Iodide    75-58-1                            200-881-3
38.Tri Methyl Sulphonium Iodide        2181-42-2                       218-555-4
39.Tri Methyl Sulphoxonium Iodide   1774-47-6                        217-204-2
40.Zinc Iodide                                    10139-47-6                        233-396-0